Reviews
Bolt is becoming White muddy.
The bolt has turned cloudy white. How many years ago was the bolt manufactured? I purchased the Titanium at the same time as the POSH shaft, but this product is a Blackish Titanium and does not match the shaft. View detail
Vibration reduced?
I have not had any vibration from the OEM, so I can't compare, but I can say that the Smartphone Holder and SMARTDisplay are not affected. View detail
Price is Neck
Used to replace a sprocket on a first generation Ninja 250R.
Since we are replacing it with a beautiful black painted Sprocket
Lock nut also chose this product to provide a unified look.
It is hard to find a Nut that is Black in color and fits the diameter & Pitch.
I've checked Monotaro and other places, and they sell Black Nut, but the Pitch doesn't fit.
It can't be used because the diameter doesn't fit or something.
Therefore, we concluded that we can only use this product in effect, although it is a little expensive.
View detail
For a slight change in position
[How is it used?
To improve posture
Was the one you received as per Image?
Well, it's Handlebar.
Image
Was the installation difficult?
It has already been drilled for switches and other devices,
If you have experience in Oil replacement, I think you can pimp it out.
How was your experience with it?
It fit my physique.
[Was there anything that disappointed you?
Cable replacement is unnecessary. but I have the impression that it is quite tight and there is no room.
I think you would need to change the handling if necessary,
It may not be easy with W wiring.
View detail
The price is ….
It looks cool, but as with all RS parts, the price is too high! View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Tandem seatBelt cover
I chose gold for the Seat cover because I have a uniform color of gold. I like the texture and the high quality feel of the cover. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Choose a different Type
I was thinking that most of the Blinkers were Round Type and not face White, but then I found this one and bought it.
I found out later that the OEM went to the trouble of using bulbs even though they are LEDs.
So I bought LED Bulb from Mercari and Relay for LED. (OEM was not allowed to do this)
It was something that cost me an extra Gold.
View detail
Washer diameter is Small
I used a 25mm Spacer to adjust the angle of the windshield on my CRF250RLY50, so I used this washer when I changed the fixed bolt.
The OEMScreen Fixing Bolt has a 13mm diameter UrethaneWasher and the color is Black, so I purchased this BlackWasher, but the diameter is too small, so I am not sure why. Even if the color is different, I would rather purchase a regular Stainless SteelWasher to protect the UrethaneWasher, because I can choose various sizes.
However, this BlackWasher itself is a very good quality product.
View detail
Black stainless
When replacing the disc with a new one, the lock nut for fixing was replaced with this Stainless black one.
It is a little pricey in terms of the number of units used, but I am satisfied with the appearance because it is rust-resistant Stainless Steel and Black, which makes it look beautiful.
View detail
Reliable Brand
The blinker has not been replaced yet, so I will not be able to check the operation until it is installed. View detail
Fits: SUZUKI GSR250, SUZUKI GSR400, SUZUKI GSX1400, SUZUKI GLADIUS650400, SUZUKI GSX-S1000F, SUZUKI SV650, SUZUKI V-STROAM250, SUZUKI V-STROAM650XT, SUZUKI V-STROAM650, SUZUKI V-STROAM1050DE, SUZUKI V-STROAM1050XT, SUZUKI V-STROAM1050, SUZUKI GSX-S1000GT, SUZUKI GSX250R, SUZUKI BURGMAN400, SUZUKI V-STROAM, SUZUKI GSX-S1000S, SUZUKI GSX-S1000
Buy ja59
I wanted to install a low thickness bar end on my ja59, so after removing the OEM bar end, I tried to install it, but it was not possible.
I think I can install it by cutting and shortening the bar end fixing part, but I think I will save it for another motorcycle this time.
I learned a lot, I couldn't install it, but the design is good and I am satisfied with the product!
View detail
![[Bar End Repair Parts] Flat Washer](https://img.webike-cdn.net/catalogue/images/22383/031076-72_01_TS.jpg)
Small ObjectsParts
These parts are useful if you keep them in your parts box. View detail
Importance of imple
[How is it used?
It is installed on a jc61 grom OEMHandlebar.
Dress-up and Suma Holderetc. installation purpose.
Was the one you received as per Image?
I love it so much that I Repeat it.
Was the installation difficult?
It was about 10 minutes.
How was your experience with it?
I am not sure if it is because I could not install it in the correct position this time, but it feels a little more jittery in my hand than before.
[Was there anything that disappointed you?
I made the mistake of buying it because all the impressions I saw said that 187mm was JUST the best for Groms, etc.
The jc61 is not 187mm and is more expensive, but the length adjustable Type is better.
With proper installation, the way Clamp fits is obvious.
I don't think it makes sense unless the face of the Clamp and the face of the Handlebar are Exactly aligned.
I will consult with Wallet and replace it with Posh's adjustable Type.
View detail
Fits: HONDA CBR600RR, HONDA CB400 SUPER BOL D'OR, HONDA CB1300 Super Four, HONDA CB1300 SUPER BOL D'OR, HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR
It did not work for crf250rally.
Purchased when replacing crf250rallyBlinker.
However, it did not fit the Front Blinker….
The fit is this way.
POSH Blinker Conversion Coupler Code Hondafor Front (18-19CB1300SF/SF-SP)
View detail
Fits: HONDA CB1300ST, HONDA CB1300SB-SP, HONDA CB1300SF, HONDA CB1300SB, HONDA CB1300SF-SP
Purchased for protection in the event of a fall
I bought it in case of emergency.
However, the product I received was scratched and the plating was peeling, so I contacted the manufacturer directly to have it replaced.
I ended up removing it because I was worried that I would not be able to remove the Crankcase Bolt in the event of a fall.
View detail
Fits: HONDA MSX125 (GROM), HONDA MSX125 (GROM)
If Black.
I tried to find other products but there is no Black anyway.
I had no choice but to choose Gold, but Black would have been better.
Cut-out texture is nice and well made.
View detail
Fits: SUZUKI GSR250, SUZUKI GSR400, SUZUKI GSX1400, SUZUKI GLADIUS650400, SUZUKI GSX-S1000F, SUZUKI SV650, SUZUKI V-STROAM250, SUZUKI V-STROAM650XT, SUZUKI V-STROAM650, SUZUKI GSX-S1000GT, SUZUKI V-STROAM1050DE, SUZUKI V-STROAM1050XT, SUZUKI V-STROAM1050, SUZUKI GSX250R, SUZUKI BURGMAN400, SUZUKI GSX-S1000S, SUZUKI V-STROAM, SUZUKI GSX-S1000
I'll think about it a lot.
This is the first time I have installed an UltraHeavy weight Bar End.
I thought the heavier weight would reduce vibration….
I have only ridden it a little bit, but it doesn't seem to vibrate.
I don't know how it will look when I get on the highway, but I wonder if it will be Large sturdy?
However, since it is heavy and large, it is thicker than the Handlebar, and I feel uncomfortable when driving it where it is different from the Handlebar.
The handlebar has been replaced with a handlebar that is up and narrower than the OEM handlebar, so I feel that the weight of the bar end sharpens the cutting angle when turning.
I hope I can get used to it and stop worrying about it, but if it bothers me a little, I will consider replacing it.
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R SE, KAWASAKI ZX-4R SE, KAWASAKI ZX-4RR
Cosmo
Note that the OEM LED Blinker has a Large Coupler and will not fit through the wiring hole.
Other than that point, I'm glad I bought it.
View detail
Fits: HONDA FORZA, SUZUKI GSX1400, SUZUKI GSX1300R, SUZUKI GSX-S750, SUZUKI GSR750, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA NM-4, HONDA NC750S, HONDA NC700X, HONDA NC700S, HONDA CBR650F, HONDA CBR1000RR, HONDA CB650F, HONDA CB400SF, HONDA CB400SB, HONDA CB250R, HONDA HORNET900
Vibration reduction effect is only temporary
Mounted on CT110 HUNTER CUB JA55.
I was hoping for a vibration reduction effect, but I think it is only a comforting effect.
I chose Matte Black and it has no Habit and the texture is very nice.
View detail
subtle
I replaced the blinker of my CB400SB with LED about 3 years ago, but it broke recently. I don't want to use Large Land's product, so I have no choice but to buy this product for my CB400 blinker relay. I would like you to make it more durable. View detail