Reviews
XR250,XR400 common use?
Since I have the One-touchDrain bolt, I ordered it at my own risk because I thought I could get Clearance with the XR400 Under Guard.
The PRO's Kill Under Guard is installed by removing the OEM Under Guard Pipe.
The included Bolt, Washer, Nut, and Collar are blended with Included Parts:and what you have on hand, and replaced with what is easy to use.
If the product is a 250 item, the Bolt included is probably Quantity:I think it is in the Set.
No modification is required for installation.
It is a perfect fit. However, the rear end is bent by hydraulic press on the premise of avoiding LINK interference when installing the Linkage Guard.
For the oil bolt, the box wrench can be accessed straight through the hole in the under guard if the bolt is used as usual.
One-touchDrain bolt also avoids this, maybe together? I thought.
Oh, and as for weight comparisons.
? Under Guard of a Manufacturer (Solid Type) Over 1kg
OEMOption Resin Guard + OEMUnder GuardPipe850g
PRO'S KillUnder Guard700g
Therefore, it can contribute to weight reduction.
View detail
Fits: KAWASAKI KLX300R, KAWASAKI KLX250ES, KAWASAKI KLX250SR, KAWASAKI KLX250, KAWASAKI KLX250R (Competition), KAWASAKI KLX300R, KAWASAKI KLX250ES, KAWASAKI KLX250SR, KAWASAKI KLX250, KAWASAKI KLX250R (Competition)
It's a good Guard, but...
It was attached to the vehicle when I purchased it. It seems to be perfectly fine for driving on normal forest roads.
I often go to HardEnduro-leaning mountains, but depending on how the belly rubs and how it's applied, 4 OEM mounting screws will break or fly off the screws. I'm fixing it with the Iron Band now because I'm afraid I won't be able to get rid of it.
We are planning to replace it with a product with a wider Guard range soon.
View detail
Fits: HONDA CRM80, HONDA CRM50, HONDA CRM80, HONDA CRM50
Goods are good, but expensive Parts
I only know the commercially available Skid plate for CRM 80.
Because it is Exclusive Design, installation is very easy and it can be fixed firmly.
After attaching it, pick up the sound that the Small stone hits with a fair sound when traveling on a galley etc..
Just by imagining that the engine crashed and immobilized hitting a rock etc, it creeps.
The Main person to go to the forest road Recommendation for wearing also for Engine protection.
However, because the car body is small for CRM 80, it is not a type covering both SIDE of Engine, so we felt that protection is inferior to other car models and Skid plate of Others Manufacturer.
* We consider it to be sturdy on a lightweight Skid plate. It's never a bad product.
View detail
Feels good
Very lighter with exchange from OEM, dry sounds echo. The volume will rise slightly, but an elegant very good sound will echo. Glass Wool is also exchangeable and it seems to be used for a long time. View detail
Fits: KAWASAKI KLX300R, KAWASAKI KLX250ES, KAWASAKI KLX250SR, KAWASAKI KLX250, KAWASAKI KLX250R (Competition), KAWASAKI KLX300R, KAWASAKI KLX250ES, KAWASAKI KLX250SR, KAWASAKI KLX250, KAWASAKI KLX250R (Competition)
PRO SKILLPRO ス カ イ ル : Under Guard
Exchange at the same time as purchase
It prevents stepping stones at the forest road.
(It sounds pretty much GunGun)
So, quality and appearance are not bad - - -
Honestly, a bit more up (Water pump and Hose area) I wish I had Cover up to
Oil replacement can be done as it is because there is a hole in it.
View detail
Engine origin, for Crankcase protection
I bought Aluminum Plate and thought that I would make it myself, but when considering my hourly wedding that I was going to have trouble, I thought that it was better to buy, so purchase.
No, I was surprised because 5 thousand yen was higher than a few years ago.
In Manufacturer 's Hompe, stock was supposed to be in stock and the price was 17500 yen, but when was the information on?
I guess it takes more than 10 days to delivery, is it Production to order possibly?.
Even those that arrive are not expensive due to protective Film and simple curing.
Moodly, there was one close to One-off.
The thickness of the Material is about 3 mm, so you can customize it! The installation finished in 10 minutes.
I thought that it was unlikely to be removed, use Screw lock and stop Bolt.
With this, you can cross a fallen tree with confidence.
View detail
Fits: KAWASAKI KLX300R, KAWASAKI KLX250ES, KAWASAKI KLX250SR, KAWASAKI KLX250, KAWASAKI KLX250R (Competition), KAWASAKI KLX300R, KAWASAKI KLX250ES, KAWASAKI KLX250SR, KAWASAKI KLX250, KAWASAKI KLX250R (Competition)
A right thing full of holes is pure.Which is good? if it sees, does it understand?If attachment also removes that authentic positive, it will end with one Driver.It is whether it is better to use a Screw-lock agent.
A right thing full of holes is pure.Which is good? if it sees, does it understand?If attachment also removes that authentic positive, it will end with one Driver.It is whether it is better to use a Screw-lock agent. View detail
[a Webike Monitor] -- tone quality is pure -- more -- just for a moment -- a Race ish. sound volume does not change that it is pure. It is not known that and others do not run to a slight degree.
[a Webike Monitor] --
tone quality is pure -- more -- just for a moment -- a Race ish.
sound volume does not change that it is pure.
It is not known that
and others do not run to a slight degree.
View detail
Fitted to DT230 with no problems. All necessary attachments and instructions were supplied. A nice unit made by people with pride in their product. 1 kg lighter than the original silencer and only a little louder. Bike revving more freely. Designed to be
Fitted to DT230 with no problems. All necessary attachments and instructions were supplied. A nice unit made by people with pride in their product. 1 kg lighter than the original silencer and only a little louder. Bike revving more freely. Designed to be easily repackable. Very happy. View detail
Since the pure Silencer tattered, it exchanged. Although it is a thing only for Race, it is farther [ than the Silencer used for 18 years ] quiet. A point exchangeable even if the noise reduction material in deteriorates is also GOOD! Considera
Since the pure Silencer tattered, it exchanged.
Although it is a thing only for
Race, it is farther [ than the Silencer used for 18 years ] quiet.
A point exchangeable even if the noise reduction material in
deteriorates is also GOOD! Considerably pleasing, since
appearance is also beautiful.
View detail
Sound is not so annoying although it is an object for Races. Appearance is also pleasing.
Sound is not so annoying although it is an object for Races. Appearance is also pleasing. View detail
Fits: KAWASAKI KLX300R, KAWASAKI KLX250ES, KAWASAKI KLX250SR, KAWASAKI KLX250, KAWASAKI KLX250R (Competition), KAWASAKI KLX300R, KAWASAKI KLX250ES, KAWASAKI KLX250SR, KAWASAKI KLX250, KAWASAKI KLX250R (Competition)
I wanted resin by this type. if a stone hits -- Choto -- noisy kana.
I wanted resin by this type.
if a stone hits -- Choto -- noisy kana.
View detail
It was attached to TS200R purchased in medieval times. Also when it had ridden on TS200R in fact a long time ago, the same thing was used, but it is a product which may be light and may be quiet. It is really quiet if a chamber is pure. Althou
It was attached to TS200R purchased in medieval times.
Also when it had ridden on TS200R in fact a long time ago, the same thing was used, but it is a product which may be light and may be quiet.
It is really quiet if a chamber is pure.
Although alumnus-M1 is not a JMCA authorization article, I reveal and think that it does not become a problem in the noise (of course, use on a public road becomes self-responsibility).
Incidentally this TS was explosive sound roaring frightful at the time of purchase.
The cause was that tar and water accumulated in the silencer and the silence part was not functioning.
Internal wool included whether it sank by some causes for impossible grade moisture, and the silencer was a weight more than double [ of original weight ]... Since this silencer can be decomposed into Quan Tan only by removing two screws,
By Mr. Webike, I had the wool of a spare ordered and it carried out decomposition cleaning.
Although it was HONE that drops the carbon got blocked in punching, new quietness was able to be regained perfectly.
Although I think that the cheap wool for building materials etc. may be used, the original manufacturer's product of pro skill can also be purchased for about 1500 yen.
Since needle punch is struck and it has operated orthopedically to mat state, it is easy to roll pure wool.
Since a pure silencer cannot do OH even if it gets it blocked in a heavy top, it is one recommended article also in a meaning called Kougami of conservativeness.
The thing whose price is cheaper than a rival candidate's RSV cannot be overlooked, either.
View detail
Although it was exchange of only a silencer, it was attached simply. The omission is good certainly. Although it exchanges although it seemed that sound volume was hardly different from normal, either, when it exchanges, and 3~4 months pass (the p
Although it was exchange of only a silencer, it was attached simply.
The omission is good certainly.
Although it exchanges although it seemed that sound volume was hardly different from normal, either, when it exchanges, and 3~4 months pass (the peak is run about 50 km of days of the week almost every day), when it asks those who are running together, sound is if it is large certainly.
View detail
Since oil is not simple and has hung down from the drain of a pure silencer, exchange is considered. If changed at any rate, it thought that it was better whether to be able to carry out glass wool exchange, and arrived at pro skill. Sound is comp
Since oil is not simple and has hung down from the drain of a pure silencer, exchange is considered.
If changed at any rate, it thought that it was better whether to be able to carry out glass wool exchange, and arrived at pro skill.
Sound is completely quiet.
It is an equivalent grade that it is pure.
a few is the touch which the changed admiration could boil to some extent and 2 SUTOSAUNDO could carry out.
Merely ... Since there is no drain pure, the collected oil will go where? It may be better to take care about exchange of glass wool more than pure.
The enclosed description actually had a comment like ... in glass wool exchange briskly, in order to maintain a new article state.
Does it ride? It bears how far and is dependent on a rider.
It is inexpensive if it thinks synthetically.
View detail
Since tone quality and sound volume hardly change to normal although it is the race exclusive parts attached to 91KDX250SR, town riding can also run without using mind. attachment is also easy! the displacement is going up considerably -- it can blow
Since tone quality and sound volume hardly change to normal although it is the race exclusive parts attached to 91KDX250SR, town riding can also run without using mind.
attachment is also easy! the displacement is going up considerably -- it can blow and stage fright is also early.
View detail
Fits: KAWASAKI KLX300R, KAWASAKI KLX250ES, KAWASAKI KLX250SR, KAWASAKI KLX250, KAWASAKI KLX250R (Competition), KAWASAKI KLX300R, KAWASAKI KLX250ES, KAWASAKI KLX250SR, KAWASAKI KLX250, KAWASAKI KLX250R (Competition)
Although he wanted the under guard with an ear and it wavered with ZETA, it purchases here. Although possibly there was also individual specificity, clearance was satisfactory at all. If Gallait and a pea gravel are run, there will be very good so
Although he wanted the under guard with an ear and it wavered with ZETA, it purchases here.
Although possibly there was also individual specificity, clearance was satisfactory at all.
If Gallait and a pea gravel are run, there will be very good sound (smile).
View detail
He bought it mostly at the period with the friend who has taken the same vehicles. He bought alumnus-M1 and the friend bought alumnus-M2. Since it is combination with a normal chamber, sound is quite quiet. pure -- a person with setting about
He bought it mostly at the period with the friend who has taken the same vehicles.
He bought alumnus-M1 and the friend bought alumnus-M2.
Since it is combination with a normal chamber, sound is quite quiet.
pure -- a person with setting about [ much ] night also thinks that he can start the engine, without caring not much by the grade which becomes large more a little (truly some ...).
Although it is probably becoming large by consumption of glass wool ...
I feel that an engine came to turn around whether the omission became good a little well for an effect.
Although it is the difference between OBM-1 and OBM-2, the configuration of (2 being carried out) to whether it is lent and the part by which the buff cliff is carried out is like [ insertion from a screw stop and an inner side ] a difference.
Since it is both a process not much practically equal at the time of glass wool exchange, I feel that it is not a reason of the configuration which OBM-2 tends to exchange.
the engine performance -- almost -- the same -- it seems that you may decide by whether luster luster has good appearance or for it to be common and to be good since a difference is not made so that it is understood.
Incidentally photograph this side is OBM-2 of a friend, and the back is its OBM-1.
The opinion of the appearance of a silencer is different by whether the buff cliff is carried out.
Structure is touch as the thing which only pro skill has and was too made from a pro's hand wonderfully, and very beautiful.
View detail