Reviews
Great grip!
I think the Grip is limited to the Pro grip
It is highly accurate and comfortable in the hand with Gloves
It's not just for long distances
View detail
The fit feeling is very good
Whether the OEMGrip was hardened or originally hard, I changed it to solve the discomfort But I missed the shape of the old TZ Grip and installed it because of the built-in Gel It was
It was not difficult to install, and the Parts cleaner allowed me to insert it firmly, without using Bond It is fixed with the wire lock
The feel of the Grip is more hand-friendly and quite comfortable compared to the OEM cured Grip Touring, etc., even if there is a Gap's thrust, the Shock doesn't hit the hand too directly It is in a one-cushion state and does not cause pain
I feel it's soft, but the Diamond cut fits comfortably and the thickness and feel of the hand are also good It's exquisite, I'm not sure about the durability, but I don't grip it too tightly, so it's quite a bit more like 6 years I think I got it (While some of the cuts are gone.) I think I can use it a little longer, but I feel it's time to replace it
You can also choose to use this type or the Front Tire size and Suspension I changed the setting to be a little soft, so the hard material of the same type I'm considering whether to use the
Anyway, it is easy to feel the operation and road conditions, etc., and the Grip is gentle to the hand It's a recommendation, and the beauty of it is that there is no change in the Grip feeling, regardless of the summer or winter The Gloves are also easy to fit into your hands in any phase, so there is less numbness and fatigue
Because of its softness, the replacement cycle may be quicker, depending on usage
View detail
No fatigue and easy to grip
The OEM Grip from Grom was very stiff and a bit tiring for commuting and touring That's when I found this Grip It looks easy to grip and soft The design isn't bad and the price is inexpensive, so I'm very happy with it! When I tried it on, it was just as I imagined Touring looks easy, too View detail
It's not as durable as it should be
I have been using it for a long time and this time I installed it on my SL
Soft and grippy, but the durability is not so good
You can see quite a bit of use in a year It's not ragged, but..
I just like the Fit feeling when I grip it, so I would replace it if it gets worse
It's a soft Material so it can't be helped, and I enjoy changing the color when I change it out
A little bit cheaper would be great!
View detail
It's much darker than I expected
I bought it 10 years ago to replace my Goggles Lens [Color] I bought Clear, but I bought it to try other colors as well I'm very grateful to the manufacturer for the explanation of the characteristics and visibility of each color It's nice to be able to use it in different conditions It's nice to be able to use it in different conditions I think the price is not too high View detail
It fit Goggles 10 years ago
I bought it to replace my Goggles Lens that I bought 10 years ago. spec I really appreciate the sincerity of the manufacturer Grip Rubber is famous for its pro grip, but Off Goggles are also highly regarded I think you can View detail
Less vibration
Because it is a Honda VTR250 and two cylinders, the vibration of the hand was reduced surprisingly though it trembled a little It's in It may feel sticky in the summer due to its soft texture View detail
Recommendation to Women
The grip is thin Grip, and it was installed on the motorcycle of my wife, who has a small hand
It was Grip of Alcan before, but it is so fine that you can understand it when you grip the Handlebar This increases the sense of security of
The Gel also made it easier for him to go long distances
Slightly more expensive, but the performance is unquestionable
View detail
This is a grip that doesn't make your hands tired and can be used as a dress-up
The unique shape of the Grip requires adequate positioning when installing it, but it's less tiring
It also has a dress-up effect
This is good if you have a hard Grip and your hands get tired from the vibration
View detail
It is in continuous use
Unfortunately, the number of colors to choose from in Model change seems to have decreased
This time, I installed a black monochromatic color and it looks like an OEM spec
I've been using it for a long time because it's gentle on the palm, doesn't get tired easily and is easy to operate
It's not difficult to install, spray lightly with a cleaning agent and use the special groove for Wiring Fixed
Because it is a little soft material, the durability is not up to the level of OEM, but the costumes are also It's good, so it's Recommendation
View detail
It's still good
I used to use it about two years ago I had a bit of a fling with another Grip, but it was wearing out and I bought this Pro grip again It's a good choice I bought the thicker one this time although the last time I thought it was a little thin The inside diameter is not a problem, but the insertion is a little hard because of the thickness However I'm satisfied with the feel of this product, it's easier to grip than ever before, and the colors are good and Large View detail
good
The Grip is always this one
It's soft and may feel a little uncomfortable at first, but you won't mind once you get used to it There are many different types and colors to choose from, so you're sure to find one you like I don't always use the Grip bond because of its high accuracy Even so, I haven't had any problems with them coming off or shifting
If you're unsure, please use Bond properly
View detail
I can't ride long distances without it
Because it's a single-cylinder motorcycle, there is a certain amount of vibration, or if it's an OEM, my hands get numb for an hour It's hard just to ride, but the PROGRIP makes it easy for me to ride for about 3 hours!
I've been using it ever since (Sort of like a late-night shopping experience report on W
However, I think Life is short because it's just soft
I thought it would be a good one to have for a year
Be sure to wear gloves when you install it as it will make your skin crawl if you do it with bare hands
View detail
Commonly usable
Ninja400 (18) Attached to
I could stick it on normally, and even if I failed, I could reapply it twice Recommended for
The adhesive strength is a little weak, but it didn't come off while driving, so I guess it's enough adhesive strength for me
It looks great with Carbon Style and Black Tank
View detail
Unusual shape
When I looked at the photo on the site, I thought it was a taper shape with a thin base, but it is a barrel shape with a lightly narrowed end The price is low for a pro grip As I imagined, it's pretty soft I think it will match the SR and MT-01, which have a lot of vibration I didn't see any ratings "Trial" I bought it at and I recommend it, surprisingly View detail
Length of the hand guard to prevent interference when it is attached
When attaching a Hand guard to a full-length Handlebar, a typical 120mm width With the Grip above, you had to cut it a little bit, but this Grip has a 115mm width and It was perfect with no processing due to its shortness Compared to the #795 with the PROGRIPLogo in it, which I have on the other one, it was 10mm with it on It seems to be close and short The old Honda type (?) for Off cars The Grip force is not a problem because the Pattern is like
I did not use any glue but just fitted it in, but I was able to use ZETA's pearskin Handlebar and It is almost impossible to get a good match with the Throttle tube There doesn't seem to be any (Of course, I think HardYouth requires glue or wire fastening.)
View detail
I'm happy with it, but don't forget to check the size
I was wondering whether to use OEM or DRC because the SL230 OEM was torn, and then I found this The inner tube diameter of SL230 Initial Model is 35mm, so I decided to use Small Select Type
The texture looks good when it arrives
However, when I installed it, the Inner Tube side was Exactly, but the Bore Side was I didn't check the size of the Outer side only on the Inner side I..
There's more than 50mm on the Outer side …
It's not going to fit even if you stretch it out, so you have to make an incision to attach it
Because I stretched it out and put it in, the air release hole stuck to the outer tube and the stroke The ShoeShoe sound comes out every time the W
It took me a while to get my own poka, but I was able to replace it for about half the OEM price, so I'm happy with it
Not related to the item, but it's a bonus? Sticker of the W was in the Large amount
View detail
Ideal for carburetor settings
Initially, I introduced it to make it easier for Touring with a constant Axel opening
Before that, I had to replace the carburetor first, and then I had to do some setting In a strange turn of events, I discovered the beauty of this Grip
in the carburetor's settings, there are three areas of Large It is
Throw region, Needle shape and number of clips, Main region
When you test it on a real car, you can't avoid the inevitable percentages of the Axel opening The task of instantly distinguishing between TESI and STD when using High Solo and this Grip together It's a lot easier and more time-saving than the case of ShapeGrip, in my opinion! It was
Marking to High Solo and Grip, and if the Axel opening is It took Data, bad or good, and squashed that area in the It was a repetition of this process
Compared to the time when we were working with only Fee Rings, we were able to reduce the time to 1/3 Therefore, it is possible to do quite a bit of reconciliation
The gel reduces fatigue and kills two birds with one stone There is
View detail
The vibration was painful, so I bought it
It was installed on a HondaSUPER CUB 88cc Bore up vehicle
As the vibration becomes painful over a long distance, the vibration proof type of I wanted a Grip and looked for a good fit, but it was unknown I ordered it on a bet that it looked sturdy enough for me
Both the installation and driving test were Large success
I liked the vibration and the grip, but I'm worried about its longevity because it's soft
Well, I'm thinking of it as a consumable item
View detail
No more Touring without this already!
After knowing the gripiness of Pro grip on NS-1 it is becoming one of the essential parts.
The vibration transmitted to the hand with or without this is completely different.
It was in a state that my hands were numb in 15 to 30 minutes as long as I can endure even overnight for more than 2 hours w
This time I attached it to YZF - R 125 '13 and made Bar End SSK' s
On the Axel side, it interfered unless you cut the Pro grip a little and installed it.
Well, I just need to do it, so I am not dissatisfied.
It is a matter of compatibility with outside Bar End to the last.
View detail