Reviews
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Performance as expected.
The OEM Handlebar of the Z900RS does not need such a Mount Bracket bar, but a separate handle, etc,
This is necessary when the product becomes an Other Brand Product, such as when the handlebar is replaced.
If it is installed as shown in the photo, it is too close to the Tank, so it is better to install it in the opposite direction from the photo.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
this one option
Without much choice, this will be the one.
HolderQuantity:2pc. It is so long and convenient that USB is also attached to the Set.
It is being used with SP CONECTO and DAYTONA USB-A.
View detail
Fits: YAMAHA YZF-R25, KAWASAKI Ninja 400 (2014-), KAWASAKI Ninja 250, KAWASAKI Z900RS, YAMAHA MT-09, YAMAHA YZF-R3, KAWASAKI Z900RS, YAMAHA MT-09, YAMAHA YZF-R3
Interference between meters and smartphone navigation is eliminated and eye movement is reduced, making it more comfortable.
I use a Smartphone for navigation. In the past, the Holder was attached to the Handlebar by touch, but when the screen was positioned for easy viewing, it inevitably overlapped with the Meter. By attaching this product to the Mirror Hall, I was able to adjust both the Meter and the screen to a position that was easy to see, and by reducing the amount of eye movement, I think it has contributed to improved safety. The product did not rattle when driving on paved surfaces, and the bolts did not loosen, but just to be safe, we used screw locks to prevent them from loosening after the location was decided. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
I can't wait to use it in Touring.
[How is it used?
Mainly to attach a Smartphone Holder for navigation when touring. In the future, we plan to attach a go PRO and a power supply.
Was the one you received as per Image?
Stable as per Image.
How was your experience with it?
I haven't run it yet, but it is easy to see and Firmly fixed in the middle.
Previously, it was attached directly to the handlebar, so it was difficult to adjust the angle, but now it is easy to adjust.
[Points to note]
Since it is attached with a Handlebar Fixing Screw, it is basic but important to tighten the Screw from the front and to lay down a Towel to prevent the Tank from getting Wound during the work. It is not difficult if you have the right tools.
How did it compare to other products?
Not compared to other companies, but the longer width makes it easier to use.
Incidentally, the Smartphone Holder is made by DAYTONA.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Installation is easy
There is nothing difficult about the installation.
Before the work, the tank is cured with a thick toweletc. to prevent wounds.
(It's just a small step to avoid the extra time, effort, and expense.)
1.Temporarily assemble the Mount Bar and Mount Bracket.
2.BoltQuantity near the tank of the Handlebar Holder:Remove 2pcs.
3.Assembled the collar, temporarily assembled Mount Bar + Mount Bracket, Flat Washer, and M8x45Cap bolt to the car body in this order.
4.Temporarily tighten Bolt on each part
5.Bolt tightening in each part
This completes the process, but there is one point to note.
Tightening torque for M8x45 cap bolt. The specified tightening torque in the Instruction Manual for the product is 30 N・m, and the same value is given in the Service Manual. However, do not tighten the bolt all at once, but tighten it while observing the situation.
The tank-side joint surface of the upper handlebar holder has a gap with the tank-side joint surface of the lower holder. Since the upper holder is cast aluminum, it may break when tightened in overtorque.
The appropriate tightening torque varies depending on the bolt material, strength, material to be fastened, required fastening force (axial force), etc. Of course, there are standard tightening torques. Of course, there is a standard torque for fastening.
Since this is an important part of the steering, we recommend the use of proper fastening tools and not relying on intuition as much as possible.
The same situation may not apply to other vehicles of the same model and year.
To be sure, we checked the torque of the Handlebar Holder Fixing Bolt on the actual vehicle before disassembling.
All four were 20 N・m without lubrication. The target for Torque tightening was 20 Nm.
In the photo, both the cap bolt and button cap bolt are black.
This is because we changed the color when we changed to the same material as the OEM Handlebar Holder Fixed Bolt.
The OEM Bolt is SCM435 (10.9T) trivalent ChromateWhite.
The Bolt in the photo is SCM435 (10.9T) trivalent ChromateBlack.
View detail
Fits: YAMAHA YZF-R25, KAWASAKI Ninja 250, KAWASAKI Ninja 400 (2014-), KAWASAKI Z900RS, YAMAHA MT-09, YAMAHA YZF-R3, KAWASAKI Z900RS, YAMAHA MT-09, YAMAHA YZF-R3
Color and shape are both GOOD!
NINJA2 Helmet50R (Kawasaki Ninja series) is the best part of Parenthesis.
The top bridge and meter area are cut out.
I didn't want to hide it with Mount Bracket or my phone.
In addition to the Top Bridge, it can be attached to the side of the Separate Handle.
I was looking for something like the Short Bar and found this one.
I wanted to unify the Handlebar area with Red, so it was nice to have the Red color option.
I installed the ETC sensor (?) at the clutch lever. I tightened it to the bracket where the ETC sensor (?) is installed.
It was difficult to adjust the angle.
The first time I cut the Handlebar all the way to the Right with the phone attached, I damaged the Screen.
I was careless.
View detail
Fits: YAMAHA YZF-R25, KAWASAKI Ninja 250, KAWASAKI Ninja 400 (2014-), KAWASAKI Z900RS, YAMAHA MT-09, YAMAHA YZF-R3, KAWASAKI Z900RS, YAMAHA MT-09, YAMAHA YZF-R3
When attaching a Bracket to a Motorcycle with a Separate handle
[How is it used?
Used to mount the Smartphone Mount on the Separate Handlebars of Ninja 400.
Was the installation difficult?
On the Ninja 400, there is an unused screw hole in the clutch lever that can be fitted in a matter of seconds if you have a Hexagonal Wrench.
How was your experience with it?
This is the only bracket that requires a screw hole conversion adapter.
I think it is good to be able to choose your favorite color because there is a color development.
[Was there anything that disappointed you?
The Handlebar area is a bit cluttered, as is the rest of the Bracket and the Multi Bar, and it's quite noticeable when you're trying to mount your phone from the Bracket.
View detail
Fits: YAMAHA YZF-R25, KAWASAKI Ninja 400 (2014-), KAWASAKI Ninja 250, KAWASAKI Z900RS, YAMAHA MT-09, YAMAHA YZF-R3, KAWASAKI Z900RS, YAMAHA MT-09, YAMAHA YZF-R3
Mmm.
I put it on my current NINJA400, but the angle is not level because it is installed in the mirror hall of Handlebar, and the inside is facing up, so when I install a smartphone or Beeline Moto, the screen is facing outward and I can't see it unless I look into it. The design and color are good, but from a functional standpoint, I'm not happy with it. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Very good!
Installation is easy
The texture is not bad either.
If the phone is mounted in the middle, it will be in the way when inserting the Gasoline. (Lol)
As long as the phone is on its side, I don't see a problem...
Overall, I'm satisfied.
View detail
Fits: YAMAHA YZF-R25, KAWASAKI Ninja 400 (2014-), KAWASAKI Ninja 250, KAWASAKI Z900RS, YAMAHA MT-09, YAMAHA YZF-R3, KAWASAKI Z900RS, YAMAHA MT-09, YAMAHA YZF-R3
for little things
I chose this product to add to my Handlebar Par because I couldn't add anything else to it.
I love the size and the shape!
View detail
Fits: YAMAHA YZF-R25, KAWASAKI Ninja 250, KAWASAKI Ninja 400 (2014-), KAWASAKI Z900RS, YAMAHA MT-09, YAMAHA YZF-R3, KAWASAKI Z900RS, YAMAHA MT-09, YAMAHA YZF-R3
The texture is rather good.
I bought this to fix my Smartphone Holder to my Motorcycle.
Functionality
The Bracket is basically used in conjunction with the Mirror to hold the Smartphone Holder in place.
It is very rigid and can fix the phone holder very firmly. If the bracket is too soft, the screen will be blurred, so it's a very important point. However, the angle of the bracket is twisted so that the round bar is at a good angle, but depending on the angle of the handlebar on the car body, the round bar is not level.
■ Design
Round bars are Material:The color can be selected by Aluminum, so it is easy to match with the body color.
The Bracket part is made of steel, but it is finished with thick black paint, so it blends in with Mirror mount & Switch box without any sense of discomfort.
General Comment
The angle of the bracket can be adjusted by the user, but this is not an option. I'm not sure how much rust resistance it has because the bracket is made of iron.
If you have a cowl car, etc., if there is a place where you can fix something near the meter, you can install the smartphone in a place where there is little eye movement, which is ideal.
View detail
Fits: YAMAHA YZF-R25, KAWASAKI Ninja 400 (2014-), KAWASAKI Ninja 250, KAWASAKI Z900RS, YAMAHA MT-09, YAMAHA YZF-R3, KAWASAKI Z900RS, YAMAHA MT-09, YAMAHA YZF-R3
It's not quite what I imagined it would be.
BANDIT250 (gj74a) The LeftMirror installation part is made for the smartphone holder.
Overall, it's good, but the angle of the bracket part is shallower than I expected and it's a pain to install.
It's only a personal installation issue, so I'm not too concerned about it.
The car is currently sitting at home as it was scrapped in an accident.
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
Well, I guess it's okay.
I put it on for now.
The installation accuracy is no problem because it is only for the car type.
As for the position, I think it would have been better to be a little lower & more forward. Well, this is my personal feeling, so it may not be helpful.
Looking at the pictures after installation, I thought if I put it backwards and forwards, it might be to my liking … I'm not sure. So I'll try it next time.
Installation time is 5 minutes. If you can't do this, it's so easy that it's better to leave it all to the Shop.
View detail
Fits: YAMAHA YZF-R25, KAWASAKI Ninja 250, KAWASAKI Ninja 400 (2014-), KAWASAKI Z900RS, YAMAHA MT-09, YAMAHA YZF-R3, KAWASAKI Z900RS, YAMAHA MT-09, YAMAHA YZF-R3
I love the mounting position
I didn't need a large Base because I only needed to be able to install a cell phone, and the front I chose this product because I wanted to avoid anything that comes in
The screw holes for mounting the Mirror are used to attach it, so it will be mounted in a good way It's a good thing that it's in a position where it's easy to get a DC power supply
If you use the Screw stopper at each place, there is no need to be scared when driving if you tighten it firmly 。
Generally good
View detail
Fits: YAMAHA YZF-R25, KAWASAKI Ninja 400 (2014-), KAWASAKI Ninja 250, KAWASAKI Z900RS, YAMAHA MT-09, YAMAHA YZF-R3, KAWASAKI Z900RS, YAMAHA MT-09, YAMAHA YZF-R3
The bolts that come with it are easily rusted
I am satisfied with the installation and shape
However, I recommend you to buy SUSBlack because the included Bolt washer is easily rusted Recommendation
View detail