Reviews
Exchange, Spare
I bought this for replacement installation and spare.:1 Set of 3pcs., affordable and helpful.
How about the quality? I don't know, but I thought it was good since it is Fuse.
View detail
useful
I have purchased it several times and it is very useful to have it on hand for use in small places.
No durability issues.
View detail
Compact
Small, discreet and nice!
Installed on MotorcycleFront CB400T
For securing your Motorcycle during transport!
View detail
Fuel joint
It is easy to remove the hose when setting the carburetor, so you can work smoothly.
It would be better if it was a little more Compact.
View detail
It's not much of a problem to use it.
It's convenient to use it either suspended or flat, but if you're trying to apply enough pressure to send Gasoline to the Carburetor, you'll still have to hang it.
The root that connects the Hose to the Hose will leak, although not in the amount that it is Large if you don't use the Hose Band.
As for a point of complaint, because there is no hole in the Cap, when the cap is closed, Large pressure does not apply, Gasoline does not come down. When you use it, you should make a small hole in the cap with a drill.
I would like to be able to use it with the lid closed for safety reasons.
By the way, the inside diameter of the included Hose was 6mm, which is thin for LargeEngine Displacement Volume cars.
View detail
Active in a variety of situations
It is very useful for a wide range of applications, mostly for bundling wiring, but it can also be used to lock the front tire on a motorcycle during maintenance. It's a good cosmetic product, and there is enough to go around. View detail
Thin but strong
Is it thinner and larger than I expected? But when I used it, it was surprisingly solid and never broke or tore off Mm
Often a poorly made Band will get hit by UV rays and become bruised and torn off I've been using it in a hot spot right next to the Engine for a year in the wild and have had no problems
Necessary and sufficient
View detail
Cospar good
This is Large sturdy, though it was thinner than I expected
The strength is fine and I will use it more and more
I would like to buy something a little thicker
View detail
It looks cheap but practical
When the item arrived, I thought it was crappy PlasticPlate.
I mentioned that you should use it in a flat place in the Instruction Manual.
But since I want to use is on the gravel, I can use it without problems if I use it with knowing to break. It was about dirty without break even after use.
Material : Because it is light, it's small, so carrying is no problem. I have not used it yet in the muddy, but I think that I can probably use it because there is also an area. Although it is cheap and it can be used as a disposable feeling, it is likely to be indebted for the time being.
I use it with BANDIT 1200.
View detail
Quantity : 1 Set of 3pcs. is
Quantity : 1 Set of 3pcs. is.
Replace Fuse because it has expired. I do not know whether it's good or bad as it's my first exchange, but there is no problem after replacement.
Fuse seems not to be disappearing so so it seems likely to be for the time being.
View detail
To prevent scratches on the ground surface, to prevent falls
Orange color is noticeable.
Material imagines soft and soft material
I was doing, but it's quite hard
It was resin..
Side Stand tip attached to the car body
It is wider than the ground plane
Asphalt is softer than gravel
You can use it without sinking even on the ground.
Groove is also cut on the back side, and it is hard to slip
I think that processing has been done.
There is a hole in Body,
I do not understand how to use it.
Perhaps, using that hole
String etc.. Forgotten to prevent using ...
When used to some extent, at what position
Although it is easy to understand whether STAND can be multiplied,
It took a while to get used to it.
Rather than overturning on the road,
If you have one
"I will not die ..." To STANDPAD
It may be!
View detail
Please do not miss the old model Tank!
There is difference in serviceability between the presence of this item and the absence of this item.
When doing various kinds of maintenance, maintenance is possible mostly by removing Seat and Tank mostly.
There is one Hose in Tank's way, connecting Right and Left Side. It is troublesome to clamp this out for maintenance.
If you install this product you can finish with One-touch, so if you are going to maintenance well the old car ride will recommend the purchase.
View detail
I know madness of Alignment
I used it with KLX 125
This car looses Chain frequently so purchase for adjustment
The work we were doing in appearance became a bit more accurate
I can confirm the Well if the confirmation round bar is a little longer, but it is a needle for the vertical level but the movement is confusing and it can not be reliable. It's Minus ★ because it's together even if it's not there
Screw part is Plastic, but because it is the king who wants to tighten hands, strength etc etc. Is there no problem?.
View detail
TwisterSocket
Screw stuck firmly when I was Rose Engine, I could not get out of Spanner and licked Bolt's head. As I checked it with Net, I bought it immediately because it was easily removed by TwisterSocket.
Actually it was a hard time but I was getting offhanded, there are no losses with having to rely on the last.
View detail
Only by using a stronger Valve, a light did not turn on but it was moreover damaged to the Fuse. Since it is , it cannot but exchange, and when cheap, especially even if it is, there is also no fault. I think that the Fuse may be partly loaded i
Only by using a stronger Valve, a light did not turn on but it was moreover damaged to the Fuse.
Since it is
, it cannot but exchange, and when cheap, especially even if it is, there is also no fault.
I think that the
Fuse may be partly loaded into the Spare.
View detail