Reviews
It's also practical.
It is also useful for attaching and detaching the Fuel Tank from the Edge of the Fuel Tank, because the space between the Tank and the Frame is limited to prevent damage to the Tank and the Frame. View detail
Used in Crankcase Bolt
I bought it because the bolts on the Crankcase of the Engine have been blowing white powder and I wanted to replace them. It is hard to change the length of the bolts because the length is different in each place, but the Cap boltheads make the Engine look better and my car is refreshed. View detail
Used for Engine (Crankcase)
I bought it because the bolt of Crankcase of Engine has been blowing white powder. The shining Cap boltheads make Engine stand out and my car was refreshed. View detail
Used for the Engine Generator Cover
I bought it because the bolt of the generator cover of the Engine has been blowing white powder, I wanted to replace it. View detail
Used for the Engine Generator Cover
The bolts of the generator cover of the engine have been blowing white powder, so I wanted to replace them. But if you buy POSH, you can buy all bolts in Lineup. The Cap boltheads make the engine look great and I was able to refresh my car. View detail
Used in the Clutch housing of the Engine
I bought these bolts together with the generator and the generator cover because the bolts on the Clutch housing of the Engine were blowing white powder. Since I replaced them all together, the shiny cap bolt heads make the engine look great and my car looks refreshed. View detail
Used for Water Pump Cover of Engine
The bolts around the engine were blowing white powder and I wanted to replace them. I replaced them all together so the total coordinate is perfect. Other manufacturers do not have them all together so I chose POSH. The shiny Cap boltheads make the engine look great and I was able to refresh my car. View detail
Not only fashionable, but also practical products
"It's a mall that attaches to the Rim of the Tank, and I think it's handy for people who take the Tank off and on a lot. It won't scratch if you roll it on the ground.
You don't have to use glue or anything like that to make it Gap-free, but it's so biting that the paint might come off when you remove it.
That's my only concern. "
View detail
It's thicker than I expected.
I used it as an insulator for Race cowl.
It was thicker than I expected and it interfered with the exhaust pipe.
However, the material does not stick to the exhaust pipe due to heat, etc., so the insulation is more than adequate.
View detail
expensive
The price is high, but it works fine.
Better yet, Quantity:Pair (for Left and Right) I regret that I should change the
I wish it was a little cheaper.
Lippido is not honest.
View detail
Clean and cheap. A classic.
Repeat products that I buy in bulk because of their good finish, such as license plate set screws and Crankcase. Sort of. It's a great way to get a custom motorcycle look. View detail
This is what you'll see.
I use cosmetic bolts around the Cockpit and other places that I usually touch or see with my hands because Hex screws are not good enough. The yellow color of the bolts is more or less the color I bought, and the accuracy of construction is good and beautiful. On the other hand, it doesn't have a race ish look to it, so if you use it for your concept, it will look a bit tacky. View detail
Tandem Footpeg's screw holes are hidden
Used to hide the screw holes after removing the Tandem Footpeg. m8×20
I think the bolt is black and the screw holes are well hidden.
I think it's a bit pricey, but I'm happy with it.
View detail
Mount it on MONKEY!
Replaced with WSocket from Single socket. BlinkerBodyManufacturerUnknown, but this is a little bit around the perimeter of the Socket. It was cut and installed. Since the attached Grounding Wire was unnecessary, it was cut. View detail
น็อตพอส ของแท้มีสีสันสวยงาม ไม่ลอก ไม่ขึ้นสนิม น้ำหนักเบา View detail
น็อตพอส สีดำของแท้มีสีสันสวยงาม ไม่ลอก ไม่ขึ้นสนิม น้ำหนักเบา View detail
I'm a stickler for details
It's a bit pricey, but it's a black color Button in Stainless Steel If you want to pay attention to the details of what you're using with a cap bolt, I'd recommend it This length was not readily available in the actual store View detail
A must-have for Ska tune!
important item
[Was there anything that disappointed you? None
Do you have any wishes or improvements you would like to make for the Manufacturer? If you have a device that prevents rain from entering, you'll be more comfortable
[Do you have any products to compare it to? kijima
Frequently Asked Items
What made you decide to buy? There is also a TW version on the market, but the FTR version fits better Easy
How was your experience with it? I thought I needed the Carburetor setting as well, because it makes it easier for the air to flow The air screw was tightened to make it easy to start I tightened the air screw to make it easier to start
Was the installation difficult? We have removed the existing Air Cleaner Box
【Please tell me the installation point and hang】 The air cleaner's hose is so tight that it will stay in place even when it's plugged in, but Hanging it with a tie rod etc. is more reliable
[Was the Instruction Manual easy to understand?
[Included Parts:were they on?
[Others]
View detail
Fits: KAWASAKI Universal, KAWASAKI Universal
I am satisfied.
I bought these to install an external blinker Initially, Male?FemaleQuantity:I bought the Set one, but it broke off when I crimped it and I bought an additional one, just for the Malle I should have chosen this one from the beginning because it was good It's good because it's difficult View detail
Fits: YAMAHA TW200, YAMAHA TW225E, HONDA FTR223
Normal good
I changed to Power FilterSpec. and bought it for the treatment of Blowby gas It was
I think the pressure loss is small because of the good cost performance and the large hole diameter
It's perfect for SmallEngine Displacement Volume vehicles
View detail