Reviews
Prevention of License Plate cracking
The rim and claws are attached to hold the License Plate in place. View detail
LED Conversion of Old Motorcycle
The old Filament bulbs were replaced with LEDs. I would like to see a newer design, but I guess that's impossible because of the age of the car. The installation is easy and I am generally satisfied. I am dissatisfied with the high price.
The image is when Brake is lit.
View detail
Useful for relocation of Rear blinker
[How is it used?
I bought this for fixing the Rear blinker on my XJR400R.
We chose this product because the blinker was made by the same Posh face and had a 10mm hole diameter, and because of the price.
Was the one you received as per Image?
It was just like the picture.
Was the installation difficult?
It is easy to fix through Blinker's Wiring and then co-tighten with License Plate's Bolt.
Hole location and hole diameter were no problem at all.
How was your experience with it?
We were able to fix the Blinker in the targeted position without interference.
Steel, so there is a slight increase in weight, but not enough to be a concern.
I am satisfied with the price.
[Included Parts:were they on?
Bracket Only.
Depending on the installation method, the Bolt given at the DMV may be too short.
[Was there anything that disappointed you?
Not particularly
【Review】
These are convenient items that can be used to easily relocate the Blinker.
It is useful when you are not sure about the position of the Rear blinker, but be careful about the thickness and weight increase since it tends to be co-tightened with the number of methenometers such as the Drareco, Loading Hook, Reflectoretc.
View detail
Fits: HONDA solo, HONDA ZOOMER(Ruckus), HONDA SMART DIO-Z4, HONDA CREA SCOOPY, HONDA Bite
For carburetor for CBR150R.
It is out of the scope of conformity, but was used on a CBR150ROEMcarburetor.
We are using a CBR150Rcarburetor on a MAJESTY125, but I don't think many people do this, so I hope CBR150RUser can use it as a reference.
Posh's Jet is very accurate and can be used with confidence.
View detail
Posh Face Machined License Plate Holder
I installed it on my first Motorcycle and the License Plate area looked tighter, so I bought it to install on my second Motorcycle. I think the cost performance is good. View detail
Suitable for many car models, comes with mounting brackets. clear sound View detail
It's bigger than I thought
There are also high-priced Knn filters, The posh is well made for the price. It's satisfying. I'm planning to buy it again next time. View detail
MONKEY125 pica.
I was using 4 Posh round reflectors on the front and rear of my MONKEY125, when suddenly 1pc. of the rear fell off and was lost. View detail
I thought it would go well with my old motorcycle.
[How is it used?
I was looking for a cap bolt with FUJI TSUBO Type color to replace the bolt for fixing the exterior of my SV650X, which has a delicate design and may or may not be a Neoclassical. I found this product and bought it.
Did you receive the item as per the Image?
This is a design that was the standard for this kind of aluminum spacer a long time ago. FUJI TUBO type. I thought it would be suitable for Motorcycle and Neo-Class cars of a while ago because of its highly universal nature with its uneven design, and the product was just as I imagined.
Was it difficult to install?
There is nothing difficult about this product, as it is installed by biting it in place of a washer when using a cap bolt.
How did you like it?
It's not a functional component. Power up!" Ya Fuel Efficiency! It is a product that does not have any effect on etc., only a slight change in appearance&Washer substitute.
Since it is made of aluminum material, each piece is light in weight and can also serve as a washer, making it a very convenient product that can be used in a wide range of applications.
One point can be used to add an "Accent" when installing the License Plate, which is not so easy to do with BoltSingle Body.
There is no effect of weight reduction, reinforcement, etc. (Strictly speaking, there is a slight increase for color.) I like this kind of products, but I appreciate it very much.
It may not be suitable for the newest model of sports type motorbike, but for the previous generation of Motorcycle and Neoclass etc.... "Chooey old." I think it will help to create a sense of
Was "Included Parts:" attached?
None
I purchased the "Titaniumium color" In Quantity:The price per set of 4pcs. is 1,734 yen, and the unit price per pc. is 433 yen. The price seems to go up and down slightly depending on the color, but it would be even better if the price were a little lower.
Were there any disappointments?
Not particularly
There are Anodized dyed products. The color of the image is different from the color of the actual product. If you are concerned about this, it might be better to check the actual product at a Motorcycle accessory store before ordering.
Make good use of the wide selection of 12 colors to add flair to the Accent of your car body.
Other items that would be helpful
Point and hang of installation
As mentioned above, it is like a fashion color used in place of a bolt washer, so it is a simple job to use the Barnacle Collar when attaching a cap bolt of the appropriate length to the bolt stop on the attachable part.
[Availability and clarity of the Instruction Manual
No Instruction Manual is available
I am sure it will be Large sturdy as it just needs to be used as described above.
[Notes]
Continued exposure to UV rays for long periods of time will cause the color to fade. (The same goes for the exterior of a motorcycle.) When not riding, protect them from UV rays with UV Cut Body Cover or Garage Storage.
[ITEMS TO BUY TOGETHER
Cap boltTypeExclusive Since it is like a collar, prepare a cap bolt of each material& length that you want to install.
[Opinions and requests to Manufacturer
Quantity:1 Set of 10pcs. is 10% cheaper or Quantity:It would be even more appreciated if there is a discount for purchasing large quantities, such as 20% discount for 1 set of 20pcs.
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SB
It is easy to install.
I'm not sure about the color!
The texture of the product and such is very good.
However, if the front sprocket is not OEM, the sound might be bothersome.
View detail
Handlebar cutting angle is less than otherManufacturer!
It works very well with the combination of Aluminum Tank + Separate handle. The Handlebar Stopper has a smaller handlebar cutting angle than other manufacturers' handlebar stoppers, so the handlebar can be narrowed down considerably. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI ZX-25R
Use the outer perimeter of the DISC neatly.
It is for Z900RS but I used it for Ninja 1000.
Double disk is Quantity:2 Sets, 4 in total are required.
SUNSTARPremiumRACINGdisc, RKMega Alloy XPad, and Normal caliper.
DISC is 300?, the same as NORMAL, but with a little extra circumference.
1.5mmOffset allows Pad to be applied without excess.
Brake's performance is thermal capacity, so there is no such thing as increased performance. It just eliminates the excess.
To install, remove the NORMAL Knock Pin. Insert the unused Bolt and rotate it between the pliers to remove it.
Once the Knock Pin is removed, install this product and put Caliper back in and you are done. It is very easy.
The material is machined aluminum, so the price is a little high, but it is a product that will satisfy your needs.
View detail
A little pricey
I bought it because I wanted to immeChain it, and I think the price is a little high for just the Outer Cover. View detail
Fits: HONDA Universal, SUZUKI Universal, KAWASAKI Universal, YAMAHA Universal
Very good.
[How is it used?
I was looking for a blinker for my XJR400R. OEM blinkers are too fussy and Chinese blinkers are too small, so I finally found this product.
Since I was not particular about the type, I chose Orange for the Lens with the safe BodyColor black.
There is a special product for XJR400R by Universal, but the price is quite different. (Double Bulb) 、Rear12V23-8W (Single Bulb) So I bought this one of Universal Type.
Was the one you received as per Image?
Unlike the Chinese-made Plastic, it is made of Steel, which gives it a heavy feel.
Included Parts:were all in order with no problems.
Was the installation difficult?
First of all, it is a bit troublesome to put Blinker's Wiring through the attached Bolt.
It's a tough job, but if you work hard, you can get through three lines, so you have to be strong.
The front part can be fixed by simply attaching the front panel as is.
For some reason, the Fender side of the Rear was modified on my vehicle, so I installed it on a Number co-tightened Bracket.
The wiring was as shown in the Wiring Connection List in the included Instruction Manual, and the light came on without any problems.
How was your experience with it?
I am satisfied with the installation, which feels quite SMART.
The included bulbs are also bright and quite visible.
[Included Parts:were they on?
The photo Included Parts:was attached.
[Was there anything that disappointed you?
If I may say so, it would be nice if Bolt for fixing was attached from the beginning.
It's not so much a Point to be Minus as it is a Point to be Minus, so it's not so much a disappointment.
【Review】
The light intensity and visibility are sufficient.
After all, a used OEM or Chinese one costs several thousand yen, so it's safe to say that you should pay a little more then to buy a definite one.
View detail
Fits: YAMAHA MT-25, KTM RC250, KTM RC390, KTM DUKE250, KTM DUKE390, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA NMAX
Excellent anti-vibration effect
[How is it used?
The KTM390DUKE is a high-revving single-cylinder engine, so vibration is strong in its own way, and even the OEM has a heavy bar end, but the vibration of the handlebar is still a bothersome Level, so we decided to use this product as a further vibration countermeasure.
Was the one you received as per Image?
It is a different Orange color from KTMOrange; it is a Reddish Orange color. Only when viewed under direct sunlight, it finally looks the same shade as KTMOrange.
Was the installation difficult?
However, the inside of the Bar End was in contact with the Throttle and could not rotate smoothly, so the Throttle housing was moved 5mm toward the center of the Handlebar to prevent the Bar End from contacting the Throttle. In order to shift the Throttle housing, the locating hole that holds the housing to the Handlebar needs to be machined in an ellipse, as described in the Instruction Manual, Screw lock fluid was used to prevent loosening of the M6 Bolt for Bar End mounting.
How was your experience with it?
It is heavier than the OEM Bar End, and the vibration is much less bothersome. My hands do not get numb even after long hours of riding.
[Included Parts:were they on?
Spacer is included in the kit, which is used for mounting on a Yamaha car.
[Was there anything that disappointed you?
What is the purpose of the recess on the inside of the Bar End, it would be very convenient if the Spacer could be used inside out. The Webig product page includes 390DUKE in the list of compatible vehicles, but there must be some mistake.
Other items that would be helpful
Installation point or hang:This Bar End is quite heavy, so be careful not to drop it while working.
Availability and clarity of Instruction Manual:An easy-to-understand Instruction Manual with diagrams is included.
Items to buy together:Screw lock liquid
Opinion and request to Manufacturer:Please enlarge the diameter of the recess inside the Bar End so that the Spacer can be used even when it is turned inside out.
View detail
Good variety of Sizes.
I went to Home center first because it was hard to find this kind of product on webike, but I couldn't find one with the same shape as the OEM one, and the ones I could use were too cumbersome because they required some modification. I went to Home center first, but they had a hard time finding the same shape as the OEM one, and even if they did, it would require some modification, so I gave up. The product is the same shape as the OEM and the size is JUST right! The only thing is that the price is a little bit high. View detail
Position is a Large cut.
Used on JK05, a Conversion from JF28, no need to adjust the position of the SwitchHolder holes. However, there are no holes in the product, so you have to drill them yourself. It may be time-consuming.
The position is Flat, about 5cm lower than OEM, so that the Accelerator Wire does not hit the Cowl Limit.
It goes from a NORMAL American-like position to a Naked sports-like position.
I am 167cm and it feels like it lightly hits the SeatBack.
View detail
I wanted to make Mirror Refreshing.
I put it on my CRF250L and needed Spacer because the product is quite low! View detail
Fit for my CB
Fast shipping and good package. Black color and excellent quality and it fits with my Honda CB. It is comfortable to be riding in a long trip. Tested with 800km route. No problems. View detail
Recommended!
Recommended!
Custom feeling goes up!
View detail