Reviews
It was not good enough for me.
I bought it to protect my number, but it is too thin and unreliable, probably to make it lightweight. The size is exact and easy to install. The machining accuracy is not bad. View detail
Fits: SUZUKI GSR250, SUZUKI GSR400, SUZUKI GSX1400, SUZUKI GLADIUS650400, SUZUKI GSX-S1000F, SUZUKI SV650, SUZUKI V-STROAM250, SUZUKI BURGMAN400, SUZUKI V-STROAM, SUZUKI GSX-S1000S, SUZUKI GSX-S1000, SUZUKI GSX250R, SUZUKI GSX-S1000GT, SUZUKI V-STROAM1050, SUZUKI V-STROAM1050XT, SUZUKI V-STROAM1050DE, SUZUKI V-STROAM650, SUZUKI V-STROAM650XT
First time is tough.
If you are replacing the Bar End for the first time, be careful.
I guess it depends on the type of car, but in my case (2023 KATANA),
First, the Bolt that is included will not be used. Also, most of the included parts will not be used.
I use the OEM Bolt, but sadly it does not fit this Bar End.
I think it is a lack of understanding of the structure of the Bar End itself, but at first I used a part like the Adjuster that came with the Bar End without understanding it, and the Bar End did not come off.
We ended up taking it to a Motorcycle shop and decided to remove this Bar End.
Since the product photo does not show the attached parts, I will buy the actual product at the Shop in the future, even if it is a little more expensive, instead of using Webig.
View detail
Importance of in-place information
The product itself is fine. The color is also good, close to Fork.
I bought it without paying attention because everywhere I looked it said that 187mm was good or best for jc61etc. groms, etc. ….
With this length, the clamp can only be attached to the rounded part of the handlebar. It is possible to attach the clamp by forcibly tightening the screw. It is indeed a good parenthesis in terms of position.
Personally, I think that it would be better if the clamp and handlebar were mounted on the flat surfaces of each other, so that they are rigid and the handlebar is not damaged. I think this is a good idea.
It was an expensive study.
View detail
too big a hole
The hole drilled for the Switch box is a stupid hole and the Throttle moves back and forth.
I purchased the Plating type.
I have nothing but regret.
View detail
I am not into this License Plate.
Since it is not a flat shape but an enclosure, it may not fit slightly depending on the size of the License Plate.
We recommend that you carefully check the License PlateSize in your area and purchase the license plate.
View detail
Fits: その他 , その他 , その他 , その他 , その他 , SUZUKI GSX750S(GS75X), SUZUKI GSX1100S, SUZUKI GSX750S(GS75X), SUZUKI GSX1100S
...?
This purchase was for adjustment due to changes in the intake and exhaust.
To be honest, the spacing between positions is too Large.
If they were spaced 1 or 2.5 positions apart instead of 5 positions apart, I could make the right adjustments...
If there is no setting, the only way is to adjust with what is available, so we found a compromise and set it up, even though some dissatisfaction remained.
For those who cannot compromise, we recommend replacing the Carburetor Body.
View detail
It interferes with the Fender Eliminator and is unusable.
In the picture it looked like it was attached to a Fender Eliminator on a Z900RS, so I bought it thinking I could attach it without any problem.
However, in reality, as shown in the photo, the angles do not match and there is too much interference, making it unusable.
There are a wide variety of Fender Eliminators for the Z900RS, but mine is an Active product.
Active's Fender Eliminator differs from other Manufacturers in the number angle and the distance between the Lamp and Number.
I think it's because of the proximity. But Active's Fender Eliminator is the most beautiful because there are no weird gaps.
I'm not sure if I should return it.
If you are a Fender Eliminator and the Lamp and License Plate are close to each other, please be careful.
View detail
Blinkers that could not be assembled were mixed in.
I bought this Blinker because I wanted to make my Z900RS Blinker look like an old car. I have already applied for a replacement on webike, but I have not heard from them for about a week now. I am very happy with the product, I like the look of the product, and I was very happy with how quickly it arrived. View detail
Exhaust pressure is important.
I used to wear it.
I wanted the sound, the look … cheaper than other companies, Stainless Steel, and a beautiful shape.
However, I have had the experience to realize that exhaust pipes are very important parts.
good point
Lower cost than other companies.
●Stainless steel allows for weight reduction.
Silencer's original sound can be produced.
A bad point
TorqueDown is severe.
The normal exhaust pipe is intentionally thickened to muffle sound and control exhaust pressure.
It will look better, but I think NORMAL is the way to go for the exhaust pipe unless you are doing an EngineBore up or something.
View detail
Fits: YAMAHA XT250 CELLOW, YAMAHA XT250, YAMAHA Tricker 250, YAMAHA TT250R, YAMAHA TT250R
No adjustment
Purchased for use with SEROW250
I could not use Included Parts:because it starts at 145 while NORMAL is 135.
I should have done my homework and bought it.
I ran with 145 in it at one point and it was no fluke.
Is it for direct carburetor?
View detail
poor quality
I buy this product for my bike Zx-25R, but the quality is very unsatisfactory, not working, if you want but this product, i suggest you think frist that buy View detail
Don’t fit Z900rs
These are well made but do not fit the Z900rs. The connections of the turn signals on the Z900rs are different. High quality but wrong connection terminals. View detail
It rusts.
This is to fix the Blinker to the Pipe of Front forketc.Φ30-Φ39
2,160 yen with the intention of buying credit.
I was able to use it normally without any difficulty in installation.
But unfortunately, if you install it as it is, it will rust quite loudly.
The front fork will move and rust, so it is best to install a rubber or film between the fork and clamp.
To be honest, the processing and texture is no different than a SteelBracket from a certain large hand mail order site that costs around $500.
View detail
I bought it for GSX400.
I bought one for GSX400 to install on GSX400Second Type Model.
I paid 14,000 yen because I thought it was common to all the car models because there was no detailed description of the fitment, but as a result, it cannot be installed!
When I tried to install this product, it was too hard and it didn't fit well.
It just ended up damaging the NORMAL Top bolt and I want to return it.
View detail
It may be due to individual differences, but the size is not right.
Purchased for Number protection for light motorcycles.
The product itself is just a product to fit and protect the license plate, so it's not so bad, but our light motorcycle Number did not fit.
I don't know if it's the individual difference of the gold mold or the uneven paint, but anyway it's too small. I pushed it in, but it was still floating 1-2mm.
The role of the protection seems to be able to be fulfilled somehow, and it is troublesome to have it exchanged, so it is left as it is, but the quality is a little? I have to say.
View detail
Fits: KAWASAKI W650, KAWASAKI W400, KAWASAKI W650, KAWASAKI W400
Mr. Webig, you can`t fit a W800!
First of all, I think the build, setting and Ideas are good.
I think this is a typical Posh product.
The problem is that it will not fit the W800. If you are considering to buy this product for W800, please be careful.
Although it has become W800 installation conformity in the product Page of Uebig and the Page of other companies UebigShop, the product itself and the HP of Posh are not specified as W800, and I think that it is probably a mistake of Uebig.
In the first place, the shape of the footpeg of both W400 and W650 and that of W800 are completely different, and I thought that it was possible to install it because it was suitable at first, and after purchasing it, I did it variously, but the shape is completely different in the instruction manual of Mr. Posh, and it is a method to hang it on the installation position of the footpeg shape assumption of the image.
Although I struggled for two hours, I judged that it was impossible to install because the shape of the part, the installation position of the footpeg, and the setting position of the spring were completely different.
I wondered what Uebig's basis for conformity was...
Even if it is made by Posh, I think that the diversion of the SpringUniversal part of Home center will be the only way because there is only a model number setting here.
I guess it's my fault for trusting them, but I'm really disappointed in Uebig's lax product information.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000S KATANA, SUZUKI GSX250R, SUZUKI SV650, SUZUKI V-STROAM, SUZUKI V-STROAM250, SUZUKI GSR250, SUZUKI GSR400, SUZUKI GSX1400, SUZUKI GLADIUS650400, SUZUKI BURGMAN400
Plating will be peeled off
I was satisfied with the plating right after I bought it, but the plating peeled off badly after one year of installation. The car is stored in a covered garage and is only exposed to wind and rain during long distance touring, so I think the durability is inferior.
I chose the Plating product because the Anodized will fade in a few years, but I didn't expect it to be this good in a year.
View detail
It's broken
It broke during installation.
No more intensity than OEM Product
View detail
ZEPHYR750.Posh faceInitial Adjuster
We had the installation etc. done the other day.
Immediately after the replacement, there was an oil leak from the front cap, and the cause was confirmed to be the O-ring.
View detail
inferior goods
It's a shoddy product; I don't think it's a product sold by webike. I'm not sure if this is a good product or a bad one.
Isn't that a Bosch pastiche?
POSH Faith:Posh Face
FOR JAPAN MODELThe best comprehensive PartsManufacturerPOSH.
It is hard to believe that it is a product of the comprehensive PartsManufacturer of the highest peak FOR JAPAN MODEL.
At first I thought it was a Bosch, but when it arrived I was surprised! I didn't think Webike would sell such an inferior product. I've known Webike for a long time, so I feel completely betrayed. I'm seriously thinking of posting this on social media to prevent others from feeling the same discomfort. Of course I will give Webike's name. I can't even return the product because I had to replace it due to different terminal shape. I don't want to pay Gold for such a product. The bulb was decent, so I will pay. Please give me an invoice for the bulb only.
View detail