Reviews
To prevent scratches on Tank
I bought this to prevent scratches to the Tank as it is SS.
It is not limited to this product, but it is rather difficult to make sure that the center is exactly in the center when applying.
The adhesion is neither too strong nor too weak, and I think there is a good balance between strength that does not seem to peel off on its own and weakness that does not damage the paint when peeling it off.
The size is a little larger than the cheap ones from other companies, and the cover range is wider. The texture is glossy and gives a sense of high quality, but the durability against sunlight is yet to be seen.
View detail
It is good to be normal.
Second purchase for my wife's Motorcycle.
[How is it used?
Strip off the Chinese one and replace it with this one.
Was the one you received as per Image?
Yes
Was the installation difficult?
I applied it with one shot, not with water, but I couldn't apply it straight and had to reapply it.
How was your experience with it?
A few days, but no floating or peeling.
Mine, which I put up before, is currently fine.
[Included Parts:were they on?
nothing special
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
If the backing paper is divided into two parts, it may be easier to paste it as it is.
View detail
Is good
Pasted on MT-25, SeatLimit from MTMark, so I removed Seat and pasted it.
I was worried about the green color of the other site's comments, but I am satisfied that it does not look greenish.
I have stuck a Chinese one from a certain jungle, but the adhesive strength is unmatched, and with proper degreasing, so far it is firmly attached to the edges.
I didn't know where to put the small ones, so I put them on my knees.
View detail
Like this
Neither good nor bad
This is how it feels.
View detail
It's neither good nor bad
Well, a common and ordinary Tank Pad.
I was wondering if it was a pachimon? I was not sure about the quality of the product, but I decided to go with this one because it seems to be of delicate quality.
I don't have anything special to say about it, but it seems to be durable.
View detail
Even my muddy butt in Muddy won't slip!
Normal seat of CRF125F is suitable for muddy driving such as Enduro.
I was concerned that it would slip easily.
I consulted with a friend who rides the same type of car, and immediately this Seat cover
He told me about it, so I bought it and installed it.
Grip has been outstanding, and Large was right to reupholster it!
It is very comfortable to use, even with my butt covered in mud during the Muddy Race.
Riding is easy.
If you want, there should be a color range that matches the body color and the manufacturer color.
I thought it was good.
View detail
It's definitely easier to ride than OEM.
[How is it used?
I used this seat on my CRF250RX, and although I was not dissatisfied with the large OEM seat, I felt that the bike was moving forward when I rode up Woods and I felt that my body was being left behind. I had changed from a normal seat to a high grip seat on my SEROW and it was much easier, so I bought this seat in the hope that it would make riding easier this time. In addition, I also removed the bean paste.
Was the one you received as per Image?
It was much more spacious than I had imagined.
Was the installation difficult?
I once reupholstered a SEROW with a dubious High gripSeat that I purchased in a jungle for about $2000. I remember that it was rather difficult. Compared to that, this was much easier. It stretches well.
If I may say so, the length is a little too long, and the logo of PROGRIP went to the back of the Seat, and I had to cut it off in tears. For foreign cars?
How was your experience with it?
Not at all. They eat a lot.
When sitting, my body is no longer left behind. And not only during sitting, but also in standing posture, I can feel that I am holding the body not only by my ankles but also by my inner thighs.
Up and down Quantity:Pair (for Left and Right) This snagging may be a concern for Motocross and other busy motors that are moving from one place to another.
[Included Parts:were they on?
This product only.
[Was there anything that disappointed you?
The performance is totally satisfactory.
I repaired it with Stapler and Bond, but I was a little disappointed.
Other items that would be helpful
Installation Point or hang
→ When reupholstering, it would be a good idea to cover the Seat's Urethane with a Vinyl bag to prevent water from getting in if this gets torn in the future.
View detail
Grip strength is unmistakable.
I chose this one to change the upholstery of the Spiral footpegSeat for the WR250X.
The SIDE area is quite limitless, but I was able to reupholster it if I was willing to die to pull it.
Of course, I chose the Supper Grip because I use it for the road race. I couldn't grip the suit well because it was too smooth, but after I reupholstered it, it is very firm. Grip.
I don't think there's a Seat to grip any more - Recommendation.
View detail
Size and Design are perfect The hittiness is good
Well, I think the price can be kept down a bit more, right? I think Isn't that why fake products are available at low prices? And Basically, RiderGoods is expensive or.. (Sweat)
View detail
It's an itchy, itchy, tank scratch prevention
Fastener hits the Tank, so a Tank Pad is a must
There are a lot of taller ones for the CBR250RR, but none of them have a shape that can be protected I arrived at this product
The design is simple and perfect with this product to protect it from the trunk to the front of the seat It is
But depending on how you apply it, it can be a little difficult to apply the tight parts of the R's
View detail
Easy to stick straight type
Although I had purchased KawasakiOEM's straight Rim tape before, I could not stick it well, and Rim tape was using the curve type of Large body quadrant.
However, thanks to the affixing jig attached to this product, it is a straight type, but it was able to stick cleanly without bending.
View detail
Since other Motorcycles are equipped with the Wheel tape, it is made to make it the purchased Motorcycle.Since neither decoloring nor the peeling can see a function on other Motorcycles which left for three years, it is satisfactory.However, I think wheth
Since other Motorcycles are equipped with the Wheel tape, it is made to make it the purchased Motorcycle.Since neither decoloring nor the peeling can see a function on other Motorcycles which left for three years, it is satisfactory.However, I think whether since a Tape may go out if it tries to stick at cold time, recommendation sticks at warm time.
If it can do with it, I will want you to make the kind of color more.
View detail
Although stuck on NC700X, the die length of the Tape was a Limit.Since it is easy to go out on a soft Tape to except, cautions are required.It is as serious as being involved.Moreover, if the direction (Tire direction of rotation) to stick is different, i
Although stuck on NC700X, the die length of the Tape was a Limit.Since it is easy to go out on a soft Tape to except, cautions are required.It is as serious as being involved.Moreover, if the direction (Tire direction of rotation) to stick is different, it will fail.Since there was no concrete explanation of a way to stick, it was serious.If it presses down and sticks, moving little by little, it will be finished finely.
It stuck and was necessity about 45 minutes from the start to termination.Let's stick a hole after degreasing.It is a Tape of a one-shot deal.
View detail
It purchases to a Dress-up [ up ] underfoot. Since it was awkward, the exclusive attachment Gauge was purchased separately and it challenged. However, it bent in any way, and it stuck well and was not able to do. Moreover, another color is purchas
It purchases to a Dress-up [ up ] underfoot.
Since it was awkward, the exclusive attachment Gauge was purchased separately and it challenged.
However, it bent in any way, and it stuck well and was not able to do.
Moreover, another color is purchased and it challenges. --
View detail
It attached for a petit Dress-up up and crack prevention. texture -- the intestines -- since it is thick, and a crack is not attached, either, if it is this, I think that it is good. A Cost performance is good although it is only what removes and sticks
It attached for a petit Dress-up up and crack prevention. texture -- the intestines -- since it is thick, and a crack is not attached, either, if it is this, I think that it is good. A Cost performance is good although it is only what removes and sticks a Seal. About a handle, it is liking. View detail
I referred to the impression of others, I thought the start and the end of stick. A position with an amusing angle which beginning sticks after sticking a part will be cut about 2 cm. It sticks 1 round then, sticks on an excess about 3 cm, and cuts roughl
I referred to the impression of others, I thought the start and the end of stick. A position with an amusing angle which beginning sticks after sticking a part will be cut about 2 cm. It sticks 1 round then, sticks on an excess about 3 cm, and cuts roughly. The overlapping position is lessened as much as possible, and it cut for adjustment. It was third or forth time to do well. Two front tires had remained patch, but it is ok not seen from near! The appearance is good! If I don't like, it is ok to re-stick and it was easy than I thought. View detail
I stuck instantly!! It is cool.
I stuck instantly!! It is cool. View detail
The thing with a cheap price was pleasing and purchased. Since it is large, a crack is prevented firmly. Since it will float if the adhesion of an angle of resticking is lost or it is turned at and stuck, it may merely grow into some and the quali
The thing with a cheap price was pleasing and purchased.
Since it is large, a crack is prevented firmly.
Since it will float if the adhesion of an angle of resticking is lost or it is turned at and stuck, it may merely grow into some and the quality of a nerve.
Since it will grow into a big accent and a crack will also be suppressed if it can stick, it is satisfactory.
View detail
A wheel paint is a recommend in the direction ..., slightly in cost. The impression of a motorcycle changes. Although it is also in other Ho's impression, it is difficult to stick. I think that it can stick comparatively well if it sticks divi
A wheel paint is a recommend in the direction ..., slightly in cost.
The impression of a motorcycle changes.
Although it is also in other Ho's impression, it is difficult to stick.
I think that it can stick comparatively well if it sticks dividing into several times.
In addition, since it may become less insufficient if it fails since it is a quantity like 4 rounds in 18 inch wheels, cautions are required.
View detail
Usage was not found well but stuck after all the components which guide an attached tape by its intuition. Since it is extended well, along with the rim of a tire, it can stick round. After sticking, it ran several times, but without separating es
Usage was not found well but stuck after all the components which guide an attached tape by its intuition.
Since it is extended well, along with the rim of a tire, it can stick round.
After sticking, it ran several times, but without separating especially, he had a feeling which also changed the impression of the motorcycle and it became a cheap and simple and convenient dress-up up.
View detail