Reviews
Used for Tire Replacement
Anyway, it's cheap!
I recommend it because it is a price that makes Tire replacement easy!
It's properly three for the price!
I am going to try to replace the Tire on the CUB110.
View detail
As a replacement for OEMBlinker relay
I bought a battered 900SS (900SL) and am Restore.
In this situation, RearBlinker decided to change to ultra-small type LED's for various reasons.
The front is a Cowl recessed type, but since this is part of the body design, it is used as is, and the light bulbs inside are not converted to LEDs, but are left as they are.
This would be a hassle with bulbs in the Front and LEDs in the Rear, but times have evolved and there is now ICRelay, which supports a variety of wattages and makes everything look good.
The problem is replacing that ICRelay with the original Relay.
For ordinary Japanese cars, it is a 2-pole universal layout, so all you have to do is plug in the Conversion Connector that comes with the Relay, but unfortunately, DUCATI is a 3-pole Relay.
In addition, the connector is fixed to the body of the car, and the Relay is inserted into it, which is the opposite arrangement from that of domestic cars.
(For domestic cars, the RelayBody is mounted on the car body, and the Connector extending from the Harness is inserted into it.)
So we decided to disconnect and discard the UniversalConnector (Female side) from Relay and make our own Conversion Connector that would be Male-Male.
After carefully checking the terminal shape of the OEMRelay, I realized that it is the same as the H4Headlight Connector.
So I bought this Kit to create H4Connector.
Although there are a variety of female connectors that can be used with H4 Valve, there are only a few that can be used to create male connectors that reproduce the shape of the Valve.:Set is appreciated!
Unfortunately, the H4 and OEMRelay terminals had different widths, although the connector shape was correct.
The OEMRelay terminal width is about 6.4mm, and this H4 terminal is about 7.7mm wide, about 1.3mm thicker, so Quantity:Pair (for Left and Right) was shaved and prepared 0.6mm at a time.
However, the terminals are generated by folding a flat plate 180° with PRESS, so if both ends of the terminal are shaved, the folded part is lost and becomes RoseRose.
To avoid RoseRose, before shaving both ends, solder is poured inside the terminal to fix the PRESSED board firmly in place, and then both ends are shaved...Relay terminal is completed!
The completed terminal has a different width at the insertion point, but the rest of the terminal remains the normal H4 terminal shape, so it can be used by inserting it into an H4Socket as usual.
Just check the terminal positions of ICRelay and OEMRelay (they were in a position relationship that would not function if you stuck them in as they were) and assemble them.
We were able to connect the Relay receiving Connector on the car body side and the replaced ICRelay Connector while converting well.
The terminals included in the Connector set are gold-plated and magnificent, and their shape and strength are quite normal and perfect.
Male of H4Connector. It should be a rare occurrence, but if you are having trouble with HID or LED wiring, this is the perfect solution.
View detail
Just right!
In general maintenance
This amount should be enough.
View detail
Improved serviceability
[How is it used?
TRIAL vehicles are crammed with parts in a small space, and in the case of the ScorpaSY250R, it is not even possible to see the plug without removing the fuel tank, even though plug replacement seems simple at first glance. For this reason, we decided to install this Fuel Joint, which can separate the Fuel Hose with one-touch so that the Fuel Tank can be easily removed.
Was the one you received as per Image?
It looks quite gutsy.
Was the installation difficult?
Technically, it is not difficult, but as you can see in the picture, the length of the Fuel Hose before and after the Joint is very short because it is installed in a narrow space. Fortunately, we were able to install it almost in a straight line.
How was your experience with it?
One-touch allows the Fuel Hose to be separated, which improves serviceability.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
It is functional enough, but it would be nice if it were more Compact. It would be especially nice if the overall length could be shortened.
Other items that would be helpful
Point or hang for installation:When removing the Joint, it is good to prepare Dustcloth because a little Gasoline in the Joint will spill out.
View detail
Just the right size to organize your Wiring.
[How is it used?
I used it to put together Wiring to add DriveRecorder-etc.
I only had the White Tie Band on hand, so I chose this size which was in stock in inconspicuous Black.
Was the one you received as per Image?
To be honest, even if the size is written, I do not know the Image of the size feeling, I chose appropriately, but it was just right. lol.
I thought it would come with a Rubber Band like in the product photo. I thought so, but it was in the bag properly.
How was your experience with it?
It's a normal Tie Band, and it's a good size to organize your wiring.
I'm hoping the fact that it's a weatherproof Type means it'll hold up!
Also, not only this product, but the Tie Band bag is good because if you open it from the side as shown in the picture, it won't come out of the bag.
【Review】
It has a good size and is useful for organizing wirings or anything else.
As it comes in a pack of 100, well, if you are a normal person, I think buying this will be enough.
The Tie Band can be bought even in the 100-yen etc., but it is safe to choose the solid thing which is weatherproof if the price difference is about Juice1 pc anyway.
View detail
If only I had this!
[How is it used?
I've been using it for about a month now.
Was the one you received as per Image?
It was just like the picture and as Image.
How was your experience with it?
I've lost the one I was originally using, so when I need to clean up a batch of Wiring or
I bought this because I keep it with my in-car tools for use in emergencies.
The price is cheap, and it is very useful because there is no lack of strength because it is cheap.
If you are in a state where you can drive yourself, I think you can get by with a Tie Wrap at worst.
The uses are as diverse as your ingenuity.
Even if you don't do much motorcycle maintenance, I think it's a good idea to keep it in your on-board tools.
[Points to note]
Of course, do not use it around the exhaust system because it is weak against heat.
How did it compare to other products?
I feel like it's more solid than the Webig Garage product.
(We BigGarage's would often break off when tightening)
View detail
SUPER Versatile Items
In addition to binding the wiring, the Hemp palm has many other uses, such as temporary fixing of various parts, fixing the brake lever and pedal during maintenance, etc. The size can be bought at the home center up to 300mm long. I have a lot of them in my garage.
By the way, when the Rear blinker of BuellXb12r was broken by the vibration while touring, I fixed it temporarily with the in-Hemp palm pack which I always have and surpassed it.
View detail
I have it on hand in my motorcycle at all times.
Motorcycle Side Back and Maintenance.
I bought it to fix the brake lever.
Because it is sturdy and disposable after temporary treatment
It is very useful
There's a toolbox in the car.
I always have about 10 of them in there with the tools.
View detail
Sufficient performance
The other company's product we used before was inexpensive, but lacked strength and accuracy, so we ended up losing money by buying cheap.
This product is not the cheapest by any means, but it is solidly strong and accurate.
I opened one bag and visually checked for defects, but everything was molded tightly and there was nothing that could be called defective.
The LEADTime is short and excellent for wear and tear.
I can recommend it
View detail
As a hydrationHose joint
I bought this for my Hydration that I use for Endurance for Race.
As for the Hydration itself, you can buy a suitable one for Running or something like that, and if you cut the Hose in the middle and fit it, it becomes a convenient Hose that can be removed.
It is convenient because it can be separated from the leather suit without having to remove the Back attached to the leather suit.
View detail
It is a useful tool
It is in use in the first Motorcycle, purchased for the second machine this time.
The thing which I bought before is Manufacturer difference or the price was about 2000 yen.
Because the shape is exactly the same, is it just the difference in price?
I expect durability.
View detail
Tire exchange and ChainAlignment adjustment
I bought it for Tire installation after Tire exchange
In the textbook, I think it would be nice to fit with Swingarm's scale, but as I thought it was too much,
"Make the Length of the Bolt that jumps out the same" etc.
It was written.. Since these two do not match and it is not a new car, the distortion of the body and Swingarm etc etc. Maybe there is something, so maybe to some extent - - - I found this item where I was thinking. It is easy to install, and you can see that Alignment of the rear wheels changes with slight Nut tightening when you adjust. I convinced with their eyes and fixed the rear wheels.
I want to have one for this price.
View detail
For tension adjustment of Chain ...
With Sprocket in between Red Parts and Bolt,
Read the direction of Chain with elongated Shaft.
Because the price is affordable, I tried purchasing.
From the adjustment that depended on feeling again, the work was completed securely and reliably.
View detail
Chain adjustment is easy.
With adjustment of Chain line Quantity : Pair (for Left and Right) It is rather troublesome to match,
It takes a tremendous amount of time to stick to it.
(It has nothing to do with the model of PRO ARM or EccentricShaft)
However, with this tool you can adjust it straightforwardly in a short time.
There is Cover on top of Chain, no car type with no space (Also our GSX-R1000) It is
It is necessary to remove Cover and adjust it,
Removal time (time) Even if you compare the time without using this tool
It seems better to use this tool surely.
View detail
Under DAEG's Side Stand (During Touring)
Material is thick and solid.
It can be taken without problems if the weight of DAEG is around.
Small Type - lightweight (Male palm slightly larger Large) Because it is convenient to carry in the outside Pocket of Bag.
Gravel parking lot (Gravel or Small Stone?) I used it but I was not dissatisfied at all.
View detail
(NO ? ?) Easy to understand
【What made you decide the purchase?】 Purchase casually in matching money
【How was it actually used?】 It is good to see insanity with one eye by one eye, it was good not to remove the Chain case (Although it is Chain caseOther Company Product)
【Mounting was difficult?】 I think that it is the reverse of the original installation, but I do not have to stare at the Line
【Please tell me the installation point and hang】 It is necessary to install it parallel to the Sprocket.
[Is there anything I was disappointed about?] Because I did not expect it because it did not matter until now, so in a good way
【Hope for Manufacturer - Please let me know if there are any improvement points】 I do not need a needle looking at the vertical, I can not see it when I keep Chain cover
【Have you compared items?】 There is not it.
[Others] Cost effective is Large
View detail
Is there such a product !!!
Tire exchange, Chain exchange, adjustment of elongation. Previously I visited and checked Alignment on Vernier calipers, Axle Shaft and Memory of Swing arm. I happened to order Chain and found this item so I bought it. The driving part is a very important part leading to accidents, so there are more things that can be confirmed and the feeling of security has increased.
It is a solid and reliable tool to make.
It was Parts who seemed to have bought a sense of security !!
View detail
PROTOOLSProfessional tool Chain Alignment Tool
Until now I was doing with the scale and visual check, but my eyes became invisible with my age (It is getting worse) I tried using it.
Once I tried to install it, I understood that it was slightly misaligned so I was able to adjust it.
In my case Chain cover (Inner fender) It is a little troublesome in case you have to remove.
Depending on the model, I think there are some vehicles to remove,
I think that it is a useful tool even if you deduct it.
It is a simple tool but since it is an adjustment tool, I think that it will be for even more if it is attached with a simple instruction manual.
View detail