Reviews
Rigidity is solid.
Quick release braceShaft Type2 requires Quick Release Brace Clamp (sold separately).
You can also choose from a variety of color variations, so you can change the color of the Clamp and Shaft.
It is different from paint-like gloss.
Mounting is Clamp's ScrewQuantity:Fixed with 2pc
View detail
Match the color of the car body.
Deep orange was selected to match the body color Orange.
PackageThe color before opening the package looks somewhat Orange or Red under the light.
Easy installation on vehicle body with only M6 cap bolt
Under sunlight, the Orange color was consistent with the color of the car body.
No BALI, etc. and quality seems good.
View detail
Fixing essentials trigger
Installed together with POSHSuper Motorcycle Bar. The old one was not a Quick Release Clamp, so it was a bit large, but it is still extremely convenient. I usually use only a waterproof digital watch and a compass in case of stormy weather, but it is really helpful when I have a lot of things I want to attach, such as a smartphone, a radar search, etc. It is essential items in this day and age. View detail
Good texture
I purchased the zrx1200daeg because the Handlebar area was too tight to fit the Smartphone Holder and USB power supply.
Although a Handlebar Clamp needs to be purchased separately, I am satisfied because the Smartphone Holder and USB power supply are mounted a little higher than the Handlebar.
View detail
A set of the circumferences of a preparations handle was changed into commuter rapid-service specification. As a result of examining many things, the product made from POSH out of which a feeling of unification comes was used. A handle bracket, a
A set of the circumferences of a preparations handle was changed into commuter rapid-service specification.
As a result of examining many things, the product made from POSH out of which a feeling of unification comes was used.
A handle bracket, a handlebar, a handle brace, a handle brace clamp, bar end, and a heavy weight nut were made the product made from POSH.
Color was unified by champagne gold.
When the vibration at the time of a run was reduced, there is also Schopp's recommendation and it equipped with the handle brace and the handle brace clamp.
Since the direction of the effect carried out simultaneous wearing also of heavy weight bar end and the heavy weight nut, the effect of the simple substance was not able to be checked, but it became the feel gently carried out compared with normal as the whole being operative.
Since there were also the master cylinder of a brake and a clutch and hose exchange besides the above, attachment was requested from Schopp.
However, as long as a configuration is seen, even if it equips by itself, I think that it is possible in about several minutes.
Since the master cylinder of a brake and a clutch also chose the gold of the daytona nisshin, there is a feeling of unification, and it was finished in the satisfying thing.
View detail
Repeat Purchase
I replaced the Gold color that the previous owner had with Black. I am satisfied with the color as it has calmed down a lot as I had hoped. Durability (Painting) The Black color looks poor compared to the Gold color, although the Gold color did not peel off even when handled roughly. I will review in the future. View detail
The quality is good, but the price is a bit high.
This is a replacement from the Gold color that the previous owner had. There is a gap on the Left SideClamp, so I will use a Washer. Durability (Painting) will be reviewed in the future. View detail
Good
I was worried about the color. I chose champagne gold to match the color of the fork on the Grom, but gold might have been a closer color. I didn't want to scratch it, so I put a thin rubber sheet between the screws. I didn't want to scratch it, so I put a thin rubber sheet between the screws. When I have time, I'll try to fix it with a washer. View detail
Sold separately from the Handlebar Brace.
I bought this clamp along with the Brace to install the Handlebar Brace on my Honda, Grom and JC92.:I think they should be sold as a set, but.... When I installed it, I dropped it on the handlebar and the paint on the handlebar peeled off a little. I think it's a very reasonably priced part, so it's easy to get for custom beginners.
The installation was a bit tricky to get the Brace straight and at the right angle, so I had to temporarily tighten it several times, move it away, check the angle, and repeat.
I was worried about the length of the supplied bolt, so I bought a bolt 2mm longer than the supplied bolt from Home center and used it. I'm very happy with it!
View detail
I wonder if it's a custom that can be done easily.
I wanted to add a small bag around the handlebar of my Honda, Grom and JC92, so I installed this Handlebar Brace. The color is Gold, and it's a nice color that stands out.
Clamps (sold separately) are required for installation. It's a bit of a pain to get the angle just right, it's wobbly and hard to get it straight. I went to the home center and bought a Gold Stainless Spring Bolt, which is 2mm longer than the supplied Bolt, and a Quantity of M5×20mm Bolt.:I bought 2pc and used it.
I think the vibration has been reduced and my hands are less tired. I have not yet tried to attach the bag, which was my original goal, but I am satisfied with the vibration reduction and the easy custom look! I'm glad I tried it!
View detail
Be warned! make sure you measure the width of your handlebar. Please also be notice that it DOESN"T come with the clamp. Good material as you can expect from Posh. View detail
It's just like the image.
I bought a posh clamp and used a shaft that I had on hand, but I couldn't feel any difference before I installed it. I bought this one because I didn't like the position of the shaft.
The product had a good texture and the color was as per Image. In addition, naturally, unlike the Shaft that was diverted, I was able to install it exactly without processing.
I was quite confused between 206mm and 187mm, but since the shaft I used was generally 216mm, I thought that there was not much difference between the 206mm and the 187mm and could not expect any change, so I decided on the shorter one.
The Handlebar is a HURRICANE European1 type, and the position of the Brace is as per the Image, and when I used the Shaft, the position of the phone was too high for my liking, but I think this is a good fit. I was able to set it about 2cm above the OEM Handlebar Holder, so I was able to move the Radar and my phone to a position where I could see them better than when I had it cinched to the Handlebar Holder.
I think you should be careful not to put the wound when you fasten the clamp or install the electronic equipment.
View detail
Easy installation
I decided to install the Handlebar Brace because I was worried about the vibration of the Handlebar, but I was going to use the one that came with Hardy's Handlebar, but the clamp is not an open type, and I had to remove all the things attached to the Handlebar to install it. It was necessary to remove all the things attached to Handlebar, and it was troublesome, so I came to purchase this one. The product is solid, and there are no problems with the texture, color, shape, or finish, and I think the cost is good. I dropped it during the installation process, and of course, the paint was scraped off and Wound came in. If you are concerned about the wound, please work carefully.
The thickness of the joint of the shaft is different from the one of posh. I had to shave off about 0.5mm from the joint on the shaft side to be able to fix the clamp to the handlebar, and then I moved the Radar and Smartphone Holder onto the shaft. It was very easy to install thanks to this Clamp. The effect on vibration is subtle. It seems to be effective, but it may be my imagination. I will try to think of something else.
As for the Shaft, it was a little long, so the mounting position became high, and I don't like the position of Radar and so on a little. I'm thinking of buying a posh shaft of moderate length in the near future.
View detail
Ideal for increasing the rigidity of the handlebar area
I've read some people's impressions that Handlebar shakes a lot when it's stopped. I didn't have any problem.
So, if you want to increase the rigidity, it would be good to add it.
View detail
I'm using it for a different purpose.
I installed the Handlebar for the purpose of using it as an auxiliary bar for the water temperature gauge amplifiers and the Drarecorder Switch.
(So Handlebar is also a weak Material that needs this bar):(It's still OEM, not Aluminum)
We are satisfied with the Accent in terms of Design.
It is also available in a variety of lengths, and the mounting flange is sold separately in a variety of colors.
View detail
Solidly built.
I bought it with the same manufacturer, Brace, but I didn't learn enough and it was too Exactly I couldn't adjust Clamps, so I shaved a little bit with Grinder, but I shaved it off. The cylinder hides the cylinder so there should be no problem with its appearance.
View detail
That would be handy
Later, I bought it to attach a Porch to put in a Small object etc. 。 You can also attach a smartphone holder to this product if it's attached, and you can also use the A I recommend it because it gives a little bit of a custom feel. 。 View detail
Do you think it's expensive?
I bought it to install the ActionCam mount to the D-TRACKER125 It is good that it is easy to choose from a wide range of colors and lengths, but the clamp part must be purchased separately I can't afford not to install it If you buy both, it will cost you a lot of gold But in my case, I really wanted to match the color of the OEM handlebar It's safe to say that I had no choice It's not a good idea to buy a cheap one that doesn't match the colour because you won't be happy with it anyway Installation is very simple but Quantity:Pair (for Left and Right) I had to adjust the height of the bar, otherwise it would be attached at an angle, so I installed it while making fine adjustments The color is perfect! The color is so perfect that you'd think it was OEM parts for the D-TRACKER 125! View detail
Feeling fiddling. I will soak in my self-satisfaction.
I installed it on the ZrX 1100. It is OEMHandlebar.
Choose Blue to fit the car body color. Installation is simple. OK with on-board tool. The texture is satisfactory.
Although there is no change in running, there is a sense of messing around and I am immersed in considerable self-satisfaction.
The purchase reason is the installation of ActionCamera. It got together beautifully.
Shaft and Quick Release Brace Clamp purchased with Set.
Shaft does not come with us, so please join us.
Since both Color are abundant, various combinations can be done.
I tried to Blue and Matte Black. I like it..
I tried to actually run, but after running it did not slip or loose.
Impression sentences are the same as Shaft, but I changed the pictures.
View detail
I have a good texture.
I installed it on the ZrX 1100.
It is OEMHandlebar. Choose Blue to fit the car body color.
Installation is simple. OK with on-board tool. Feel satisfactory.
Although there is no change in running, there is a sense of messing around and I am immersed in considerable self-satisfaction.
The purchase reason is the installation of ActionCamera. It got together beautifully.
Shaft and Quick Release Brace Clamp purchased with Set.
Shaft does not come with us, so please join us.
Since both Color are abundant, various combinations can be done.
I tried to Blue and Matte Black. I like it..
Impression sentences are the same as Shaft, but I changed the pictures.
View detail