Reviews
Stable abalone
The way it glows is very Beauty.
Compared to OEMs, this should definitely be changed.
They just put it on. (Lol)
I would love to have a choice, but currently only in Lens colors.
View detail
Fits: KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI Ninja 250, KAWASAKI Ninja 400R (-2013), KAWASAKI ER-6f, KAWASAKI ER-4n
Easy
It is easy to install and very nice to be able to sequentialize easily. View detail
Good feeling
The Blinker light emitting part is covered by the Number, so I bought it to expand it outward.
Used for KOSO LED Blinker
It's a nice miscalculation to have a CinderellaFit that looks like it's made to measure, even though they are from different manufacturers.
Satisfied with no cheapness in the texture
View detail
For Dress-up
It is quite bright. Installation requires removal of the tail cowl, but it is not that difficult, so the difficulty level is not high.
The shape is the same as OEM, so Clearanceetc. had no problem.
View detail
Fits: HONDA NC700S, HONDA NC700X, HONDA integral, HONDA NC700S, HONDA NC700X, HONDA integral
value for money
After replacing the power supply plug, it can be installed on the NC750S Gen.1, and the quality of the entire vehicle is improved. Although the materials and workmanship are not as good as SP Wuchuan, the price is more reasonable and it is worth the money. It would be better if it has a blackened appearance and matches the original car turn signal. -------------------------------------------------- -------- After replacing the power supply plug, you can install it on the NC750S Gen.1, and the entire vehicle texture has improved. Although the workmanship is not as good as SP Wuchuan, the price is more reasonable than it, and it is worthwhile. If there is a better appearance, it is matched with the turning light of the original car. Powered by Google Translator View detail
LED Conversion of Old Motorcycle
The old Filament bulbs were replaced with LEDs. I would like to see a newer design, but I guess that's impossible because of the age of the car. The installation is easy and I am generally satisfied. I am dissatisfied with the high price.
The image is when Brake is lit.
View detail
Well, the Gold amount is acceptable.
Conversion Connector for Bosch wide watt blinker relay.
Convert 4 wires on the body side to Relay 3 wires.
My Motorcycle, a CBR650F, has 4 wires on the body side, so I needed this product to install a wide watt blinker relay.
The coupler shape is 4-wire, but as you can see inside, the wire itself is 3-wire (because the Relay is 3-wire). (Relay is 3-wire).
Therefore, Hazard will not be available when the key is Off.
The ICRelay fits in the place where the regular Relay fits, but since this product must be used in a way that it pops out from there, a great deal of ingenuity is required in the way it is delivered.
Gold price is a little over 500 yen, which is quite inexpensive considering the cost of the product. (It is common for this type of product to cost 1,500 yen just to connect the wiring and resistor, so this is cheap enough for a couplet-on).
View detail
Couplet-on for easy installation
Used on the last model of CB400SUPER BOLDOR.
The bulb Blinker was replaced with an LED Blinker as well.
The Relay position is under the Tank, so sound is not a concern.
Instead, the replacement process was Large strange.
Not directly related to Relay, but I want it to last as long as possible.
Wiring was too long to fit, so it was bent sideways and pushed in.
The OEM WaterproofRubber cover will be facing up or sideways so water can get in. This makes it a *−1.
It would be better if there is an OEM Type without Wiring.
In general, it is a good product.
View detail
Large change was saved by the SPIDI-like response.
I found this product on this site when my touring date was approaching. I am very pleased with the immediate delivery and the large size.
At first, we tried to place an order for the manufacturer's product through a motorcycle shop, but we were told that we would have to check the inventory and place the order at the end of the week.... I got only a carefree response like, "We'll check the stock and place the order in the week after tomorrow....
I am appalled at the totally outdated response.
This time I was satisfied with the Large change to this Site's Service.
View detail
Used for Super Cub custom
I made the right decision to purchase the ClassicalSeries as it is used for the SUPER CUB and I am using it with the LED Specification. View detail
Super Cub custom to LED BlinkerSpec.
SUPER CUB was not indicated in the compatibility chart, but it could be used with SUPER CUB, which was good. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Used to replace Blinker
I used it to replace the blinker on my z900rs. 2 in a pack so I ordered 2 for Front and 2 for Rear.
It would have been nice if Coupler was color coded like OEM.
View detail
POSH Faith LuminousLed Tail Lamp Unit
The Tail lamp from Musashi ran out of LEDs after 2 years, so this time it was made by POSH.
I chose the Smoked color and it was more than I expected. [Color] Smoke is thick and complete like Musashi in my opinion. [Color] I thought the Clear color was good.
Now we just need to know how durable it is….
View detail
Used to replace Blinker
I used it on my z900rs, but it can't be fixed in position like KIJIMA or DAYTONA, and the material is iron, so I would have preferred DAYTONA's aluminum or KIJIMA's resin, but they were out of stock, so I went with this one. View detail
Required for Blinker replacement
I replaced the Blinker with a WideWattRelay. I thought the price was a little high compared to other manufacturers, but the picture is an OEM comparison. View detail
Fits: HONDA CB400 SUPER FOUR, HONDA X11
If you don't want to process NORMAL, here it is.
Parts to enable OEMCoupler to make Bullet Terminal connections when changing to an external Blinker.
It's easy and convenient to get back to OEM.
View detail
Blinker to Position light
Blinker was purchased for use with Position lights as well.
Depending on how it was installed, it was not difficult.
View detail
Suitable for making Blinker Small Type
I installed Fender Eliminator Kit on Z900, but the OMBlinker is too large and not clean enough.
So, we decided to convert the BlinkerSmall Type to the BlinkerSmall Type and concluded that the best place to install the BlinkerSmall Type was by the License Plate.
At first I thought of bending a plate Universal Bracket, but I found this product at a store and chose it because it was not expensive and it was easier than going through the trouble of processing it myself.
I am satisfied with the large size as it is almost unnoticeable even after installation and it is attached to Beauty.
View detail
I'm pretty happy with it
Above all, it is bright.
I guess it's worth the price.
Now we just need to see how durable it is.
View detail
I used it in another car and liked it, so I bought a repeat.
Used for Z650Zapper. I used it on my Z650Zapper and liked it so much that I bought it again, but the price had gone up by about 1000 yen. I felt the wave of price hikes.
The disengagement with the bracket is a little loose. Frequent inspection is necessary.
The finish is beautiful, so I am satisfied in this regard.
View detail