Reviews
Used as anchor bolt for REBEL250
It was used as an anchor bolt for REBEL250.
Recent Motorcycle has no Loading Hook because of CostCut.
It will be installed as a retrofit, but the car-specific products are quite expensive,
We think it is a good idea to use such a Universal Product.
This product comes with a 30mm Bolt, but with a slightly shorter exit allowance,
A separate 35mm Bolt will provide the same amount of output as the OEMBolt.
(Even Bolt with "Included Parts:" can be used as long as it is firmly tightened.)
One note on installation.
For OEMBolt, after removing one part, temporarily fasten this product and then remove the next part.
If you remove the Bolt holes in two places at the same time, the Bolt holes will shift, making it difficult to install and licking the Screw holes.
Also, the OEMBolt is tightened at a ridiculously high Torque, so it is hard to loosen the Bolt.
If you find it difficult, you should honestly ask Shop for help.
View detail
Mounted on KTM 250 ADVENTURE
Replaced with Inner fixed Bolt by Tail Cowl.
Since the KTM 250 ADVENTURE does not have any kind of Loader Hook, we will use the MOTOFIZZPlate hook3 and the DAYTONATouring hook as a loader point to be used together.
The 25?Cap bolt that came with it was usable as is with no length issues.
View detail
PoshNet Anchor
I bought it because I like the color. The paint has not peeled off so far. View detail
Good product
good point
The body is aluminum and light.
I've been doing well, and I've never missed a hook on the touring net.
A bad point
None.
View detail
It looks better now!
Glad I replaced it with a beautiful Gold that looks and feels more classy!
The only thing is that there is no drill for this kind of parts.
View detail
"Use for other purposes." (Never copy.) (Never try to copy.)
[How is it used?
MONKEY125. "SeatMounting Bolt Hole." I used it to block the
Was the one you received as per Image?
glance "Plastic?" I thought it was a Material:It is Camouflage that the processing of Anodized looks like plastic.
Was the installation difficult?
"M8Stainless screw" So, the NORMALMounting Bolt and "It doesn't feel like it's tightening up." It is necessary to pay attention in
After installing this product "NORMALMounting Bolt" You should think that you will not be able to get
How was your experience with it?
It's just like the picture, but in a more personal way. "We've achieved our goal. I think
[Included Parts:were they on?
None
[Was there anything that disappointed you?
"Noncompliant and self-imposed." So, no.
[Notes]
This product "Loading Hook for Expansion." This is the first time that the Company has been able to do so.
natural "Pon attachment" This is not the case. It is necessary to measure the dimensions of each part and devise a way to install it.
"Use for other purposes." So, "Ingenious." We don't describe the following information, and please be careful not to imitate the installation & operation, because it is all your own responsibility.
View detail
Nice touch!
I bought it as a Loader Hook for the front side of the MT-09.
Originally, Loader Hook is attached to Tandem Footpeg, but there is no Loader Hook because Tandem Footpeg has been removed.
I found a place where I could install Loader Hook, so I put it here.
I got a good deal on the cord as well.
View detail
Parenthesis looking good
PointI was close to the expiration date, and I had been wanting it for some time, so I took the plunge and bought it
I like it because it matches the color of my motorcycle However, I wish there was a plastic washer on the mounting part of the motorcycle to prevent scratches I thought
View detail
Beautiful
I have them on all my motorcycles, Defferential Gear Because the Volt in the faux is rusty and dirty
I haven't used it as a Hook, but I like it because of the texture
View detail
5 stars
Z1000 ABS 2017 Model has a Loading Hook with Tandem Footpeg Just at the base of the!
Naturally, there is no storage space under Seat, etc
I thought about using touring net when I was trying to load up a few things, but Loading Hook is missing
And I arrived at this product To install it, just remove the license plate's bolt nut and replace it
It's a piece of cake in 10 minutes It's a relief
View detail
No damage when attached
I had attached Silver so far, I replaced it to Black according to the color of Body.
Originally it is a modest Size, but it makes me feel less noticeable by making it Black.
M8 × 30 mm Bolt is attached, but in the case of YAMAHA BOLT Shoulder Bag, Length is not enough for 30 mm.
It is recommended for those who do not want to add Saddlebag.
View detail
Klx, dTRACKER 125
The Rear Fender of klx, dTRACKER 125 has rigidity because it contains iron Frame, and if you replace the installation Bolt of License Plate with this Hook, baggage will be loaded even without Carrier. It is recommended not to be heavy. View detail
Texture is good!
Because of resin Tank with a lot of curved surface, Tank Bag is hard to use, I use it for Loading Hook of MONSTER S2796.
I liked the design of Tandem Sheet Cover and I did not want to remove it, but this one is attachable without removing Cover, and it is useful as an emergency use when the package has increased at the destination.
I do not feel uncomfortable in appearance, I think that I will not mind even if I leave it on.
If you put the baggage in the same way, it is safe to use a non-slip Seat so that it will not slip off and slip off.
View detail
[Webike Monitor] It uses exchanging for the Bolt of the Number plate. Since it did not see easily locally, he bought a NASA type net anchor. POSH likes a product of this sort. It seems that there is no spare time which the other
[Webike Monitor] It uses exchanging for the Bolt of the
Number plate.
Since it did not see easily locally, he bought a
NASA type net anchor.
POSH likes a product of this sort.
It seems that there is no spare time which the other company takes advantage of.
I think that you may stick also to the place which does not need to hook the
Net by playfulness.
View detail
Since the Hook which fixes a Touring net etc. is insufficient on the outskirts of rear ones of Ninja250R, it purchases. Since mounting instruction is only exchanged for the Bolt which is fixing the Number plate, it is very easy. Although g
Since the Hook which fixes a Touring net etc. is insufficient on the outskirts of rear ones of Ninja250R, it purchases.
Since
mounting instruction is only exchanged for the Bolt which is fixing the Number plate, it is very easy.
Although
goods purchased red, a color is becoming thin by degradation now when it uses in several years.
As a result of attaching this product, it came to be able to perform fixation of a Tandem-step portion, a pure rear Hook Number-plate portion, and a total of six Touring nets.
Since the
load is stabilized and can be fixed, it is large satisfaction!
View detail
Since the Fender less was used and the authentic positive Hook was lost, it purchased. It attaches to the Number plate. It is also a little Accessories.
Since the Fender less was used and the
authentic positive Hook was lost, it purchased.
It attaches to the
Number plate.
It is also a little Accessories.
View detail
It attached to the drag star 400 and the zeal 250. The direction of zeal was attached to the location of the attachment bolt of suspension although the drag star was attached to the location of the hook for original loads. Load hooks increased in
It attached to the drag star 400 and the zeal 250.
The direction of zeal was attached to the location of the attachment bolt of suspension although the drag star was attached to the location of the hook for original loads.
Load hooks increased in number and it became very convenient.
Since it is made to almost all naked motorcycles, this way of attaching is very recommended.
View detail
Since a seat bag was fixed, he bought it. It has attached to the rear suspension upper of a zephyr 1100. If there is even a tool, attachment will not take 5 minutes. But it is very convenient. Although he bought the seat bag of the rough a
Since a seat bag was fixed, he bought it.
It has attached to the rear suspension upper of a zephyr 1100.
If there is even a tool, attachment will not take 5 minutes.
But it is very convenient.
Although he bought the seat bag of the rough and road simultaneously, it is simply and certainly fixable.
^^. If a rear suspension portion is used again, since the rubber of a bag comes to the distant location, there are also no worries about a wound from a car body.
^^. Highest! Does it worry, when the muffler of the up type is used and muffler stay is attached to the rear suspension upper, although it is what?
^^;. The one who is using the KERKER pipe is - which is a five stars perfectly ^^
View detail