Reviews
Got my moneys worth for the look alone
I'd wanted the black one, but as it wasn't available- I got titanium instead...it actually looks really good to my eye. The design of the shroud does restrict access to the front mounting point for crash knobs etc- in particular the right hand side. I had to remove my 'trickstar' sliders so the shroud would fit. As for an improvement to airflow around the radiator, I got no idea..sometimes I could almost swear the engine runs hotter- so, who knows? But all that aside, I think they are well worth the money even as just as "dress-up" item. View detail
To bundle Accelerator Wire!
It is perfect for bundling Accelerator wire. They are inexpensive and solid. View detail
Convenient to have
Cheap and durable!
Better than Home center Bracket!
View detail
Cheap and convenient.
[How is it used?
I bought a YOSHIMURA Oil Temperature Meter and wanted to mount it on a Handlebar Post with a Bracket, but I could not find an Exclusive Bracket from YOSHIMURA.
The price is quite high, about 3000 yen. I was looking for a Bracket that was close to the dimensions of the alternative and found this one.
Was the one you received as per Image?
It was just as Image.
The distance from the Bolt hole to the Bracket seemed a little long, but I guess it is easy to bend since some people bent it in another Review.
Was the installation difficult?
It's easy, just pass Bolt through.
How was your experience with it?
It is strong and solid, and so far we have had no problems.
I think this QUALITY is very good at this price.
View detail
Fits: HONDA FORZA(MF08), HONDA FORZA(MF08), HONDA FORZA(MF10), HONDA FORZA(MF10), YAMAHA SRX400, YAMAHA SRX600
Retro feeling in the air.
Installation is very easy, just replace the Oil gauge.
The Analog Oil Temperature Meter adds a nice touch.
View detail
Fits: HONDA FORZA(MF08), HONDA FORZA(MF08), HONDA FORZA(MF10), HONDA FORZA(MF10), YAMAHA SRX400, YAMAHA SRX600
Recommended
Purchased to go Touring in the summer
Oil management is a Large thing!
Refreshing to look at!
View detail
Simple and easy to use
Used to summarize Motorcycle's Wire.
It is easy to remove the hexagon and simply tighten it across the Wire and cords.
The relatively high price and the lack of a corporate logo, despite being made by POSH, make it a disappointing point that it does not have a dress-up effect.
In general, the product is easy to use and can be recommended.
View detail
Blowby gas can enter the Thermometer as it deteriorates
I purchased Repeat
The inside of the plastic lens has become dirty with blowby gas, so I disassembled it.
I managed to remove it and cleaned the inside of the Lens and the Meter panel and it was clean. However, I suspected that Gas was getting in through the bearings, so I bought Repeat.
If it does not suit, the Bronze portion may be transplanted.
The DAYTONA products we considered in comparison felt light to hold and seemed inexpensive to me personally, so we decided not to go with them.
View detail
For installation of Oil Temperature Meter
[How is it used?
I purchased an OpMid Oil Temperature Meter to install on my CYGNUS X Type 5.
By the way, OpMid's Oil Temperature Meter is PnPThermometer Y1 STDSeries The part numbers are M1007." It is
The BodySize of the Meter is BodySize:W57mm×H29mm×D10mm.
Was the one you received as per Image?
It is as shown in the Image. I thought it would be a good size for KOSO, OpMid's Oil Temperature Meter, and water temperature system.
Was the installation difficult?
On the CYGNUS, we installed the Mirror Adapter and the Mirror Adapter with the gap between the Mirror Adapter and the Mirror Adapter jointed and slightly bent.
Black color was chosen to make it as inconspicuous as possible.
Probably all the ones with collars will do so, so don't use force when bending them.
It is better to use Vise or otherwise bend it cleanly so that the force is not distributed.
How was your experience with it?
The size is Exactly, so it is comfortable to use, and it can be used for YOSHIMURA's smallest temp meter.
However, the Material:Because it is aluminum, there is a risk that it will break due to Gold fatigue if it is bent many times.
[Included Parts:were they on?
No, it is the relevant Bracket Only.
[Was there anything that disappointed you?
None in particular. If I may say so, it would be nice to have a lineup of brackets that are bent from the beginning.
View detail
Posh Oil Gauge
Really well made, great retro style oil gauge and looks superb on my SR400. I'd recommend these oil gauges to anyone looking for one. View detail
Bundle the Accelerator Wire.
One point is used to bind the Accelerator Wire. View detail
The mess Hose is in!
Refreshing the cluttered hose, and the material is good! View detail
I was able to buy it on Sale.
It just so happened that the one I wanted was on Sale.
You can bundle them tightly.
View detail
A little expensive, but I'm satisfied.
[How is it used?
busy
Was the one you received as per Image?
Street Image
Was the installation difficult?
Installation itself is easy, just replace the oil tank cap with the OEM one.
There is no Instruction Manual, so aligning the dial orientation was a bit of a hassle since I wasn't sure how to do it the first time and had to go by hand.
What does it mean that the Circlip is attached? When I thought about it, I figured out that if I remove the Circlip, the dial part will pull upward.
If you actually remove the Circlip and lift the Stick part from the bottom to the top, the whole dial will come off. The dial rotated when I lifted it to some extent and fixed the BodyBody and twisted the Stick part.
I had to check the direction of the dial of the Oil Temperature Meter, remove it from the car, adjust the direction of the dial, and then install it.
If you put a mark on the body with masking tape, you can do it in one shot.
When the direction of the dial becomes an acceptable range, if it fixes it with Circlip at the end, it becomes completion.
How was your experience with it?
The dial is small, but there is legibility that can be confirmed at a glance. There is a sense of luxury in the appearance only because it is expensive, and a sense of satisfaction is high.
It also includes a level gauge mark, so you don't have to take out the OEM product when you change the oil.
While there are various Oil Temperature Meter for SR from the more expensive one to the inexpensive one, such as the one which is filled with Oil in the Memory part, the reason why this was chosen became the decisive factor where there seemed to be heat radiation in the shape.
In fact, it is a degree of comfort because it has heat considerably, but I can think that the heat is dissipated a little by the fin engraved in the Body, and can be self-satisfied.
[Included Parts:were they on?
The Body, O-ring and Sticker were included.
View detail
The size is perfect.
It's a good choice for me because it comes with Rubber protector to prevent chattering sound. The size is perfect and the quality is high. View detail
Gap adjustment method guide for temperature display
It is the Gap of the temperature display, but if you remove the C-ring and push it from the back, it will pull out from the Cap part, so I was able to fix it again at the desired position. View detail
Less excessive temperature display.
After installation, the display angle was off, so I tried to adjust it by removing the C-ring, but it didn't turn at about 50 degrees Celsius, so I'll try to adjust it again when it warms up more. View detail
Wow that's cool
I bought it as a dress-up, I didn't have to make any corrections to the direction of the panel, and the hands didn't shake while I was driving, so it's very legible. I can't complain if it's a little cheaper, but it was a good purchase. View detail
It's a good fit for the SR400
Just put this Oil Temperature Meter on instead of the OEM Oil cap Meter is installed in a straight line as described in the product description You will need to use a special tool to adjust the position
I was expecting the hand of the Thermometer to be shaken by the vibration of the Engine, but it didn't even budge I could see the quality of production because I could see it as Drill
View detail
Sure enough, the Japanese brand is better
I have tried many domestic brands, and I feel that the accuracy just doesn't meet the requirements of myself and the technicians, so I still spend money to buy more expensive brands. The accuracy is amazing. Sometimes I really have to admire the quality of the Japanese. Perseverance, a good product that is expensive but quality is worth ten crudely crafted vulnerable products. I have tried many domestic brands, and I feel that the accuracy is not in line with the requirements of myself and the technicians. Therefore, I still have to pay for the brand of expensive goods. The accuracy is really amazing. Sometimes I really have to admire the quality of the Japanese. Perseverance, a good product that is expensive but has the quality left over ten vulnerable items.(translated by Google Translator) View detail