Reviews
Universal and easy to use
Material:Stainless Steel 8mmCap bolts are available at Home center in various lengths (about 150 yen per pc).
Even if it is not a car-specific product, this one from Universal was sufficient for me.
Also, there is no extra Logo, etc., which is nice and clean.
View detail
Compact Cargo Hook
It does not protrude more than the Clubba and fits better. The Net Hook should be more compact to fit in the case of the Clubba. I used the same Posh face color SpoolM8x30mm and Stainless boltM8x105mm. View detail
Loading Hook
A Loading Hook has been added for easy use of the Net to supplement the capacity of the Small TypeTank Bag. On the back side, a Loop is threaded through the Club bar.
I used the same Posh face colored Spool M8x30mm and Stainless bolt M8x120mm as the Loading Hook without any modification. I think a M8 x 25mm colored spool or a 1cm short Loading Hook would have been fine. However, in the case of the Short Hook, the inner diameter is too large to interfere with the Club bar, and a thin Hook made of gold might be better suited for this purpose.
View detail
Used as anchor bolt for REBEL250
It was used as an anchor bolt for REBEL250.
Recent Motorcycle has no Loading Hook because of CostCut.
It will be installed as a retrofit, but the car-specific products are quite expensive,
We think it is a good idea to use such a Universal Product.
This product comes with a 30mm Bolt, but with a slightly shorter exit allowance,
A separate 35mm Bolt will provide the same amount of output as the OEMBolt.
(Even Bolt with "Included Parts:" can be used as long as it is firmly tightened.)
One note on installation.
For OEMBolt, after removing one part, temporarily fasten this product and then remove the next part.
If you remove the Bolt holes in two places at the same time, the Bolt holes will shift, making it difficult to install and licking the Screw holes.
Also, the OEMBolt is tightened at a ridiculously high Torque, so it is hard to loosen the Bolt.
If you find it difficult, you should honestly ask Shop for help.
View detail
I am concerned about Bolt's Size.
Here are my impressions after installing on a Triumph SpeedTWIN1200.
Since there was no place where a Net could be attached, it was installed in the form of replacing the Bolt on the Rear suspension.
The work was easy and securely installed, and the Net is now ready for use.
Also, the texture is adequate for the price.
I bought Black, and if I wanted, I would be happy if the center Bolt was also Black.
Bolt size was a concern during installation.
The length was fine, but the diameter was slightly smaller than M8, and I was a bit concerned about the possibility of the mountains licking if I tightened the screws too hard.
(It may be correct to say that the Frame side may be just slightly larger than the M8, so it is not an outstanding match when installed on SpeedTWIN.)
I'm generally satisfied.
View detail
Mounted on KTM 250 ADVENTURE
Replaced with Inner fixed Bolt by Tail Cowl.
Since the KTM 250 ADVENTURE does not have any kind of Loader Hook, we will use the MOTOFIZZPlate hook3 and the DAYTONATouring hook as a loader point to be used together.
The 25?Cap bolt that came with it was usable as is with no length issues.
View detail
PoshNet Anchor
I bought it because I like the color. The paint has not peeled off so far. View detail
Sakka who surely saw as other impression -- custom . although it is slightly high -- a design -- good -- I consider. It is a recommend at those who want to change appearance!!!
Sakka who surely saw as other impression -- custom .
although it is slightly high -- a design -- good -- I consider.
It is a recommend at those who want to change appearance!!!
View detail
Not used, but definitely stands out.
[How is it used?
In my case, I am converting to Single Seat, so I do not use Net Anchor. It is completely decorative.
Was the one you received as per Image?
Lightweight and textured as expected.
Was the installation difficult?
Simply replace with OEM. Anyone with a tool can replace it.
How was your experience with it?
I haven't used it, but I don't think it's a problem.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Other items that would be helpful
Point and hang of installation
It is better to check the installation torque. In my case, I tightened it too much and the single seat cowl did not fit well (because the rear cowl was twisted?). I think people who have GSX1300R HAYABUSASingle seat cowl can understand this.
[With or without Instruction Manual
Posh, so a simple Instruction Manual is available. Anyone can install it.
View detail
Installed on all owned Motorcycles
The Bolt that comes with the Number is Rusty, so I always replace it with this product. View detail
Good product
good point
The body is aluminum and light.
I've been doing well, and I've never missed a hook on the touring net.
A bad point
None.
View detail
It looks better now!
Glad I replaced it with a beautiful Gold that looks and feels more classy!
The only thing is that there is no drill for this kind of parts.
View detail
"Use for other purposes." (Never copy.) (Never try to copy.)
[How is it used?
MONKEY125. "SeatMounting Bolt Hole." I used it to block the
Was the one you received as per Image?
glance "Plastic?" I thought it was a Material:It is Camouflage that the processing of Anodized looks like plastic.
Was the installation difficult?
"M8Stainless screw" So, the NORMALMounting Bolt and "It doesn't feel like it's tightening up." It is necessary to pay attention in
After installing this product "NORMALMounting Bolt" You should think that you will not be able to get
How was your experience with it?
It's just like the picture, but in a more personal way. "We've achieved our goal. I think
[Included Parts:were they on?
None
[Was there anything that disappointed you?
"Noncompliant and self-imposed." So, no.
[Notes]
This product "Loading Hook for Expansion." This is the first time that the Company has been able to do so.
natural "Pon attachment" This is not the case. It is necessary to measure the dimensions of each part and devise a way to install it.
"Use for other purposes." So, "Ingenious." We don't describe the following information, and please be careful not to imitate the installation & operation, because it is all your own responsibility.
View detail
Nice touch!
I bought it as a Loader Hook for the front side of the MT-09.
Originally, Loader Hook is attached to Tandem Footpeg, but there is no Loader Hook because Tandem Footpeg has been removed.
I found a place where I could install Loader Hook, so I put it here.
I got a good deal on the cord as well.
View detail
Parenthesis looking good
PointI was close to the expiration date, and I had been wanting it for some time, so I took the plunge and bought it
I like it because it matches the color of my motorcycle However, I wish there was a plastic washer on the mounting part of the motorcycle to prevent scratches I thought
View detail
Beautiful
I have them on all my motorcycles, Defferential Gear Because the Volt in the faux is rusty and dirty
I haven't used it as a Hook, but I like it because of the texture
View detail
5 stars
Z1000 ABS 2017 Model has a Loading Hook with Tandem Footpeg Just at the base of the!
Naturally, there is no storage space under Seat, etc
I thought about using touring net when I was trying to load up a few things, but Loading Hook is missing
And I arrived at this product To install it, just remove the license plate's bolt nut and replace it
It's a piece of cake in 10 minutes It's a relief
View detail
Slider replacement
I installed it because I thought it was lonely with the Stand Hook hole, a common 10 for the 6R note that this is an 8mm Stand Hook hole, not amm hole
Our Parts were scraped off when it fell over, but there was not a scratch on the Swing Arm I feel glad I installed it
View detail
I am useful.
SEROW's Adventure Carrier's Frame is too fat,
Net or code hook is not applied.
OEM Product is so expensive that it's OK with that.
View detail
No damage when attached
I had attached Silver so far, I replaced it to Black according to the color of Body.
Originally it is a modest Size, but it makes me feel less noticeable by making it Black.
M8 × 30 mm Bolt is attached, but in the case of YAMAHA BOLT Shoulder Bag, Length is not enough for 30 mm.
It is recommended for those who do not want to add Saddlebag.
View detail