Reviews
It's still good
I used to use it about two years ago I had a bit of a fling with another Grip, but it was wearing out and I bought this Pro grip again It's a good choice I bought the thicker one this time although the last time I thought it was a little thin The inside diameter is not a problem, but the insertion is a little hard because of the thickness However I'm satisfied with the feel of this product, it's easier to grip than ever before, and the colors are good and Large View detail
The grip is surprisingly normal
Surprisingly normal grip for a quake-resistant Gel
It's just right for sports driving and direct feel, but for Touring Main, it's a good choice
A little bit thicker construction and soft grip might be better
However, the numbness in my hands is lessened after long hours of touring
The seismic Gel is certainly effective
It's a shame I couldn't choose the Green Light that's in the sample photo
View detail
good
The Grip is always this one
It's soft and may feel a little uncomfortable at first, but you won't mind once you get used to it There are many different types and colors to choose from, so you're sure to find one you like I don't always use the Grip bond because of its high accuracy Even so, I haven't had any problems with them coming off or shifting
If you're unsure, please use Bond properly
View detail
I can't ride long distances without it
Because it's a single-cylinder motorcycle, there is a certain amount of vibration, or if it's an OEM, my hands get numb for an hour It's hard just to ride, but the PROGRIP makes it easy for me to ride for about 3 hours!
I've been using it ever since (Sort of like a late-night shopping experience report on W
However, I think Life is short because it's just soft
I thought it would be a good one to have for a year
Be sure to wear gloves when you install it as it will make your skin crawl if you do it with bare hands
View detail
Thin grip
It was a replacement for a used DJEBELX? (probably OEM no replacement) battered Grip Which one is better? I didn't have a clue, but I chose this one for some reason The grip is thin and I like it
View detail
Commonly usable
Ninja400 (18) Attached to
I could stick it on normally, and even if I failed, I could reapply it twice Recommended for
The adhesive strength is a little weak, but it didn't come off while driving, so I guess it's enough adhesive strength for me
It looks great with Carbon Style and Black Tank
View detail
Is it sticky?
I tried to install it using the Bond for the Seismic Grip, but it was hard to get it in, and I struggled with it I got sticky with Bond while I was doing it I applied Bond to the one I was going to put on and sprayed a large amount of Parts cleaner into the Grip When I installed it from the top, it was easy to install Even after installing it, if you touch it with an army hand or a rag, the fibers will be covered with threads from Grip and hellip; It is very comfortable to use while driving View detail
Installation [Color] If it's clear, it's a great deal of fun!
I bought it as a trial before I bought PhotoBlackMickShield
Double-sided tape is used for installation, but it can't be reattached as it seems (Where should I stretch it based on Pin lock?) You have to be very careful before applying the sealant After stretching, you need to keep holding the Seal material until it is fixed
Anti-glare performance is as good as PhotoBlackMickShield [Color] It doesn't take smoke, but I think it's enough (But I haven't used it in the summer, so I need to test it in the summer.) The Anti-Fog performance is also adequate
I think (that) [Color] Thanks to the modest amount of smoke, even if you only reupholster the interior, it doesn't look like it's been changed that much I wondered if it was okay
In general, I think that it is enough user-friendly Items, except that you have to be careful about the sticking The price of PhotoBlackMickShield has gone up;
View detail
Unusual shape
When I looked at the photo on the site, I thought it was a taper shape with a thin base, but it is a barrel shape with a lightly narrowed end The price is low for a pro grip As I imagined, it's pretty soft I think it will match the SR and MT-01, which have a lot of vibration I didn't see any ratings "Trial" I bought it at and I recommend it, surprisingly View detail
I was disappointed to get it out of Case!
The seal on the case hides a part of the tank pad, so you need to take it out to see if you can find it There wasn't; parts of the Tank Pad were not thick and were just Seal! You'd better see for yourself when you buy this Manufacturer's product! View detail
I was disappointed to get it out of Case!
Because the seal on the case hid a part of the product, I didn't understand it unless I took it out Part of the Cushion of Tank Pad was missing and it was just a seal View detail
Length of the hand guard to prevent interference when it is attached
When attaching a Hand guard to a full-length Handlebar, a typical 120mm width With the Grip above, you had to cut it a little bit, but this Grip has a 115mm width and It was perfect with no processing due to its shortness Compared to the #795 with the PROGRIPLogo in it, which I have on the other one, it was 10mm with it on It seems to be close and short The old Honda type (?) for Off cars The Grip force is not a problem because the Pattern is like
I did not use any glue but just fitted it in, but I was able to use ZETA's pearskin Handlebar and It is almost impossible to get a good match with the Throttle tube There doesn't seem to be any (Of course, I think HardYouth requires glue or wire fastening.)
View detail
I'm happy with it, but don't forget to check the size
I was wondering whether to use OEM or DRC because the SL230 OEM was torn, and then I found this The inner tube diameter of SL230 Initial Model is 35mm, so I decided to use Small Select Type
The texture looks good when it arrives
However, when I installed it, the Inner Tube side was Exactly, but the Bore Side was I didn't check the size of the Outer side only on the Inner side I..
There's more than 50mm on the Outer side …
It's not going to fit even if you stretch it out, so you have to make an incision to attach it
Because I stretched it out and put it in, the air release hole stuck to the outer tube and the stroke The ShoeShoe sound comes out every time the W
It took me a while to get my own poka, but I was able to replace it for about half the OEM price, so I'm happy with it
Not related to the item, but it's a bonus? Sticker of the W was in the Large amount
View detail
Ideal for carburetor settings
Initially, I introduced it to make it easier for Touring with a constant Axel opening
Before that, I had to replace the carburetor first, and then I had to do some setting In a strange turn of events, I discovered the beauty of this Grip
in the carburetor's settings, there are three areas of Large It is
Throw region, Needle shape and number of clips, Main region
When you test it on a real car, you can't avoid the inevitable percentages of the Axel opening The task of instantly distinguishing between TESI and STD when using High Solo and this Grip together It's a lot easier and more time-saving than the case of ShapeGrip, in my opinion! It was
Marking to High Solo and Grip, and if the Axel opening is It took Data, bad or good, and squashed that area in the It was a repetition of this process
Compared to the time when we were working with only Fee Rings, we were able to reduce the time to 1/3 Therefore, it is possible to do quite a bit of reconciliation
The gel reduces fatigue and kills two birds with one stone There is
View detail
The vibration was painful, so I bought it
It was installed on a HondaSUPER CUB 88cc Bore up vehicle
As the vibration becomes painful over a long distance, the vibration proof type of I wanted a Grip and looked for a good fit, but it was unknown I ordered it on a bet that it looked sturdy enough for me
Both the installation and driving test were Large success
I liked the vibration and the grip, but I'm worried about its longevity because it's soft
Well, I'm thinking of it as a consumable item
View detail
Vibration reduction effect is as expected
It was attached to CB 125 R. With an OEM, if you run as much as 20 Km, you have numbness of your hands, but after replacement you will not say at all, but no numbness will remain. I did Big Rig with more effect than I thought.
However, I think that it will be about 3 long as it is attached to CB 125 R. Moreover, the nature of Rubber is also soft, and I am worried about durability.
View detail
I tried to install it and it was torn and it was useless.
It broke at the time of putting in the round part of Lever's tip.
Parkari I do not slip at all even if I buy it.
Grip is Pro Grip of Large justice
Lever grip is ...
As a result it has been split without terminating it.
View detail
No more Touring without this already!
After knowing the gripiness of Pro grip on NS-1 it is becoming one of the essential parts.
The vibration transmitted to the hand with or without this is completely different.
It was in a state that my hands were numb in 15 to 30 minutes as long as I can endure even overnight for more than 2 hours w
This time I attached it to YZF - R 125 '13 and made Bar End SSK' s
On the Axel side, it interfered unless you cut the Pro grip a little and installed it.
Well, I just need to do it, so I am not dissatisfied.
It is a matter of compatibility with outside Bar End to the last.
View detail
sold out…
To the successive vehicles, made by Pro grip, Superbike Grip, Black / Color : I am using Yellow
I am the best match, so I never used any other products
I will not grasp the Grip with bare hands, so it will be a feeling when I added Gloves
I got the installation as a single car purchase store
I use it for ESTRELLAFinal
View detail
It is delicately expensive
With earthquake-resistant Gel, I feel soft when I grasp it
Although there is no vibration at all
It is a feeling that I feel relieved rather than an ordinary thing?
It will be saved if the price is cheaper a little more.
View detail