Reviews
As a replacement for OEMBlinker relay
I bought a battered 900SS (900SL) and am Restore.
In this situation, RearBlinker decided to change to ultra-small type LED's for various reasons.
The front is a Cowl recessed type, but since this is part of the body design, it is used as is, and the light bulbs inside are not converted to LEDs, but are left as they are.
This would be a hassle with bulbs in the Front and LEDs in the Rear, but times have evolved and there is now ICRelay, which supports a variety of wattages and makes everything look good.
The problem is replacing that ICRelay with the original Relay.
For ordinary Japanese cars, it is a 2-pole universal layout, so all you have to do is plug in the Conversion Connector that comes with the Relay, but unfortunately, DUCATI is a 3-pole Relay.
In addition, the connector is fixed to the body of the car, and the Relay is inserted into it, which is the opposite arrangement from that of domestic cars.
(For domestic cars, the RelayBody is mounted on the car body, and the Connector extending from the Harness is inserted into it.)
So we decided to disconnect and discard the UniversalConnector (Female side) from Relay and make our own Conversion Connector that would be Male-Male.
After carefully checking the terminal shape of the OEMRelay, I realized that it is the same as the H4Headlight Connector.
So I bought this Kit to create H4Connector.
Although there are a variety of female connectors that can be used with H4 Valve, there are only a few that can be used to create male connectors that reproduce the shape of the Valve.:Set is appreciated!
Unfortunately, the H4 and OEMRelay terminals had different widths, although the connector shape was correct.
The OEMRelay terminal width is about 6.4mm, and this H4 terminal is about 7.7mm wide, about 1.3mm thicker, so Quantity:Pair (for Left and Right) was shaved and prepared 0.6mm at a time.
However, the terminals are generated by folding a flat plate 180° with PRESS, so if both ends of the terminal are shaved, the folded part is lost and becomes RoseRose.
To avoid RoseRose, before shaving both ends, solder is poured inside the terminal to fix the PRESSED board firmly in place, and then both ends are shaved...Relay terminal is completed!
The completed terminal has a different width at the insertion point, but the rest of the terminal remains the normal H4 terminal shape, so it can be used by inserting it into an H4Socket as usual.
Just check the terminal positions of ICRelay and OEMRelay (they were in a position relationship that would not function if you stuck them in as they were) and assemble them.
We were able to connect the Relay receiving Connector on the car body side and the replaced ICRelay Connector while converting well.
The terminals included in the Connector set are gold-plated and magnificent, and their shape and strength are quite normal and perfect.
Male of H4Connector. It should be a rare occurrence, but if you are having trouble with HID or LED wiring, this is the perfect solution.
View detail
Just right!
In general maintenance
This amount should be enough.
View detail
Preliminary Fuse
Quantity for spare Fuse:This selling price for 1 Set of 3pcs. is inexpensive, which is helpful. I don't think I will use all of them. View detail
Preliminary Fuse
When I exchanged Main's Harness for Other Brand Product, it was a MINI flat type, so I bought it as a spare.
The price is reasonable and Quantity:1 Set of 3pcs. so I don't think I will use all of them, but it is worth having.
View detail
Connection
It is used for redoing Wiring.
Just Right Quantity:It was just the right number of pieces to reASSY in a set.
View detail
Exchange, Spare
I bought this for replacement installation and spare.:1 Set of 3pcs., affordable and helpful.
How about the quality? I don't know, but I thought it was good since it is Fuse.
View detail
Spare
I seem to have shorted it when replacing Blinker's Relay, so I bought this for a spare.
Quantity:1 Set of 3pcs., The selling price was very reasonable.
View detail
useful
I have purchased it several times and it is very useful to have it on hand for use in small places.
No durability issues.
View detail
Just the right size to organize your Wiring.
[How is it used?
I used it to put together Wiring to add DriveRecorder-etc.
I only had the White Tie Band on hand, so I chose this size which was in stock in inconspicuous Black.
Was the one you received as per Image?
To be honest, even if the size is written, I do not know the Image of the size feeling, I chose appropriately, but it was just right. lol.
I thought it would come with a Rubber Band like in the product photo. I thought so, but it was in the bag properly.
How was your experience with it?
It's a normal Tie Band, and it's a good size to organize your wiring.
I'm hoping the fact that it's a weatherproof Type means it'll hold up!
Also, not only this product, but the Tie Band bag is good because if you open it from the side as shown in the picture, it won't come out of the bag.
【Review】
It has a good size and is useful for organizing wirings or anything else.
As it comes in a pack of 100, well, if you are a normal person, I think buying this will be enough.
The Tie Band can be bought even in the 100-yen etc., but it is safe to choose the solid thing which is weatherproof if the price difference is about Juice1 pc anyway.
View detail
If only I had this!
[How is it used?
I've been using it for about a month now.
Was the one you received as per Image?
It was just like the picture and as Image.
How was your experience with it?
I've lost the one I was originally using, so when I need to clean up a batch of Wiring or
I bought this because I keep it with my in-car tools for use in emergencies.
The price is cheap, and it is very useful because there is no lack of strength because it is cheap.
If you are in a state where you can drive yourself, I think you can get by with a Tie Wrap at worst.
The uses are as diverse as your ingenuity.
Even if you don't do much motorcycle maintenance, I think it's a good idea to keep it in your on-board tools.
[Points to note]
Of course, do not use it around the exhaust system because it is weak against heat.
How did it compare to other products?
I feel like it's more solid than the Webig Garage product.
(We BigGarage's would often break off when tightening)
View detail
SUPER Versatile Items
In addition to binding the wiring, the Hemp palm has many other uses, such as temporary fixing of various parts, fixing the brake lever and pedal during maintenance, etc. The size can be bought at the home center up to 300mm long. I have a lot of them in my garage.
By the way, when the Rear blinker of BuellXb12r was broken by the vibration while touring, I fixed it temporarily with the in-Hemp palm pack which I always have and surpassed it.
View detail
I have it on hand in my motorcycle at all times.
Motorcycle Side Back and Maintenance.
I bought it to fix the brake lever.
Because it is sturdy and disposable after temporary treatment
It is very useful
There's a toolbox in the car.
I always have about 10 of them in there with the tools.
View detail
Sufficient performance
The other company's product we used before was inexpensive, but lacked strength and accuracy, so we ended up losing money by buying cheap.
This product is not the cheapest by any means, but it is solidly strong and accurate.
I opened one bag and visually checked for defects, but everything was molded tightly and there was nothing that could be called defective.
The LEADTime is short and excellent for wear and tear.
I can recommend it
View detail
Active in a variety of situations
It is very useful for a wide range of applications, mostly for bundling wiring, but it can also be used to lock the front tire on a motorcycle during maintenance. It's a good cosmetic product, and there is enough to go around. View detail
Thin but strong
Is it thinner and larger than I expected? But when I used it, it was surprisingly solid and never broke or tore off Mm
Often a poorly made Band will get hit by UV rays and become bruised and torn off I've been using it in a hot spot right next to the Engine for a year in the wild and have had no problems
Necessary and sufficient
View detail
Cospar good
This is Large sturdy, though it was thinner than I expected
The strength is fine and I will use it more and more
I would like to buy something a little thicker
View detail
Quantity : 1 Set of 3pcs. is
Quantity : 1 Set of 3pcs. is.
Replace Fuse because it has expired. I do not know whether it's good or bad as it's my first exchange, but there is no problem after replacement.
Fuse seems not to be disappearing so so it seems likely to be for the time being.
View detail
Whether it is problematic to handle indoor use
I bought without confirming it is White. It is for so-called indoor use.
Products dealing with Motorcycle supplies, which are not supposed to be used outdoors ... It is Lineup that doubts the product policy of WEBIKE itself.
View detail
Only by using a stronger Valve, a light did not turn on but it was moreover damaged to the Fuse. Since it is , it cannot but exchange, and when cheap, especially even if it is, there is also no fault. I think that the Fuse may be partly loaded i
Only by using a stronger Valve, a light did not turn on but it was moreover damaged to the Fuse.
Since it is
, it cannot but exchange, and when cheap, especially even if it is, there is also no fault.
I think that the
Fuse may be partly loaded into the Spare.
View detail