Reviews
Solidly built.
I bought it with the same manufacturer, Brace, but I didn't learn enough and it was too Exactly I couldn't adjust Clamps, so I shaved a little bit with Grinder, but I shaved it off. The cylinder hides the cylinder so there should be no problem with its appearance.
View detail
It's a little tight.
I bought this one from a reviewer who uses it on his ZrX1200 DAEG.
It's definitely a good fit, but I couldn't adjust the angle of the Clamp, so I had to cut the Clamp down a bit.
View detail
That would be handy
Later, I bought it to attach a Porch to put in a Small object etc. 。 You can also attach a smartphone holder to this product if it's attached, and you can also use the A I recommend it because it gives a little bit of a custom feel. 。 View detail
Do you think it's expensive?
I bought it to install the ActionCam mount to the D-TRACKER125 It is good that it is easy to choose from a wide range of colors and lengths, but the clamp part must be purchased separately I can't afford not to install it If you buy both, it will cost you a lot of gold But in my case, I really wanted to match the color of the OEM handlebar It's safe to say that I had no choice It's not a good idea to buy a cheap one that doesn't match the colour because you won't be happy with it anyway Installation is very simple but Quantity:Pair (for Left and Right) I had to adjust the height of the bar, otherwise it would be attached at an angle, so I installed it while making fine adjustments The color is perfect! The color is so perfect that you'd think it was OEM parts for the D-TRACKER 125! View detail
Purchased Mat titanium
MONKEY (Z50J) Because Knob of Left Side Hondlebar is shifted by vibration,
As a countermeasure to that, I bought it with Race Shaft at the same time.
Since it is simultaneous with Race Shaft,
Impre will be with Race Shaft,
I have not run yet, but I was able to experience the effect just by pushing and pulling the car body.
I made Shaft Blue and Clamp Mat titanium,
I think that it is good to be able to combine with your favorite coloring.
View detail
Used in MONKEY
MONKEY (Z50J) Because Knob of Left Side Hondlebar is shifted by vibration,
I bought it as a countermeasure.
I have not run yet, but I was able to experience the effect just by pushing and pulling the car body.
The length is perfect, there is a Dress-up effect,
It seems that it can also be used for Mount such as Camera.
Because it is sold separately with Clamp, I think that it is also possible to combine with your favorite coloring.
View detail
Feeling fiddling. I will soak in my self-satisfaction.
I installed it on the ZrX 1100. It is OEMHandlebar.
Choose Blue to fit the car body color. Installation is simple. OK with on-board tool. The texture is satisfactory.
Although there is no change in running, there is a sense of messing around and I am immersed in considerable self-satisfaction.
The purchase reason is the installation of ActionCamera. It got together beautifully.
Shaft and Quick Release Brace Clamp purchased with Set.
Shaft does not come with us, so please join us.
Since both Color are abundant, various combinations can be done.
I tried to Blue and Matte Black. I like it..
I tried to actually run, but after running it did not slip or loose.
Impression sentences are the same as Shaft, but I changed the pictures.
View detail
I have a good texture.
I installed it on the ZrX 1100.
It is OEMHandlebar. Choose Blue to fit the car body color.
Installation is simple. OK with on-board tool. Feel satisfactory.
Although there is no change in running, there is a sense of messing around and I am immersed in considerable self-satisfaction.
The purchase reason is the installation of ActionCamera. It got together beautifully.
Shaft and Quick Release Brace Clamp purchased with Set.
Shaft does not come with us, so please join us.
Since both Color are abundant, various combinations can be done.
I tried to Blue and Matte Black. I like it..
Impression sentences are the same as Shaft, but I changed the pictures.
View detail
Basically look important?
Once in the future Navigationetc. Although I purchased it for the installation of, I feel that it looks more like shape.
If you really want to raise the rigidity of Handlebar or Clamp on various things, may it be better to have less undulating shape?
Products of the same type have various variations from each company, so the purpose - I think whether it is good to choose according to the point that emphasizes.
In my case I put importance on Color I want and made it to Manufacturer here.
View detail
It seems easy, but a little Large strange?
Installation itself is easy, but Quantity : Pair (for Left and Right) It is difficult to fix it while aligning the position.
Brake - Around Clutch - Handlebar OEM - Clearance is quite tough if it is NORMAL.
View detail
Mounting on OEMHandlebar of GORILLA
It is just about to clamp to GORILLAOEMHandlebar with a length of 226 mm in length.
Because coloring is plentiful and sold separately with Clamp,
I was wondering whether to dress the colors of Clamp and the bar separately,
It became troublesome to think and eventually made it a solid color.
Making is very solid and color development - Design is also good.
It is good to match the colors of Clamp and bars to your liking,
It costs a lot if you buy both, squeezing Color, Clamp and Set selling
I also thought that if I had Reduction in cost.
View detail
I'm Well..
Attached to zrx 1200 daeg Normal handle, Shaft full length : It was exactly the case with 206 mm.
Since we are exchanging Master cylinder with Brake, Clutch Nisshin's Radial, Clampetc. Although there was no contact, I think whether it is necessary to adjust slightly if using Normal master.
View detail
Handlebar around.
Parts attached at the very beginning after car delivery.
I want to frenk around Handlebar asexually and buy impulses.
I had a bit of difficulty installing the horizontal, but it was relatively easy to install.
I feel that the rigidity has increased somehow after installation.
View detail
Easy installation!
Shaft and Color should be combined.
It can be combined with Color of the car body, it will be one point dress-up.
It's easy to install and it will not take 5 minutes.
If you only pay attention to Shaft's Length Clamp is fine.
View detail
Looks fashionable
I thought about turning on the Smartphone Holder instead of Navigation but I thought that I wanted to close the face a little more and I found this product. Shaft and Clamp should be able to combine different colors! It's a bit of a Dress-up. Size was perfect and easy to install.
View detail
Because it is thick, presence and rigidity increase.
I used it for XR 100 MOTARD 145 cc.
Things that had been attached up to this point were relatively thin with normal things.
Waiting Big's site casually, I discovered this product unexpectedly.
Since Clamp seems to be reusable, order only the bar.
I made the bar Plating.
It arrived on the next day and it arrived on the next day, as soon as I installed it, the bar was as thick as Handlebar, the presence became cooler than I expected.
The feeling of running also has a sense of rigidity and is solid.
When ordering, we Recommendation to measure Length well.
It is this product Recommendation of texture, rigidity, highest Rank.
View detail
It is indispensable to install Brace ~.
Sorry for the same picture as Race Shaft's Impression. m (__) m
There were no other pictures ,,,. (^_^;)
In order to attach Handlebar Brace, Clamp is necessary ,,,,.
I bought it inevitably.
In terms of goods, there are two types of Millimeter Size and Inch size, but Color has 16 colors as well as Brace.
Naturally I made it the same Color as Brace.
Wearing it was easy to wear the brace and tighten the Bolt with Hexa.
Since it is only necessary to pay attention only to the position and angle to be attached so that no force is applied to the gap or strange, it is completed in a few minutes.
Total coordinate with Brace, also matching with Color of Motorcycle, change Fashion nature, etc. How about also your own customization?
View detail
Handlebar rigidity Up and Smartphone Holderetc. Ideal for mounting
Because the Handlebar width of the V-Strom is wide and the height is high, the Handlebar is also long, so the Handlebar was slightly bent, such as when walking pushing.
I did not like this stiffness looseness, Smartphone Holder, ActionCameraetc. I also wanted Clamp to install, I wear it.
Length was 4 kinds, Color was 16 colors and Variation was abundant, so I chose without hesitation.
Easy to install, just clamp with Clamp and tighten with Bolt.
It is okay to pay attention to the installation position and angle so that no clearance is left or unreasonable force is not applied. (^o^) /
The impression of trying, of course, the rigidity rises, I am satisfied with the tightly feeling at the time of pushing walk and the handy things such as attaching Smartphone Holder.
Is the price reasonable too?
Strongly, if you mention the difficulty, it is that it does not suit your preference.
Well, please ignore it as it's a matter of preference. (^ ^ ゞ
View detail
BW'S125(SEA6J)
I installed it on BW'S 125.
I am planning to install a smartphone.
I tried to Blue with Wheel and other Parts.
Since the new BW'S 125 still has few Parts, I think I want to work little by little
View detail
It also became a measure against vibration.
Attaching to attach a smartphone etc..
However, there was also the effect of countermeasures against vibration.
When Mirror of Grom bought his hand, it was blebure, but it settled to a level that looks good.
Handlebar exchange, weight bar, etc. were also considered, so we did not have to replace it.
View detail