Reviews
Small size is the reason for rust resistanceMaterial:Stainless Steel Screw!
[How is it used?
Replaced the brake hose guide with an external aluminum guide.:Replaced with Stainless Steel.
Was the one you received as per Image?
It is as accurate and clean as the Image.
Was the installation difficult?
Easy installation by simply replacing it.
How was your experience with it?
It can be used without worrying about Rust.
[Included Parts:were they on?
Screw only, nothing else is included.
[Was there anything that disappointed you?
Not particularly
▼Quantity since wdisc.:Pair (for Left and Right) Four bottles are required in the following table.
View detail
Cowl stop.
The 900SS has a spacer and bolt that fly out of place due to vibration, and the front cowl that holds the spacer in place needs to be mass-tightened regularly as the bolt will loosen if you are not careful. Posh rubber is similar to the OEM product and I think the quality is even better. View detail
Is it sensitive to ultraviolet rays?
I put it in a Screen Fixing Screw, but I found cracks on 3 out of 6 screws, perhaps due to UV exposure, so I bought it for replacement. I have no problem with the quality if I consider it as a consumable product.
This time I bought it at the same time with Seat Cowl and for Side Cover for 6Millimeter screw.
View detail
It's degrading
I put it in the Screw of Seat Cowl and Side Cover to prevent vibration, but I bought it for replacement because there was a cracked part after about 2 years due to deterioration.
Since it is polycarbonate, I think it is necessary to be careful about cracks caused by over-tightening.
View detail
Expensive but worth it!
[How is it used?
OEM Washer Rustetc. Rustproof Material as Repair Parts as it deteriorates over time.:I changed it to Stainless Steel.
Was the one you received as per Image?
High Quality and Rust-Free!
Was the installation difficult?
It is easy to replace an old Washer.
How was your experience with it?
You can use it without worrying about Rust as well as Nut.
[Included Parts:were they on?
Nothing else is attached as shown in the image.
[Was there anything that disappointed you?
Expensive is a regrettable Point in Neck.
I am not sure if they are not sold in Single Item, but I have a mid-Quantity:It is subtle that you have purchased 1 Set of 3pcs.
View detail
Mounted on a Brembo oiler
Because the rubber mat I bought elsewhere was too thick to fit on the oil pot, I bought this rubber mat, which is relatively thinner. It is just right to install on Brembo's large oil pot. It is used with the galespeed oil pot bracket. One thing is that the metal gasket is a bit thick and cannot be fully screwed in place when screwing the bolts. -------------------------------------------------- -------- Because the rubber pads I bought elsewhere were too thick and installed on the oil pot, I bought this rubber pad, which is thinner than it. Installed on the big oil pot of Blabo, it is just right .It is used with the GALESPEED oil pot bracket. One thing is that the metal pad is a bit thick. It cannot be completely screwed in place when the bolt is twisted. Powered by Google Translator View detail
Fixing of plastic parts
We use it to prevent scratches and loosening of the Fixing Screw part of plastic parts. The product is available in large quantities and is reasonably priced, so it is useful as a periodic replacement or consumable item due to deterioration or deformation. View detail
Protect the Cowl paint and seal
When you tighten the Screw, the paint and seal on the surface of the Cowl will come off, but it can be removed It's the only thing that can prevent it And I installed it There seems to be quite an effect, and I can fasten Screw with peace of mind
I want it to be a little thinner You can feel that you are wearing it a lot
View detail
It's better to have it where vibration is a concern
brembo [Color] When the specs were changed to Smoke's Reserve Tank, the mounting holes are large There are no bolts that will fit as is It seems to assume Rubber
So I bought the same product that fits the hole diameter
I think it's good because it fits well and absorbs vibration well
However, you will need to periodically retighten the Bolt as it is tightened through the Rubber
View detail
Along with Bolt exchange of M5 Size
I wanted the same color Spring washer at the time of replacing the hexagonal hole Bolt of Black Painting at the same time, but at the Motorcycle Parts specialty shop in the neighborhood where I live and the home center there is no treatment and purchase items here.
Although it is a very common Spring washer, the number of entries is also Quantity : 2pc. I am satisfied because it was the number I wanted personally in Set.
However ... if you can only say it, the price feels a little expensive ...
But since each BoltWasher's Lineup is also abundant, we can not find anything of Large resistance unless it is of special shape!
I still need Bolt classes, so I would like to continue using this Manufacturer's thing in the future!
View detail
Reservoir for Ninja H2 Tank used for diversion
I bought Nisshin Rapon for installing Ninja H2's reservoir tank.
【What made you decide the purchase?】
I saw an article diverting Ninja H2's reservoir Tank to Nisshin's Master cylinder in a certain blog, so I bought this product according to that blog.
【How was it actually used?】
Because it has Rubber in between, it is hard to be affected by vibration, and fixing is also done with chitin so you can run with confidence.
【Mounting was difficult?】
I pulled out the Gold Genus Color which is attached to the Rubber and fixed it to the reservoir Tank.
In my case I wore it with bare hands, but if I feel stiff, Slotted screwdriveretc. Please push it with the tool of.
【Please tell me the installation point and hang】
When inserting the Rubber using the tool, I think that it is good to curing and not to hurt the Parts and the car body wearing the Rubber or to adjust the power.
[Is there anything I was disappointed about?]
None
【Hope for Manufacturer - Please let me know if you have any improvement points]
Quantity : 1 Set of 2pcs. It is sold at, but this time I used 1pc. It was only.
Because it becomes expensive if set, 1pc. I thought it would be saved if I sold it with Single Item.
【Have you compared items?】
None
[Others]
In my case I used it to fix reservoir tank, for example Cowletc. It is also possible to use the H Type Rubber for protection of Wiring even when opening a hole in Wiring.
1pc. I thought it would be better if the selling price or price was a little cheaper.
View detail
OEM Parts Number
I used it to divert Kawasaki H2's Reserver tank. It matches Exactly to the hole diameter of Reserver tank. OEM Parts Number Although it is OK to purchase, I think that it would be better to use this if you have trouble.. View detail
Attached to DAYTONA 675
Purchased for Master cup of H2OEM I bought the other day.
1pc. I'm fine but Quantity : 2pc. Set comes in, so it will be expensive, but it is also necessary for not to break by vibration.
Another one - - -
Master cup Shall I buy it for someone (Lol)
It absorbs vibration!
View detail
With commodity fee Gold adjustment.
Adjustment of commodity fee Gold (To make it more than 3000 yen) I bought it with.
I bought it because it is just right price with reliable Brand with frequently used parts.
View detail
It is putting into the Stay origin of a general-purpose retractable Blinker. In the standard item, since 4-mm thickness is not seen easily, it is just a convenient Parts. The settlement also became a good satisfactory result.
It is putting into the Stay origin of a general-purpose retractable Blinker.
In the
standard item, since 4-mm thickness is not seen easily, it is just a convenient Parts.
The settlement also became a good satisfactory result.
View detail