Reviews
Poor return of Engine Starter Motor
After a year and a half of use, the return of the Engine Starter Motor was poor and the CellMotor kept turning.
The same thing is written in the review of KIJIMA's Engine Stop Switch, so things seem to be the same.
For now, I did a Silicon spray and it came back, but I'm sure it will reappear after a while.
It is inexpensive, so let's just use it as such. (Laughter)
View detail
Separate handle makes it difficult to see the upper rear side.
With the separate handle, it is difficult to see the upper rear side even if the mirror surface is adjusted to the fullest extent. View detail
It may not fit in Separate handle.
With a separate handle, even if the mirror surface is turned fully upward, the upper rear side is difficult to see. View detail
Fits: KAWASAKI Z900RSCAFE, KAWASAKI Z250, KAWASAKI NinjaZX-25R, KAWASAKI NinjaZX-25R, KAWASAKI ZZR1400, KAWASAKI ZZR1200, KAWASAKI ZZR1100, KAWASAKI ZX14R, KAWASAKI ZX10RR, KAWASAKI ZX10R, KAWASAKI ZX-9R, KAWASAKI ZX-7R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1100, KAWASAKI ZEPHYR1100RS, KAWASAKI ZEPHYR1100, KAWASAKI Z900RS, KAWASAKI Z800
My hands were numb because it was not Rubber mount.
I replaced the OEM with this one, even though it has Weight.
My hands were numb because it was not Rubber mount.
Bar End of Other Brand Product is made like this in Large size.
I have been looking for a product that is heavier than OEM and has a rubber mount, but so far I have not found one.
View detail
usually
The texture is normal and a bit expensive for a Mirror filler. View detail
high
I bought it because I made a bar end mirror.
The handlebar is black, so choose black.
I think it's a very expensive product for the price.
Easy to lick when installing and removing with a slotted screwdriver
Don't put too much pressure on it, it will lick you in one shot.
SmallParts, but it's Exactly after Mirror.
Next time I won't buy it.
View detail
Problems with length and Nut.
First of all, the length of the opening side and the closing side is different by 3cm, but I don't understand the meaning of this difference in length no matter how I install it. It's a pity that the bolt for Throttle side is 13mm head. This is not good. View detail
Design is good, but build quality is…
Quantity:Pair (for Left and Right) I installed it on my SR400, but after 2 days of installation, the mirror surface started to move with the vibration of the motorcycle.
I bought it after I was troubled by bad visibility in terms of short mirror, broken arm by vibration of SR, refreshing and simple design, relatively affordable price, and considering good and bad points. I've been riding it only for commuting.
It's a shame because the Design was well suited to the Separate handleSpec.
View detail
Fits: KAWASAKI NinjaZX-25R, KAWASAKI NinjaZX-25R, KAWASAKI Z250, KAWASAKI Z900RSCAFE, KAWASAKI NINJA650R, KAWASAKI NINJA650, KAWASAKI NINJA400R, KAWASAKI NINJA400, KAWASAKI NINJA250R, KAWASAKI NINJA250, KAWASAKI NINJA1000, KAWASAKI GPZ900R, KAWASAKI GPZ1100, KAWASAKI Z1000, KAWASAKI Z250, KAWASAKI Z750, KAWASAKI Z750S, KAWASAKI Z800, KAWASAKI Z900RS, KAWASAKI ZEPHYR1100
Excellent sense of gravity
There are many kinds of Bar Ends, but Posh's Ultra Heavy Bar End is as expected in terms of weight and design. However, when you install it on DAEG, Screw lock is working well, so it is impossible to use Driver. View detail
Price is too high
Is it more emphasis on fashion than functionality? Material is too soft.
Because it is a wider Minus groove, you can easily lick it when tightening with Driver.
I recommend you tighten it moderately with a 500 yen coin.
So it is better not to think of Bolt to install Brackets.
I thought that I wanted Material to be something like Stainless Steel and tighten at Hexagonal Wrench.
It is appreciated by Yamaha car User that there is reverse Screw type...
View detail
The quality is good - - -
Although it is sometimes called Posh made, it is not bad about the quality aspect, but because Screw 's adjustment range of the car body side has been made wider, the Screw will loosen only by fixing the Screw head alone.
I think that it is necessary to bite Rubber Bush as a countermeasure and make it harder to slip.
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750, KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Zephyr 1100
Regrettably it seldom changes at about 10 mm.It is Ok if it thinks that mere a few is also.Attachment is very easy.I think with appearance that it is good.
Regrettably it seldom changes at about 10 mm.It is Ok if it thinks that mere a few is also.Attachment is very easy.I think with appearance that it is good. View detail
Fits: SUZUKI V-STROAM250, SUZUKI V-STROAM, SUZUKI SV650, SUZUKI GSX250R, SUZUKI GSX-S1000S KATANA, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX1400, SUZUKI GSR400, SUZUKI GSR250, SUZUKI BURGMAN400, SUZUKI GLADIUS650400
[Webike Monitor] Probably because it used together with heavyweight Nut, on the whole, vibration decreased, but the about 4000~5000 rotation out of which vibration had come most hardly changed, but the lay which is not used was the Massey grade. I
[Webike Monitor] Probably because it used together with
heavyweight Nut, on the whole, vibration decreased, but the about 4000~5000 rotation out of which vibration had come most hardly changed, but the lay which is not used was the Massey grade.
I do not use together but think that I will try on each.In addition, although it asked for the color by the Titanium, the Image was considerably differed from in brown.
View detail
Fits: KAWASAKI Ninja 400, KAWASAKI Ninja 250R, KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI Zephyr 1100, KAWASAKI ZZR1100, KAWASAKI ZX-9R, KAWASAKI ZX-7RR, KAWASAKI ZX-7R, KAWASAKI ZX-1, KAWASAKI ZRX1200R, KAWASAKI GPZ900R, KAWASAKI GPZ1100, KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI Zephyr 1100, KAWASAKI ZZR1100, KAWASAKI ZX-9R, KAWASAKI ZX-7RR, KAWASAKI ZX-7R, KAWASAKI ZX-1, KAWASAKI ZRX1200R
It purchased as an Accent of the circumference of a Handle with Grip exchange. since it is called aluminum ware although the form of goods is good -- from before opening -- a fine dent and crack were worrisome. since the Package of goods is [ other
It purchased as an Accent of the circumference of a Handle with Grip exchange.
since it is called aluminum ware although the form of goods is good --
from before opening -- a fine dent and crack were worrisome.
since the Package of goods is [ other products and / ? ] -- the crevice between goods and a Package --
-- it was thought that it collided inside greatly and had the crack.
It is also thought that being packed up again while the Screw of attachment is contained in the hole of goods has the
problem.
Since the
goods themselves are good things, an improvement will be desired for the method of packing from now on.
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750, KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Zephyr 1100
A Brake hose/Cables Although it was with exchange needlessness, by my Motorcycle, the Brake hose was exchange required at least. It has become remaining as it is, without attaching after all.
A Brake hose/Cables Although it was with exchange needlessness, by my Motorcycle, the Brake hose was exchange required at least. It has become remaining as it is, without attaching after all. View detail
Since it was that it was a vacation today and rain, the POSH Posh Stainless touring bar neglected with after-purchase attachment not performed was attached. It attaches in about 1 hour and about 20 minutes in time, and is completion. The fixing hole for
Since it was that it was a vacation today and rain, the POSH Posh Stainless touring bar neglected with after-purchase attachment not performed was attached. It attaches in about 1 hour and about 20 minutes in time, and is completion. The fixing hole for a Switch is made in the bar, and positioning of a Switch is easy. However, it differs in appearance that the hole which fixes a Cable is not open as a different point from an Original from the point that there is no Drain hall in a Center and that there is no position mark to clamp (it is not a center although the POSH sticker is stuck). A Clamp position will be simply decided, if it piles up with an Original and a position is copied on a Tape. Moreover, to an Original, since welding fixation of the weight is carried out at the Bar end (is it the purpose of easing vibration of a Handle?), I wish for vibration of a Handle to check how much it changes, and to see it. If it checks the Test sheep and later for rain, it rises again today. View detail
Fits: SUZUKI V-STROAM250, SUZUKI V-STROAM, SUZUKI SV650, SUZUKI GSX250R, SUZUKI GSX-S1000S KATANA, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX1400, SUZUKI GSR400, SUZUKI GSR250, SUZUKI BURGMAN400, SUZUKI GLADIUS650400
CB400SF HYPER VTEC SPEC3 is equipped. The color chose silver. He was surprised for vibration to be reduced more than it considered. Attachment is also easy and it is saved. Although based also on a vehicle type, I feel that it is large to
CB400SF HYPER VTEC SPEC3 is equipped.
The color chose silver.
He was surprised for vibration to be reduced more than it considered.
Attachment is also easy and it is saved.
Although based also on a vehicle type, I feel that it is large to CB --
Although there is no mind exchanged since an effect can be felt, the direction of the dress-up purpose up considers that it is better to choose carefully.
View detail
Fits: HONDA CBR1000RR, HONDA CBR600RR, HONDA CB400 SUPER FOUR, HONDA CB1300 Super Four, HONDA HORNET600, HONDA HORNET900, HONDA NC700S, HONDA NC700X
Since an authentic positive one is black, it is the touch which the little dress-up effect up may suit. Attachment is easy, loosens a screw and only replaces it as it is pure. Since it saw having dropped out for the information on a net while runn
Since an authentic positive one is black, it is the touch which the little dress-up effect up may suit.
Attachment is easy, loosens a screw and only replaces it as it is pure.
Since it saw having dropped out for the information on a net while running, I have applied the screw lock agent.
It is a regrettable point that attached at the end, and a bolt's not being the same color and inner metal fittings are long, and are showing for a while.
It is ~, although it becomes empty since he thinks that it becomes dress-up parts by which the point should just be improved.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX250R, SUZUKI SV650 ABS, SUZUKI GSR250, SUZUKI GSR400, SUZUKI GSX1400, SUZUKI Bergman 400, SUZUKI Gladius 400, SUZUKI Vstrom 250, SUZUKI V-STROAM 17, SUZUKI V-STROAM 17
Since it will finish if a color can also be chosen from much inside and also there are also 3 minutes of attachment with one driver, it can do custom very easily. When it falls, damage is extended a handle bending, thanks to bar end, or the plastic pa
Since it will finish if a color can also be chosen from much inside and also there are also 3 minutes of attachment with one driver, it can do custom very easily.
When it falls, damage is extended a handle bending, thanks to bar end, or the plastic part of a throttle breaking.
When choosing bar end, we recommend you the thing in which the portion is even, and another goods with which the core is contained in inside firmly.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX250R, SUZUKI SV650 ABS, SUZUKI GSR250, SUZUKI GSR400, SUZUKI GSX1400, SUZUKI Bergman 400, SUZUKI Vstrom 250, SUZUKI Gladius 400, SUZUKI V-STROAM 17, SUZUKI V-STROAM 17
笆?Motorcycle Z1000 (2006) When exchanging the reason handlebar for [ZR1000A6F] 笆?purchase for EZ-FIT BAR of EFFEX, it purchased simultaneously. In consideration of the protection effect and the price, the manufacturer used POSH. It is the problem
笆?Motorcycle Z1000 (2006) When exchanging the reason handlebar for [ZR1000A6F] 笆?purchase for EZ-FIT BAR of EFFEX, it purchased simultaneously.
In consideration of the protection effect and the price, the manufacturer used POSH.
It is the problem of appearance which used the NASA type simply.
The color was made into simple Black together with the handlebar.
笆?If there is an attachment plus driver, anyone can attach.
笆?Good point and color can be chosen.
- It can choose out of four kinds in a form or a size.
- If it is a pipe handle, it can respond to 14~19 mm in inside diameter.
笆?The point and the protection effect which is not good are questions ...
笆?Since the comment outside diameter is the same path as a handlebar in 22 mm, it will overflow by the thickness of a grip.
Although somewhat small kana was thought, it will not be worrisome especially if it gets used.
When it had got used exactly, it fell, but it separates with an impact and the protection effect is ?.
Although the happy handlebar, the grip, and the lever were safe, I feel [ of since the tank caught ] like for it.
The tank was dented splendidly.
Next, he thinks that he will make it the VIVID big bar end whose outside diameter is 30 mm in the same POSH.
Because of the disgrace of separating at the time of a fall, though regrettable, they are two stars.
View detail