Reviews
Bolt replacement in prominent areas allows you to use it without worrying about Rust!
[How is it used?
I purchased this to replace the Fender mounted Bolt on the Front fork.
Was the one you received as per Image?
It was shiny and high quality, just like the Image.
Was the installation difficult?
It can be easily installed by simply replacing the Bolt with a NORMAL Bolt.
How was your experience with it?
It can be used without worrying about Rust.
It is also shiny, though not as shiny as Plating, and good for the price.
[Included Parts:were they on?
No other than Bolt.
[Was there anything that disappointed you?
Not particularly
We do not recommend this because we are afraid of gnawing on the area where the heat is applied.
I appreciate the wide variety of lineups, such as ▼length and large size.
View detail
Alternative to OEM Product!
When I took my NC750X out of Garage to wash it, I noticed that the Bolt on the Rear CarrierStay was missing.
It was not a place where you can easily remove it, and there were two places. I thought it might have been stolen, but I had to find a replacement. I was worried that it might be stolen, but I bought a replacement because it was not available.
View detail
Cap bolt is also a Quantity:Set product.
[How is it used?
I purchased this product because I wanted to replace the bolt for fixing the exterior of the head, which had become licked as I repeatedly took it off and on.
Color and Cap bolt are Quantity:It is convenient to say it is convenient because it is a Set.
Was the one you received as per Image?
Standard for this type of aluminum spacer. FUJI TUBO type. The product was just as beautiful as the image on Webike's website, and it was exactly as shown in the image, without the uneven staining that is common in low-priced aluminum collars from other companies.
Was the installation difficult?
There is nothing difficult about this product, as it is installed by biting it in place of a washer when using a cap bolt.
How was your experience with it?
Since it is made of aluminum material, each piece is light in weight and can also serve as a washer, making it a very convenient product that can be used in a wide range of applications.
One point can be used to attach a License Plate or to fix an accent to the exterior of the body, which is somewhat plain on the BoltSingle Body.
It is not lightweight, reinforced, etc. (strictly speaking, there is a slight increase in color), and it costs a lot of money, but I like this kind of product, and I am very grateful for it.
The appearance is that of the FUJI TSUBO Type Design from a generation ago, so in the age of 2025 Fashion!" I'm not a middle-aged person, but I'm not a trendy middle-aged person.
[Included Parts:were they on?
Normally, only the aluminum collar is sold for this type of product, but this product includes the cap bolt as well as the quantity.:It is a set, so the price is not cheap, but it is easy to use.
[Was there anything that disappointed you?
If you like the design as shown in Webike's image, you can buy it. Disappointing. It is lightweight enough.
Make good use of the wide selection of 11 colors to add flair to the Accent of your car body.
Other items that would be helpful
Point and hang of installation
As mentioned above, it is like a fashion color used in place of a bolt washer, so it is a simple job to use the Barnacle Collar when attaching a cap bolt of the appropriate length to the bolt stop on the attachable part.
[Availability and clarity of the Instruction Manual
No Instruction Manual is available
The ease of understanding is at the top level, so I don't think that wrong usage is likely to occur (unless you get twisted and use it in a different way on purpose).
[Notes]
None in particular, in Color variations. The color tones are different from what I saw in the picture." There may be some things that are not so common in motorcycle accessory stores anymore, but that may not be a problem.
[ITEMS TO BUY TOGETHER
Cap bolt and color are Quantity:However, if you wish to use it for fixing numbers, etc., please purchase the required number of M6 size washers and nuts for the reverse side separately.
[Opinions and requests to Manufacturer
Please make the price a little lower so that I can easily purchase large quantities.
View detail
Fits: HONDA NSR250R, HONDA RC45, HONDA RC30, HONDA NC35, HONDA NC30, HONDA RC45, HONDA RC30, HONDA NC35, HONDA NC30
big
Different size, but used on ZX10R.
Spec. 30mm, while 10R is 32mm, so it will come off easily as it is.
I put it on and hit it with Hammer and it deformed nice.
It may be bigger and uglier than expected, but when I ordered a Universal Product for 32mm, I received a monstrous pin about the size of a smartphone, so this is my only choice.
View detail
Almost OEM
In SR's case, the OEM's mall is halfway between
Only length is available. Sober Parts
However, it is necessary to properly use the Seat.
Since it is possible to cover up to
It is surprisingly Recommendation. Installation is
Rubber hammer as it can be slightly stiff.
without having to remove the Tank if the
It can be installed cleanly to some extent.
SR is 2m with a little extra.
Both Sides has a slightly exposed portion of the genus Gold.
before installation as it may cause rust.
You can cut off a little bit of both ends.
View detail
It can replace and dress-up existing bolts.
This product can replace and dress-up the existing Bolt, and it is Rust resistant and highly polished, but it would be nice if it were cheaper! View detail
Screw Change
The screw is also changed to this Stainless Steel at the installation position of Rear Sets.:1 Set of 2pcs., I like that the price is not that much. View detail
Measures against Handlebar Up Type
STD Handlebar is completely unnecessary.
However, if you have replaced the Handlebar with the Handlebar Up Type, this is a must have part.
I was using the other for VehicleEasyFitBar, and the length of the Normal wire was enough for the Limit, but the Handlebar was too long for the Quantity.:Pair (for Left and Right) I had to replace it because I was getting the symptom that Axel would not return only if I swung it one way or the other.
I would have rated it higher if the platings were a little more careful, but the price is right, so I'll leave it at that.
View detail
For Blinker repair.
I used it on a non-posh product, so I had to modify it, but it worked fine. View detail
Fuel tank insulation
When I changed my fuel tank to aluminum before, I bought this kind of insulated seat. I bought it for Repair because it was worn out. I bought this one because the Manufacturer's one I bought before was out of stock. I've been using it for a long time and I've never had a problem with it. View detail
exchange
I bought this Stainless SteelBlack in order to match the color to my Brembo caliperBlack.
It will look good, but if you replace all of them for the number of units used, it will be a bit pricey…
View detail
It's thicker than I expected.
I used it as an insulator for Race cowl.
It was thicker than I expected and it interfered with the exhaust pipe.
However, the material does not stick to the exhaust pipe due to heat, etc., so the insulation is more than adequate.
View detail
Tandem Footpeg's screw holes are hidden
Used to hide the screw holes after removing the Tandem Footpeg. m8×20
I think the bolt is black and the screw holes are well hidden.
I think it's a bit pricey, but I'm happy with it.
View detail
Mount it on MONKEY!
Replaced with WSocket from Single socket. BlinkerBodyManufacturerUnknown, but this is a little bit around the perimeter of the Socket. It was cut and installed. Since the attached Grounding Wire was unnecessary, it was cut. View detail
I'm a stickler for details
It's a bit pricey, but it's a black color Button in Stainless Steel If you want to pay attention to the details of what you're using with a cap bolt, I'd recommend it This length was not readily available in the actual store View detail
A must-have for Ska tune!
important item
[Was there anything that disappointed you? None
Do you have any wishes or improvements you would like to make for the Manufacturer? If you have a device that prevents rain from entering, you'll be more comfortable
[Do you have any products to compare it to? kijima
Frequently Asked Items
What made you decide to buy? There is also a TW version on the market, but the FTR version fits better Easy
How was your experience with it? I thought I needed the Carburetor setting as well, because it makes it easier for the air to flow The air screw was tightened to make it easy to start I tightened the air screw to make it easier to start
Was the installation difficult? We have removed the existing Air Cleaner Box
【Please tell me the installation point and hang】 The air cleaner's hose is so tight that it will stay in place even when it's plugged in, but Hanging it with a tie rod etc. is more reliable
[Was the Instruction Manual easy to understand?
[Included Parts:were they on?
[Others]
View detail
That's usually good
Plus screws can be licked, so the parts used in maintenance have to be replaced with these It is
Be careful not to use it on electrical parts because it is Stainless Steel, so there may be a problem with the electrical continuity Please give me a copy
View detail
When there is no supplier nearby
In addition to the details of M 10, Black's Stainless bolt also has no handling at home center in rural areas, so it is good to purchase with Small lot.
As Bolt, the finish is rare and it is normal.
I think that there is neither surface treatment nor unevenness.
The unit price is high, but it is recommended for those who do not have a purchase route close to the small lot required.
View detail
It is an ordinary Bolt.
Since I did not have the target length at Home center I bought it.
It is with the standard Bolt which is sold at Home center. I used it for fixing Blinker.
View detail
Fits: YAMAHA TW200, YAMAHA TW225E, HONDA FTR223
Power FilterSpec.
I bought it for change to Power Filter. There were a number of Manufacturers, products and I was worried but the shape and price became a key factor. Large It was an inexpensive price, but the detail making was also solid, I am satisfied with Large change. View detail