Reviews
Plating
At the time of my purchase, it was out of stock, so I went with Plating.
The center of the triangle often rusts.
I think Stainless Steel would be better.
View detail
Fits: YAMAHA TW225E, YAMAHA SR400, YAMAHA SR500, YAMAHA TW200, YAMAHA TW200
Is this what it looks like?
The thing itself is good, like Design and Included Parts:.
However, the tightening Band is hard to use.
As the carburetor would fall out of the carburetor when tightened, we extended the carburetor using the OEMAir cleaner hose.
View detail
Stainless Steel Fixed Nut
The fixed nut of the Exhaust System was old, so we replaced it with this Stainless Steel Black Flange nut.
It is rust resistant, stain resistant, and looks great.
View detail
Fixed Nut
I bought this for tightening the mounting fixed nut as it seems to have run out. It is rust-resistant Stainless Steel and is sold in small quantities, so it is very helpful. View detail
Handlebar Brace side thickness needs to be adjusted
I purchased this product at the same time to install the Handlebar Brace. When installing it, there was a gap on the Handlebar Brace side, and it was wobbly even when tightened tightly, so I installed it with two extra washers I had at home. If the gap is filled, there is no wobble, but if you install it normally, there will be a gap of 2 to 3mm, which is not an individual difference. Personally, I think it would be better if the color were a little more subdued. View detail
Black
Stainless Steel BlackScrew, which looks inconspicuous and rust-resistant Stainless Steel, is used to replace the Fixing Screw with this one. View detail
High! But cool!
It's just as the Title says, the Anodized colors are really beautiful and upscale!
But it's expensive lol Slotted screwdriver was used to install it. It's so cool, it's a Recommendation!
View detail
Mirror like mirror on the back
Aluminum cut-outs give it a very luxurious appearance.
The color is not too shiningly like Silver, but I bought Black chrome because I thought that Black would not feel like a change.
The surface is polished like a mirror, so it looks like silver plating or black depending on the surrounding environment.
(Personally, I would have preferred Matte Black, like an air-cooled Z.)
I was worried that the mirror surface was smaller than the normal Z2 Mirror, but since it is a convex lens, I did not feel it was difficult to see.
(The visible range is narrower because it used to be STD Size Z2 Mirror Convex Lens, but it is not uncomfortable.
(Although Size is not compliant with the latest safety standards, I think the vehicle is Large sturdy enough for inspection if the vehicle is pre-2006.)
The mirror part is not movable like Z2 Mirror, so the angle cannot be adjusted by hand.
I can't say enough about the build and texture, but the fact that it's too expensive is 3 stars.
View detail
Blowby gas can enter the Thermometer as it deteriorates
I purchased Repeat
The inside of the plastic lens has become dirty with blowby gas, so I disassembled it.
I managed to remove it and cleaned the inside of the Lens and the Meter panel and it was clean. However, I suspected that Gas was getting in through the bearings, so I bought Repeat.
If it does not suit, the Bronze portion may be transplanted.
The DAYTONA products we considered in comparison felt light to hold and seemed inexpensive to me personally, so we decided not to go with them.
View detail
Fits: HONDA MSX125 (GROM), HONDA MSX125 (GROM)
I wanted to change Adjuster.
The other day I pulled out my Motorcycle Axle Shaft for the first time.
At this time, I worked with a Jack and a variety of other tools, but it was surprisingly easy for a beginner to do.
At this time I was also able to remove the Chain Adjuster and decided to replace it, so I purchased it along with the tool.
If the Axle Shaft is removed and reinserted, it can be replaced if there is a kill.
View detail
Fits: SUZUKI GSR250, SUZUKI GSR400, SUZUKI GSX1400, SUZUKI GLADIUS650400, SUZUKI GSX-S1000F, SUZUKI SV650, SUZUKI V-STROAM250, SUZUKI GSX-S1000, SUZUKI GSX-S1000S, SUZUKI V-STROAM, SUZUKI BURGMAN400, SUZUKI GSX250R, SUZUKI GSX-S1000GT, SUZUKI V-STROAM1050, SUZUKI V-STROAM1050XT, SUZUKI V-STROAM1050DE, SUZUKI V-STROAM650, SUZUKI V-STROAM650XT
UltraHeavy weight adopted for the first time
I put on the Titanium color to match my Lever Gun meta, and the balance is not too bad, and the UltraHeavy weight is enough to reduce vibration. View detail
Fits: KAWASAKI ZZR1400, KAWASAKI NINJA ZX-14R, KAWASAKI ZX-12R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1100, KAWASAKI ZRX1100 II, KAWASAKI ZX-10R, KAWASAKI NINJA1000, KAWASAKI Z1000, KAWASAKI ZX-6R, KAWASAKI NINJA250, KAWASAKI NINJA250R, KAWASAKI Z250, KTM RC250 (KTM)
It looks good Gold color
Is a spacer used, is the bolt longer or shorter? There was no Instruction Manual, so it was difficult for a beginner to understand. View detail
I thought it would be useful to fix
I was happy with the Washer attachment to the Cap bolt, but I thought the Flange type was convenient, good for fixing, and looked nice. I bought this flange type to try it out.
It was normal. I think that there is no reason to buy a cap bolt with flange unless you are looking for a good price. I think it's a good idea to buy a cap bolt with a flange.
It would be nice if the selling price was lower.
View detail
Hmmm... subtle color difference.
[How is it used?
I bought this clamp to install on my brembo RCSRadial master. bremboOEM's MirrorHandlebar clamp (part number 110.A263.90) has a list price of 6,160 (tax included) Since the Mirror Adapter costs $3.99, it was stupid to spend a large amount of money on a Mirror Adapter, so I decided to endure with a patrimony (laugh).
Was the one you received as per Image?
The slightly different color is nice and looks like a pachimon! （Nice!)
Was the installation difficult?
Unfortunately, bremboOEM Bolt is not available (crying)
As you can see in the photo, the screw hole on the lower side of the Adapter comes in contact with the Bolt's flange, so the Bolt cannot go all the way into the Adapter. Well, in any case, it is an anti-theft material.:I was going to replace it with a Stainless SteelTorx bolt, though, so that's not a problem. Besides, bremboOEM bolt is just steel.
How was your experience with it?
No problem at all! If you look at it from 2 meters away, you can't tell the difference in color! (LOL)
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Where the colors are subtly different (laughs).
But Cost performance is top notch, so no problem!
Other items that would be helpful
Items to buy together:bremboOEM bolt is just steel, so it is recommended to replace it with a Stainless bolt.
Opinions and requests to Manufacturer:Please make it more like bremboOEM colors and master the path of pachimon! (LOL)
View detail
prevention of slackening
The fixed nut in the Exhaust System section loosened due to vibration and was missing, so we installed this one in the hope that it would prevent loosening.
The rebound of the Spring shape seems to be effective in preventing loosening.
View detail
Fixed
The Exhaust System fixing nut was loose, and when I noticed it was gone, I thought Flange nut would be better, so I installed it. View detail
![[Repair / Option Parts] Ultra Heavy Bar End Inner](https://img.webike-cdn.net/catalogue/images/110870/031969-00-10__TS.jpg)
New ModelGSX1300R HAYABUSA
Easily installed on a New Model GSX1300R HAYABUSA. It is heavy, but for this class of product, I would like it to be a little heavier. The price would be perfect if the price was a little lower because you can choose from other manufacturers. View detail
You can buy as much as you need.
It is nice to be able to buy in small quantities as needed, but it is still relatively expensive. View detail
Fits: BMW S1000R, BMW S1000RR, KAWASAKI Ninja250, KAWASAKI Ninja400, SUZUKI GSX250R, BMW S1000XR, HONDA CBR1000RR, KAWASAKI ZX-10R, KAWASAKI ZX-25R, SUZUKI GSX-S1000F, SUZUKI GSX-S1000S KATANA, SUZUKI GSX1300GSX1300R HAYABUSA, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
usually
There is no problem in STANDing.
It has quite a presence, so it could be a dress-up piece.
View detail
Tube for Wiring
I purchased a Tube to hide Blinker's Wiring and for Waterproof.
I put it through the Tube because it doesn't look good if the Wiring is exposed.
It is good to be unified and Refreshing in the same Black color as other Hoses. I am satisfied with it.
View detail