Reviews
Fits: SUZUKI GSR250, SUZUKI GSR400, SUZUKI GSX1400, SUZUKI GLADIUS650400, SUZUKI GSX-S1000F, SUZUKI SV650, SUZUKI V-STROAM250, SUZUKI BURGMAN400, SUZUKI V-STROAM, SUZUKI GSX-S1000S, SUZUKI GSX-S1000, SUZUKI GSX250R, SUZUKI GSX-S1000GT, SUZUKI V-STROAM1050, SUZUKI V-STROAM1050XT, SUZUKI V-STROAM1050DE, SUZUKI V-STROAM650, SUZUKI V-STROAM650XT
First time is tough.
If you are replacing the Bar End for the first time, be careful.
I guess it depends on the type of car, but in my case (2023 KATANA),
First, the Bolt that is included will not be used. Also, most of the included parts will not be used.
I use the OEM Bolt, but sadly it does not fit this Bar End.
I think it is a lack of understanding of the structure of the Bar End itself, but at first I used a part like the Adjuster that came with the Bar End without understanding it, and the Bar End did not come off.
We ended up taking it to a Motorcycle shop and decided to remove this Bar End.
Since the product photo does not show the attached parts, I will buy the actual product at the Shop in the future, even if it is a little more expensive, instead of using Webig.
View detail
Bolt is becoming White muddy.
The bolt has turned cloudy white. How many years ago was the bolt manufactured? I purchased the Titanium at the same time as the POSH shaft, but this product is a Blackish Titanium and does not match the shaft. View detail
Bolt is becoming White muddy.
It looks better now. I have another Large Motorcycle, and I am thinking about installing it. View detail
tw200
[How is it used?
Touring
Was the one you received as per Image?
YES
Was the installation difficult?
Easy
How was your experience with it?
Very good
[Included Parts:were they on?
It was attached.
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: KAWASAKI ZRX1200S, KAWASAKI ZRX1100, HONDA CB400SF, HONDA CB1300 SF, YAMAHA XJR1200, YAMAHA XJR1300, YAMAHA XJR400, KAWASAKI ZRX1200R, KAWASAKI ZrX1200ZrX1200 DAEG
I think it's good for a little dress-up!
I am satisfied with the quality of the product.
I think it is good for dress-up around handlebar.
View detail
I wanted Black!
This is great! It's a bit of an accent. View detail
ETC Antenna BracketTYPE 3
Can be installed by co-tightening with Mirror Bracket.
Installation should be completed in 15 minutes.
The product is not very thick, so you can slightly adjust the direction of the ETCAntennas etc. by hand.
View detail
Posh faceNarrow up bar
I don't know. I haven't ridden it yet. View detail
Material:Material on the Caliper side of Aluminum:Banjo bolt in Aluminum.
Since the caliper side is aluminum, we replaced the OEM steel banjo bolt with an aluminum banjo bolt to prevent thread galling due to electrical corrosion when replacing the brake hose.
Since it is GOODRIDGE compatible, OEM's NORMAL could be used, but replaced with this product for the above reasons.
Since it is a product of a proper manufacturer, there are no problems with thread accuracy, quality of anodized processing, etc., and it can be used with confidence.
View detail
Vibration reduced?
I have not had any vibration from the OEM, so I can't compare, but I can say that the Smartphone Holder and SMARTDisplay are not affected. View detail
Price is Neck
Used to replace a sprocket on a first generation Ninja 250R.
Since we are replacing it with a beautiful black painted Sprocket
Lock nut also chose this product to provide a unified look.
It is hard to find a Nut that is Black in color and fits the diameter & Pitch.
I've checked Monotaro and other places, and they sell Black Nut, but the Pitch doesn't fit.
It can't be used because the diameter doesn't fit or something.
Therefore, we concluded that we can only use this product in effect, although it is a little expensive.
View detail
tw200
[How is it used?
Touring
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy with special tools
How was your experience with it?
Large strange
[Included Parts:were they on?
RClip
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: KAWASAKI GPZ1100, KAWASAKI GPZ900R, KAWASAKI NINJA250R, KAWASAKI NINJA400R, KAWASAKI NINJA650, KAWASAKI NINJA650R, KAWASAKI Z750, KAWASAKI Z750S, KAWASAKI Z800, KAWASAKI ZEPHYR1100, KAWASAKI ZRX1100, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZX-7R, KAWASAKI ZX-9R, KAWASAKI ZX14R, KAWASAKI ZZR1100, KAWASAKI ZZR1200, KAWASAKI ZZR1400
There is an effect that can be seen in the "Hadrill
Vibrations at highway speeds are noticeably reduced, at 80km I don't feel it at all, at 90km it's just a little bit bothersome. Motorcycle is the New Model Eliminator. View detail
Used with Continental handle
I bought a Chromeplating type.
Short Type is suitable for going through narrow places. I have a Continental handle and the rearward visibility is good for a Short Type. I think the blurring that everyone is concerned about is at a practical level even at high speeds.
I've driven about 200 km, mostly down the road, and it was comfortable.
I don't know yet if it is resistant or weak to Rust. I think this kind of plating mirror needs to be cleaned frequently because it rusts easily if left unattended.
View detail
Fits: KTM RC250, KTM RC390, KTM DUKE250, KTM DUKE390, YAMAHA MT-25, YAMAHA MT-03, YAMAHA NMAX, YAMAHA YZF-R3, YAMAHA YZF-R25
Effective in vibration reduction
It is a Single Body and quite heavy. It is certainly effective in reducing vibration. View detail
For a slight change in position
[How is it used?
To improve posture
Was the one you received as per Image?
Well, it's Handlebar.
Image
Was the installation difficult?
It has already been drilled for switches and other devices,
If you have experience in Oil replacement, I think you can pimp it out.
How was your experience with it?
It fit my physique.
[Was there anything that disappointed you?
Cable replacement is unnecessary. but I have the impression that it is quite tight and there is no room.
I think you would need to change the handling if necessary,
It may not be easy with W wiring.
View detail
It gives a nice Retro feel.
It was inexpensive, easy to install, and gave a nice Retro feel.
I wonder if old Motorcycles had them.
There was just a little left over after one round of Fuel Tank.
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SB
I'm glad I bought it!
I wasn't sure whether to buy it, but, I'm glad I did! ♪ (??????) ♪ View detail
rebel 1100 dct
It's perfect for the Rebel 1100 handlebar. It was installed well and tuning was smooth. The delivery and process were perfect. However, it's not for the Honda Rebel 1100 only.
It's a pity that the part needs to be processed.
It's perfect for the Rebel 1100 handlebar. It was installed well and tuning was smooth. The delivery and process were perfect. However, it's not for the Honda Rebel 1100 only.
It's a pity that the part needs to be processed ------------------------------------------ ---------------- It's perfect for the Rebel 1100 handlebar. It was installed well and tuning was smooth. The delivery and process were perfect. However, it's not for the Honda Rebel 1100 only. It's a pity that the part needs to be processed. It's perfect for the Rebel 1100 handlebar. It was installed well and tuning was smooth. The delivery and process were perfect. However, it's not for the Honda Rebel 1100 only. It's a pity that the part needs to be processed. Powered by Google Translator
View detail
Beautiful lights
The lights feel and look beautiful and visibility is improved!
As for the price, I personally think it would have been easier to afford if it were a little cheaper.
View detail