Reviews
Osha cosmetic lid
Osha's Cap that has been around for a long time.
[How is it used?
In Bolt's Cap on Silencer Bracket.
Was the one you received as per Image?
Image itself
Was the installation difficult?
It was so easy that I was surprised.
How was your experience with it?
It was great and Parenthesis is good.
[Included Parts:were they on?
It came with an outer bag.
[Was there anything that disappointed you?
None at all.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Cool!
I always buy CapBottle covers from you. View detail
One point
The price is a little high, but it stands out and is fashionable when worn.
It is a little loose, but with some ingenuity, it is not a problem.
View detail
For coloring around the Engine
Small but immeChainLarge Parts.
It is only a cap of M6 bolt, but I feel that the custom feeling will become even larger by setting several caps.
Gold tends to be too heavy, so I used it around the Engine area while racking my brains about this and that.
View detail
Cost-effectivenessOutclassing
We got this for the purpose of hiding the presence of Bolt, since there are many Red Mono Parts.
The problem with this type of small thing is that once you get into it, you lose the Drill. (Lol) 。
I'm sure it'll come off pretty easily." I thought it was a good idea, but it is fitted more firmly than I expected.
Just a Large size? Diameter? I felt that the NASA Type could hide the Bolt better.
View detail
For dress-up around Caliper
This is a Repeat item as I recently got into Cap Bolt Cover.
Gold is used as a color, but it would be too much like a "kudzu" if it is used all over the place, so red was chosen for this project.
It's just a Bolt cover, but it's a Bolt cover.
They say that just by fitting such a tiny object, the sense of custom increases.
However, I set the Caliper side to NASA Type, so it somehow failed. Crying 。
View detail
ImpactLarge, although not so subtle.
I ordered a Babyface Racing hook and a Silver cap bolt, which lacks a sense of unity.
Installation is done by "Giggle." It does not take much effort because all you have to do is push in the
Just be careful not to push too hard or it will float slightly.
Up close, it is obvious that Bolt is filling in the holes, but from the side, I think it gives a sense of Gold's cohesiveness. I think.
View detail
GOOD when combined with Cap Holder
I installed their Cap Holder and bought it to hide the Black Bolt head.
I was not sure about the other type, but this one is more integrated with the Holder in terms of design.
I'm not sure what to do with these items, but I'm afraid I'm going to run out of drills if I start obsessing about them. (Lol) 。
View detail
Rust prevention by preventing water accumulation in the recessed part of the bolt
[How is it used?
When it rains, water collects in the recess of the cap bolt, so I decided to cover it before it rusts.
Was the one you received as per Image?
It was just like Image.
Was the installation difficult?
Installation was super easy. I was rather careful to take it out of the package so as not to drop it.
I degreased the Bolt recess with Parts cleaner before installing it in the Bolt recess.
In order to prevent it from falling off, I applied a thin layer of Grip bond to the O-ring part of the shockproof Gel from DAYTONA that I happened to have.
How was your experience with it?
Works as per Image. It hasn't come off so far.
I chose the same black color as the Handlebar Post so it doesn't look out of place.
[Included Parts:were they on?
No. O-ring is already installed.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
It is better to degrease the recesses of the Point and hang/Bolt before installation to prevent them from falling off naturally.
Items to buy together/You don't need to buy it, but if you have Sealant or Liquid Gasket, you should apply it to the O-ring part and install it to prevent it from falling off naturally.
View detail
I installed it to Bolt of Tandem Footpeg.
I bought this to give my tasteless Bolt head a little Custom.
Because it is a Black Bolt and a Black Cap, it is difficult to understand it when seen from others, but
He is satisfied with Large, so it is good.
View detail
For Dress-up
Suitable for Cap bolt in various places.
There is a stopper on the product so you don't have to worry about it coming off.
I wish it was a little cheaper…
View detail
Cap bolt Cover
The Wrench hole in the Cap bolt is bothering me so I installed it as well as the Dress-up.
The color is Black, so it looks nice and tight.
View detail
It's not the way it's supposed to be used, but …
When I recently replaced it with an Accossat Wire Clutch Holder
The wire and lever attachment point is a Pierced-type pivot pin
Wire's ThailandCo will be in full view
I was looking for something to block up
I think you could use Cap bolt's Cover and the Pin hole diameter
When I measured it, it was 8mm, so I bought a cover for 10mm
I put it on as soon as I saw it and it was Exactly
I bought the Silver, but there are many color variations
You may purchase one to match the color of the Lever
After that, it might come off due to vibrations, so I'll use a Rubber-type adhesive
I'm thinking of fixing it
View detail
Almost satisfied
I installed it as a one point Accent around the Handlebar, good color and quality The appearance has improved in its own way and I am satisfied with it
However, I still think this gold amount is a bit high for 4 pieces, but at least make it about 700 yen I think it will be easier to buy if you give me the
View detail
Even the Small grain has a strong claim to fame
Changed the bolt of Exhaust Bracket and bought a cover because it is not good taste as it is I did
The colors of Anodized are beautiful and there are 13 colors to choose from
POSH sells two different Cap Bolt Covers, but I personally think that I think NASA Type is better for Parenthesis
I used Rubber-based adhesive because I mounted it on the sides
I've driven about 60km after installation and the fixation seems to be fine
It's not cheap as it costs 1,296 yen for four Small Parts, but Dress-up It is certainly effective
View detail
Very easy to install
Lost one Toledo Bolt cap
I was searching for a product that is hard to deteriorate, and it arrived..
OEM Product is also about 200 yen so it is not so expensive.
It is easy to install, so I worry a little whether it can not come off
Color selected Titanium. I think I'm matched cleanly.
View detail
Better TopIndicator!
- Decision of purchase
My favorite car Grom uses a lot of Gold for One point. Before installing Dirut JapanOPTopIndicator, I thought that OEMCap Bolt Cover was unsatisfactory and imageed MASACap Bolt Cover M8 Gold. If I did not install TopIndicator I think that I did not purchase it.
- Impression actually used
It is not a functionally improving part but improves self-satisfaction. In addition, the surroundings of Handlebar become gorgeous, and will complement OPTopIndicator. It is full of Custom feeling as it looks.
- Mounting difficulty
Easy to install by anyone. Just put it out of the package and snap it in. You can do it even if you are a son of a middle school student at home!
- Others
This time, I put a week's time to wear. For some reason - - - OPTopIndicator and Zeta : Exchange Stem Nut at the same time - I am working with installation, removing the Handlebar. Before removing the Handlebar, I worked with marking with Masking tape so that the previous Handle position can be understood, but for a week to confirm the Gap of the Handle position, confirm the Handle position while riding is. If you install Cap Bolt Cover without confirmation, it will be removed every adjustment. I thought that I could not get it. By the way, OEMCap Bolt Cover - - - For theft prevention, I used it for Cap bolt of Rear Sets!
View detail
Cap bolt cover
Small staff,but very useful. Not plastic,but made aluminium. Protect againts twisted dust and mud. This item shows it very much. View detail
M6 - It is purchase following M8.
Bolt 's head around Handlebar and Number - Plate somewhat concerns. (not cool?)
I have been looking forward to the Web that I'm searching for while having fun with Net, and found this part.
Attachment after purchase Instruction Manual includes (vertical) When installing it, consider the bonding method - - - Although it was stated as it is, it is installed as it is and it is in use without falling out even if it runs at 100 km / h. (It is self-responsibility - - - ).
If the price is a bit cheaper, I'd like to install it in various places, but it is the only dissatisfaction that around 4000 for around 1000 yen.
View detail
PoshCap Bolt Cover
PoshCap Bolt CoverChampagne gold
Satisfied with Cost performance.
Purchase for Bolt's Rust prevention.
Good for one point.
Recommendation.
View detail