Reviews
Cap bolt is also a Quantity:Set product.
[How is it used?
I purchased this product because I wanted to replace the bolt for fixing the exterior of the head, which had become licked as I repeatedly took it off and on.
Color and Cap bolt are Quantity:It is convenient to say it is convenient because it is a Set.
Was the one you received as per Image?
Standard for this type of aluminum spacer. FUJI TUBO type. The product was just as beautiful as the image on Webike's website, and it was exactly as shown in the image, without the uneven staining that is common in low-priced aluminum collars from other companies.
Was the installation difficult?
There is nothing difficult about this product, as it is installed by biting it in place of a washer when using a cap bolt.
How was your experience with it?
Since it is made of aluminum material, each piece is light in weight and can also serve as a washer, making it a very convenient product that can be used in a wide range of applications.
One point can be used to attach a License Plate or to fix an accent to the exterior of the body, which is somewhat plain on the BoltSingle Body.
It is not lightweight, reinforced, etc. (strictly speaking, there is a slight increase in color), and it costs a lot of money, but I like this kind of product, and I am very grateful for it.
The appearance is that of the FUJI TSUBO Type Design from a generation ago, so in the age of 2025 Fashion!" I'm not a middle-aged person, but I'm not a trendy middle-aged person.
[Included Parts:were they on?
Normally, only the aluminum collar is sold for this type of product, but this product includes the cap bolt as well as the quantity.:It is a set, so the price is not cheap, but it is easy to use.
[Was there anything that disappointed you?
If you like the design as shown in Webike's image, you can buy it. Disappointing. It is lightweight enough.
Make good use of the wide selection of 11 colors to add flair to the Accent of your car body.
Other items that would be helpful
Point and hang of installation
As mentioned above, it is like a fashion color used in place of a bolt washer, so it is a simple job to use the Barnacle Collar when attaching a cap bolt of the appropriate length to the bolt stop on the attachable part.
[Availability and clarity of the Instruction Manual
No Instruction Manual is available
The ease of understanding is at the top level, so I don't think that wrong usage is likely to occur (unless you get twisted and use it in a different way on purpose).
[Notes]
None in particular, in Color variations. The color tones are different from what I saw in the picture." There may be some things that are not so common in motorcycle accessory stores anymore, but that may not be a problem.
[ITEMS TO BUY TOGETHER
Cap bolt and color are Quantity:However, if you wish to use it for fixing numbers, etc., please purchase the required number of M6 size washers and nuts for the reverse side separately.
[Opinions and requests to Manufacturer
Please make the price a little lower so that I can easily purchase large quantities.
View detail
LED Conversion of Old Motorcycle
The old Filament bulbs were replaced with LEDs. I would like to see a newer design, but I guess that's impossible because of the age of the car. The installation is easy and I am generally satisfied. I am dissatisfied with the high price.
The image is when Brake is lit.
View detail
Position is a Large cut.
Used on JK05, a Conversion from JF28, no need to adjust the position of the SwitchHolder holes. However, there are no holes in the product, so you have to drill them yourself. It may be time-consuming.
The position is Flat, about 5cm lower than OEM, so that the Accelerator Wire does not hit the Cowl Limit.
It goes from a NORMAL American-like position to a Naked sports-like position.
I am 167cm and it feels like it lightly hits the SeatBack.
View detail
Fits: KAWASAKI ZZR1100/ZX-11, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI ZRX1100II
Standard classic
Was the one you received as per Image?
As per Image.
Was the installation difficult?
It's easy
How was your experience with it?
Looks cool.
View detail
Anodized is Beauty, accurate and reliable!
[How is it used?
I purchased this as Overhaul for Repair as I am replacing it with CB50Fork.
Was the one you received as per Image?
As per Image, Anodized is Beauty and high quality but inexpensive, which is helpful.
Was the installation difficult?
It is easy to replace the original banjo, but it requires hang to bleed the air.
How was your experience with it?
It is more secure than the inferior Chinese products that are inexpensive and distributed in Large quantities.
The one we are using now has been working for years with no leaks.
[Included Parts:were they on?
Two Aluminum Gaskets are also included.
[Was there anything that disappointed you?
Not particularly
▼I would like to see the Gold type restored as there used to be a Gold type.
View detail
It works.
Used when handlebar was changed from Semi-up to HI UP of the same manufacturer.
The vibration was a concern at the time of Semi-up, so we installed it as insurance, but it was reduced from Semi-up, so it must have been effective.
Still, it only weakens and does not go to zero, so it can be felt, but the satisfaction level varies from person to person.
I think this type is good for those who seek comfort even if they want to keep the Retro style and customize it.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI ZX-25R
A little outward.
This collar can be used to offset Caliper to the outside. It is easy to install as it is properly aligned. If you put a flashy color on it, it will have a strong presence. .... View detail
Is it sensitive to ultraviolet rays?
I put it in a Screen Fixing Screw, but I found cracks on 3 out of 6 screws, perhaps due to UV exposure, so I bought it for replacement. I have no problem with the quality if I consider it as a consumable product.
This time I bought it at the same time with Seat Cowl and for Side Cover for 6Millimeter screw.
View detail
It's degrading
I put it in the Screw of Seat Cowl and Side Cover to prevent vibration, but I bought it for replacement because there was a cracked part after about 2 years due to deterioration.
Since it is polycarbonate, I think it is necessary to be careful about cracks caused by over-tightening.
View detail
For fine tuning
Used to compensate for Cowl Bracket Gap in combination with other thicknesses of Spacer View detail
Fits: HONDA CB400SB, HONDA CB400SF, HONDA CB650F, HONDA CBR1000RR, HONDA CBR650F, HONDA FORZA, HONDA FORZA, HONDA GROM, HONDA HORNET600, HONDA HORNET900, HONDA NC700S, HONDA NC750S, HONDA NM-4, HONDA PCX125, HONDA PCX125, HONDA PCX150, HONDA PCX150, SUZUKI GSR750, SUZUKI GSX1300R, SUZUKI GSX1400
Heavy and good design!
After all, Bar End must be Posh!
Good design! Good weight! The only complaint is the price.
View detail
Looks surprisingly good on you.
As the name suggests, the Mirror of this round type is an image that suits Kawasaki's NAKED, but it also looks great on the XSR, which is classified as a Neo-class.
Also, the Material:Aluminum is not as expensive as foreign makers.
View detail
Spacer
Purchased to fine-tune the standing width between the Screen and the Screen stay. View detail
uplift
It is used to create an angle between the Screen stay and the Screen. It is black, the same color as the Bracket, so it does not stand out and is unobtrusive. View detail
Well, the Gold amount is acceptable.
Conversion Connector for Bosch wide watt blinker relay.
Convert 4 wires on the body side to Relay 3 wires.
My Motorcycle, a CBR650F, has 4 wires on the body side, so I needed this product to install a wide watt blinker relay.
The coupler shape is 4-wire, but as you can see inside, the wire itself is 3-wire (because the Relay is 3-wire). (Relay is 3-wire).
Therefore, Hazard will not be available when the key is Off.
The ICRelay fits in the place where the regular Relay fits, but since this product must be used in a way that it pops out from there, a great deal of ingenuity is required in the way it is delivered.
Gold price is a little over 500 yen, which is quite inexpensive considering the cost of the product. (It is common for this type of product to cost 1,500 yen just to connect the wiring and resistor, so this is cheap enough for a couplet-on).
View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI ZZR1400
One point?
I have been using OEMRelease for ZZr1400, but I wanted to make it Gold.
Installation is easy, but the Clutch needs to be vented.
I am satisfied with the custom feel.
View detail
Couplet-on for easy installation
Used on the last model of CB400SUPER BOLDOR.
The bulb Blinker was replaced with an LED Blinker as well.
The Relay position is under the Tank, so sound is not a concern.
Instead, the replacement process was Large strange.
Not directly related to Relay, but I want it to last as long as possible.
Wiring was too long to fit, so it was bent sideways and pushed in.
The OEM WaterproofRubber cover will be facing up or sideways so water can get in. This makes it a *−1.
It would be better if there is an OEM Type without Wiring.
In general, it is a good product.
View detail
Used for PWKSetting.
Used for Chinese PWK.
It's a Jet, so there's nothing to write home about it, but it's cheap but made with precision.
I can use KEIHIN-compliant Jet for Chinese PWKs, which is very useful.
I think it is a necessity at the time of Setting.
View detail
Fits: SUZUKI GSX1400, SUZUKI GSR400, SUZUKI GLADIUS650400, SUZUKI GSR250, SUZUKI V-STROAM250, SUZUKI SV650, SUZUKI GSX-S1000F, SUZUKI V-STROAM650, SUZUKI V-STROAM650XT, SUZUKI V-STROAM1050DE, SUZUKI V-STROAM1050XT, SUZUKI V-STROAM1050, SUZUKI GSX-S1000GT, SUZUKI GSX250R, SUZUKI BURGMAN400, SUZUKI V-STROAM, SUZUKI GSX-S1000S, SUZUKI GSX-S1000
A wide variety of colors
It is inexpensive, has many color variations, and the quality is not bad.
Installation is easy with only a Driver.
It is kind of nice that it has an Adapter to match the Handlebar diameter.
Vibration isolation is not expected.
I think it is a dress-up oriented product.
View detail
Large change was saved by the SPIDI-like response.
I found this product on this site when my touring date was approaching. I am very pleased with the immediate delivery and the large size.
At first, we tried to place an order for the manufacturer's product through a motorcycle shop, but we were told that we would have to check the inventory and place the order at the end of the week.... I got only a carefree response like, "We'll check the stock and place the order in the week after tomorrow....
I am appalled at the totally outdated response.
This time I was satisfied with the Large change to this Site's Service.
View detail