Reviews
Vibration less and easy to grasp
It is a replacement from NORMAL.
Grip that absorbs vibration as much as possible
I looked for this.
After the exchange, the feel of the hand grip is also good, the vibration is also NORMAL
It seems that it absorbs more than Grip.
View detail
To dTRACKERx
I installed it in dTRACKERx. Is the feeling gripped slightly soft?. I think that there are fun to choose according to the car body because I think that there are also color variations. I am saved because the price is affordable. View detail
Is good
Although the price is cheap, making it with the product of Pro grip is quite good.
There is also a groove for Wiring so it is easy to wire and the surface is not slippery.
And I liked it with moderate softness.
It is a grip of Balance.
View detail
Purchased purchased by Design and Color
Rubber quality is soft, I think that the feeling of Grip is quite good.
I will be worried about durability afterwards, but if it is a cono price somewhat I think that even if Life is short it is enough to allow it.
Afterwards is my responsibility, green light stands out dirty without hesitation (Lol)
View detail
Rolling comfort
SEROW225WE (5MP1) I attached it to the 2000 year ceremony.
Easy to install.
Pachiri puffing removal inside the old Grip inside as usual. Clutch side with a little adhesive, Axel side without gluing OK
Easy as UP direction is attached to GripRib
Comfortable handling!
Because it is a consumable item, Cospa & good quality items will be Repeat.
View detail
It is inexpensive and long lasting
Currently installed on the vehicle. It is slightly softer compared with OEM, so the color is Light gray so dirt stands out. It is recommended for price. Although it was installed in summer, Bond did not solidify due to thickness but it twisted during use, but it solidified and fixed in winter. View detail
PROGRIPPro grip:#793
PROGRIPPro grip : 68639 for Off-RoadGrip # 793 CUB installed, quality, product precision
Large I'm strange. I am looking forward to seeing how durable the Rubber is..
View detail
Vibration reduction!
- - - You probably are..
I think that it feels like I feel better than OEM's Grip.
When I come back home with a forest road nearly half a full day, I still have numbness in my hands.
I like the feeling of grasping, the feeling of Grip, the color taste.
Moreover, although it is running about 1,500 km after installation, there is no inconvenience for now.
About the degree of vibration reduction, there is a feeling that I expected too much before purchasing.
View detail
I will not slip..
Because Grip is released from various manufacturers, I think that there is a preference, but this Grip is soft, the irregularities are large, it is difficult to slip, there is a difference in level of unevenness with the one in front of the back of the hand and the one at the fingertip , I think that it is very easy to use.
I definitely recommend it..
View detail
Attached to Road motorcycle
Offfor Vehicle's Grip, but I tried installing it on the SRX 400.
Because the Grip width of the SRX 400 is 115 mm because there is not much choice if it is MODEL for Road. So the collar is a wide Offfor Vehicle, but I tried wearing it to feel the earthquake-resistant Gel of PRPGRIP.
As a result, the operation feeling is solid and it is the best without slipping. However, this MODEL seems to be a slim MODEL with Solid which Gel is not soft so much among PROGRIP products, I thought that the point was chosen by Design and failed.
Of course there is Gel feeling. I just wanted a bit more, so I think I will try God's soft MODEL from the company next time.
Incidentally, this product has a groove for Wiring, I fix it with only Wiring without using Grip bond, but I do not particularly slip. When installing, we brought Silicon spray to the Handlebar and then attached it through.
View detail
The color is also GOOD
I chose a color close to WR's Yamaha blue. It is a beautiful color although it is purple slightly.
Fit feeling is good and Pro grip is using much more than the past. Balance of price and quality is not the best?
There is only one Wire groove so if you were a Grip for Off you want 2 or 3 places.
View detail
It is Repeat.
I purchased it at the same # 790 reserve.
The picture is in a state of 5000 kg usage for 1 year, but in fact it is likely to be used still more.
I also thought about Pro Grip using other Gel, but because I am not good at being flashy, I chose # 790 as a result of choosing the most chic.
It will take a while for the turn to come, but if it becomes useless it will be replaced.
View detail
Classic
I bought it for Offfor Vehicle. In fact, OffRod Grip of Weim BigMODE was good, but it was also Sale because it was undecided in stock so we made this product of the standard product Pro grip. Small grain Flat on the top and Waffle on the bottom. Race does not like it, but it is easy to use because it does not slip appropriately in normal conditions, in the forest road degree, this shape does not slip appropriately.
View detail
Purchased with Handlebar exchange
Exchange at the same time as Handlebar exchange. Vibration absorption GEL as for Off-Road? Fairly soft. I am concerned about durability, but it seems to be effective for numbness caused by vibration. View detail
It is slightly longer.. (Axel side)
I write it in Title but it is a bit long.
You can see the image, Right Side (Axel side) Grip is in a Taper shape towards Bar End. This part is not in contact with the Throttle tube.
Because it is such a state, if you use it together with Hand End of Bar End or Close Type, you may be a little worried about the installation. It would be good to remove the part protruding from the Throttle tube, but prioritize the apparent part and not cut it well, put the Color of moderate diameter etc etc etc etc etc etc etc etc. It corresponds with.
The models we installed are SEROW 250 and XR 230, but both have replaced Throttle tube with those of ZETA's Teflon. Perhaps it is OEM, it may not be such a state, but it is not bad.
As a two-layer Grip, it is excellent in COSPA, it is surely soft when touching with bare hands, it is certainly soft, if you try Gloves and operate it, it is not more touched with bare hands, but softness (Or rather elastic? I feel.
View detail
It is harder than other PROGRIP
In the past, I used Superbike Grip # 724,
Image of Soft Grip
Although it feels soft with the degree that it can change to Grip
Obviously it is different from other PROGRIP products because there is a hard layer as soon as it grips
It also has grooves for Wiring, which is a high Grip among the company's products, but I think it is a well-made product
View detail
Fits: SUZUKI Universal, SUZUKI Universal
It seems that it becomes thicker pure, and vibration is also absorbed since a gripping feeling is also good and has a part of elasticity.Originally [ ], although it was a penetrated type, the un-penetrating type whose discount rate was expensive and w
It seems that it becomes thicker pure, and vibration is also absorbed since a gripping feeling is also good and has a part of elasticity.Originally [
], although it was a penetrated type, the un-penetrating type whose discount rate was expensive and was cheap was purchased at the Sale, and the after-insertion end was hollowed by the Cutter and has been attached satisfactorily.Since the Throttle side had spittle in both SIDEs, although it needed to shave off, even if it attached as it is, the crevice opened a few like the photograph, but there was no problem on use.Since it becomes fairly comfortable by
petit Maintenance, it is recommended.
View detail
pure -- more -- being cheap (a price cut) -- it seems that quality is equivalent or the above. Goods which it can enough recommend.Grip form is near pure.The Pro grip is a Manufacturer which can trust it.
pure -- more -- being cheap (a price cut) -- it seems that quality is equivalent or the above.
Goods which it can enough recommend.
Grip form is near pure.The
Pro grip is a Manufacturer which can trust it.
View detail
Since the palm was becoming painful when about 300 km ran, since it was a thin Grip, the Grip which was being used before exchanges for a Gel type thing as if it can ease.Since it being easy to become dirty for a while although it is softly preeminent als
Since the palm was becoming painful when about 300 km ran, since it was a thin Grip, the Grip which was being used before exchanges for a Gel type thing as if it can ease.Since it being easy to become dirty for a while although it is softly preeminent also for a grip feeling, and this Type of durability ran 250 km the other day although it became mind what kind of thing it is, and the pain of the palm was eased considerably, the original purpose attained. View detail
It purchased to a time and HUSQVARNAs and used it for one year. The using feeling was good and newly purchased as an object for SEROW225s, such as being hard to slide also on mitigation of the vibration from a Handle, or some mud. Although there was sam
It purchased to a time and HUSQVARNAs and used it for one year.
The using feeling was good and newly purchased as an object for SEROW225s, such as being hard to slide also on mitigation of the vibration from a Handle, or some mud.
Although there was same Grip also in
other company, since he wanted black, PROGRIP was decided on.
(PROGRIP in passing --) [ Goggles ]
View detail