Reviews
It is an ordinary Bolt.
Since I did not have the target length at Home center I bought it.
It is with the standard Bolt which is sold at Home center. I used it for fixing Blinker.
View detail
It's your favorite Stainless bolt!
Brake Shoe Exchange - - - Exhaust System detachable - - - With ~ Exhaust System installation BoltQuantity : 2pc also like your favorite Stainless bolt (8X45) I exchanged it! - - - Whoa! It was Race ish! (Lol) View detail
Material : Stainless Steel's Black is good.
Silver's Bolt became conspicuous in appearance when purchasing Rear carrier on MAJESTYS and purchased this product. Material : Stainless Steel also prevents rust and becomes inconspicuous. Black is a little smarter than Standard's Bolt so Black Material : I bite Washer of Stainless Steel and installed it.
View detail
Classic
I've been using lots of stuff, but with Stainless Steel Black's Bolt is not something...
As a color of this product, it is a matte black.
Size is also wide, so I think that it can be used in various parts of Motorcycle.
There is no complaint in the quality of the product itself
- expensive
- I also want a shape other than Cap bolt
If these two points are to say strongly, is it dissatisfied?.
View detail
I hope the color is inconspicuous.
It's like an OEM at Black
Because it is Stainless Steel, it is red and it is good that it does not rust.
Just replacing Bolt and Nut with old Motorcycle,
It looks pretty good looking.
View detail
Insulation Mat
Since buell is a V-type 2-cylinder Engine, hot air from Rear bank is caught under Seat, Seat is very hot and sitting is painful and I was thinking about something..
After finding this product which we are watching a lot and evenly sticking it under Seat, I felt almost no heat, became very comfortable and became able to concentrate on driving.
I really bought it!
View detail
Bolt replacement will be this shape
Taper cap bolt which became popular in the 1990s can be made cheaply.
The main part had already been changed to Titanium, but Titanium was stoppable at the part where power is unnecessary.
If it is about this price you can change it little by little in the range of Small Mailing
View detail
Stainless Steel's BlackCap bolt
I bought it for fixing the License Plate.
Purchase Cap bolt & Nut set for fixing License Plate already made by the company - Although I was wearing it, I bought it for additional because Silver's Bolt which I attached was noticeable conspicuously.
【What made you decide the purchase?】
Most of Black 's Cap bolt sold at a general home center is made of iron, especially if it is a place where water splashes like the surroundings of the License Plate are intense, it rusts first.
So I found this product and jumped.
【How was it actually used?】
The combination with the company's Black Anodized Cap bolt holder is the best-looking.
I never imagined that it would be cool so far just by adding one hand at a cheap price.
【Mounting was difficult?】
It is the same as Cap bolt of Level sold at Home center. It was made, so I could install it without difficulty.
【Please tell me the installation point and hang】
General Cap bolt and same etc. Because it is making. There is no problem if you use proper tool.
[Is there anything I was disappointed about?]
no problem.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I do not think there can be any help because there is only a niche demand, but Cap bolt Quantity : I thought that price was high for 2pc.
【Have you compared items?】
nothing special
[Others]
Those who are wearing the company's License Plate fixing Cap bolt & Nut set will see chillahora both in town and at Touring, but I have never seen those who stick to Bolt.
I think that it is good to do a large Custom, but occasionally putting your hands on fine parts makes it look beautiful and beautiful.
View detail
Insulation Mat
Buell is getting hot as the Frame burns because the Exhaust System from the Rear bank's Engine is passing through the Frame and buying for countermeasures.
When installed in the proximity of the Exhaust System of FrameReverse side, the temperature dropped to warm place from hot, and very good result was obtained.
Those who are thinking about how to handle the heat of Frame, I wonder if it is included in the choice.
View detail
Engine protection from heat
【What made you decide the purchase?】
Since we installed resin tank, we bought it for heat resistant processing.
【How was it actually used?】
Engine heat, fuel Pump breakdown and Gasoline could be used without boiling.
Because we are using Glass Wool for Cut, it is attentive as it gets scratchy when you get to your skin.
【Was it difficult to install? (Hard parts case)】
Work was easy, because Double-sided Tape is on the back.
[Is there anything I was disappointed about?]
There is none
【Hope for Manufacturer - Please let me know if you have any improvement points]
There is none
【Have you compared items?】
There is none
View detail
Number Used for installation
Purchase for installation. It was just right Length with Nylon Lock Nut on 2 Flat washerx. (2 to 3 peaks protruding) I also thought about Color Anodized Aluminum, but I already know my age and I think that it was the right answer to this chic eventually. The original Bolt & Nut comes to rust soon.
License Plate Bolt is one of the places to exchange immediately after delivery.
View detail
Black Bolt is this!
It is Ripi buying.. Black Bolt is limited to this!. Quality is good, black paint does not accumulate. I do not care if it's nonchalant Fashion.
Recommendation to those who are concerned with details.
View detail
To people who are concerned with color
I painted GIORCUB 's Carrier in black, so I decided to buy Bolt and Black as well, so I bought it.
Such products are not likely to be in the home center, so it will be helpful.
Material : It is also good to make with Stainless Steel, it does not matter at all.
View detail
VFR750F (RC24) I used it for. It is preeminently good.
For V type Engine Rear bank or Seat "warm" Especially in summer "Hot and uncomfortable" is.
Also, seat sponge seems to heat up, so once it gets hot it will not cool down easily.
I thought I should try making a shielding plate, but I thought that it was a simpler way and I bought it.
Pasting itself is simple because the whole is in the shape of a tape.
Just when the part of the edge is left uncut, the insulation Wool in the inside seems to slacken.
I handle with Gum Tape and I do not have any problem with Large.
In terms of performance "warm" It becomes only to degree "Large satisfaction" is.
Well, I think I will not use it for purposes, but it seems a bit NG to the visible part.
View detail
I think it's good.
By installing the Fender Eliminator Kit, NORMAL's Bolt's Length has run out, so I bought it.
Length is just right.
In addition, although NORMAL was Silver, since Motorcycle is unified with White and Black, I made it to Black Bolt, but I am satisfied with being cool.
View detail
In Spanner △
Bolt to be tightened can use 17 mm Spanner, but since workability is better when tightened on the Nut side, I think it would be convenient if there is a ratchet Spanner that Bolt can Penetrating View detail
Available in small quantities ○.
Bolt also unified to Black according to the Black Anodized processing of the aluminum collar of the Rear suspension attachment part. It is difficult to obtain Bolt with a small amount, but this item is Quantity : I think that 2 pcSet is good. I think that the price is a little expensive, but I am saved because I can get a small amount.
View detail
It sticks on the flesh side of the Tank of CB400SF, and made engine heat not get across to the body.Even all fragments fine in area were used, and most Tank flesh sides have been covered.The heat insulation effect was found clearly.Although it is sti
It sticks on the flesh side of the Tank of CB400SF, and made engine heat not get across to the body.Even all fragments fine in
area were used, and most Tank flesh sides have been covered.The heat insulation effect was found clearly.Although it is still hot in summer, is it better until now?Although it is likely to become impossible to feel warmth in the winter of
, it is satisfied with the heat insulation effect.
View detail
Since the Polyethylene tank of the external article was also changed into the flume Big tank, it stuck on the measure against heat. Although high speed operation / traffic congestion way was run about 160 km in 30 air temperature, I think whether to
Since the Polyethylene tank of the external article was also changed into the flume Big tank, it stuck on the measure against heat.
Although high speed operation / traffic congestion way was run about 160 km in 30
air temperature, I think whether to be the engine performance which may be trusted, since there was also no problem in particular.
It may be safer to keep away from dress with a Vinyl sheet etc. at the time of
, in addition processing.
It is .... itchy in case of work (carrying out itself is Allais!) with the
short-sleeve undershirt.
View detail
In order to use imitation parts, although purchased, also with scissors, it is easy to cut, and was very easy to carry out processing this time. I would like to ask, when there is an opportunity to use again.
In order to use imitation parts, although purchased, also with scissors, it is easy to cut, and was very easy to carry out processing this time.
I would like to ask, when there is an opportunity to use again.
View detail