Reviews
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R SE, KAWASAKI ZX-4R SE, KAWASAKI ZX-4RR
Cosmo
Note that the OEM LED Blinker has a Large Coupler and will not fit through the wiring hole.
Other than that point, I'm glad I bought it.
View detail
POSH Faith Ultra Heavy Bar End Outer
SRX has a longer Bar End as Standard Equipment, but it is already discontinued.
While products of similar length are hard to find, this one is just right, although it is one size too large.
View detail
If Black!
It is used on brembo's Radial brake master 14RCS.
I bought a PLOT Tank BracketBPS002-BB at first, but the rubber hose was bent in the middle. I searched for a lot of information and came up with this product.
This product allows the S-15BTank to be fixed in an almost perfect position and angle, with a very natural bend in the rubber hose.
I have two complaints:I want a black color and the BoltM6×30mm is too short to install on the MASTERCylinder. It is not impossible to install the bolt, but it is necessary to replace it with M6×35mm bolt. (The photo is before replacement).
The color is simply my taste, but I have reduced one star because of the short Bolt.
View detail
Fits: HONDA FORZA, SUZUKI GSX1400, SUZUKI GSX1300R, SUZUKI GSX-S750, SUZUKI GSR750, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA NM-4, HONDA NC750S, HONDA NC700X, HONDA NC700S, HONDA CBR650F, HONDA CBR1000RR, HONDA CB650F, HONDA CB400SF, HONDA CB400SB, HONDA CB250R, HONDA HORNET900
Vibration reduction effect is only temporary
Mounted on CT110 HUNTER CUB JA55.
I was hoping for a vibration reduction effect, but I think it is only a comforting effect.
I chose Matte Black and it has no Habit and the texture is very nice.
View detail
Fits: KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR1100, KAWASAKI ZRX400II, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR1100 RS
Posh Blinker is the best!
I changed from Plating to Black. It was not so difficult to install. I am very satisfied with the installation, but it has improved my parenthesis a lot. View detail
For off-road motorcycle Mirror Hole Plug
Used for Mirror Hole Plug for off-road motorcycle.
I often remove Mirror when participating in Races, etc., and wanted to prevent mud, etc., from clogging it.
There are many inexpensive Color line nap products, so it would be useful to have a few.
View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1200S, KAWASAKI ZZR1100/ZX-11
The FrontSprocketッs easier to clean and has a better texture.
Cleaning around the front sprocket is easier and always cleanable.
Texture and Cost performance are good.
View detail
subtle
I replaced the blinker of my CB400SB with LED about 3 years ago, but it broke recently. I don't want to use Large Land's product, so I have no choice but to buy this product for my CB400 blinker relay. I would like you to make it more durable. View detail
Fits in with the styling of the Monkey 125
About quality and texture, I can confirm that the quality is great and that the material used is aluminum that is CNC machined to shape and finished with a chrome plated surface. About the feeling of use, Smooth shiny surface with sharp detail that fits in with the styling of the Monkey 125 while also adding some rigidity to the aftermarket handle bars. Products to buy together, Some chrome plated rear shock absorbers like the ones available from Takegawa would be ideal to also add to your cart to help complete the look by removing the original red shock absorbers and adding a firmer ride to the rear end. Difficulty of installation, I can say the fitment of the brace shaft for my installation was very easy due to the ease of access and simple nature of securing the brace to the handle bars with the brace clamps from Posh. Cost performance and comparison with other products, The pricing of the product is great. You receive a brace made from a quality material with a high quality surface finish to match. There are a few options around the same price but most are more expensive and don't have the chrome plated finish I was looking for to match the handle bars. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: KAWASAKI GPZ1100, KAWASAKI GPZ900R, KAWASAKI NINJA250R, KAWASAKI NINJA400R, KAWASAKI NINJA650, KAWASAKI NINJA650R, KAWASAKI Z750, KAWASAKI Z750S, KAWASAKI Z800, KAWASAKI ZEPHYR1100, KAWASAKI ZRX1100, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZX-7R, KAWASAKI ZX-9R, KAWASAKI ZX14R, KAWASAKI ZZR1100, KAWASAKI ZZR1200, KAWASAKI ZZR1400
Totally Match.
Match the Black/Silver body for a clean look.
The weight is a little heavier and although I haven't driven long distances, the vibration is reduced and it feels good!
View detail
the expendables
To be honest, it is just a Rubber, but without it, the Handlebar End cannot be installed.
And once the Bar End is installed, this Rubber part is crushed and fixed, so the Rubber is deformed once it is installed. Therefore, it is practically not reusable. When I reused a Bar End before, only one Bar End fell off and went missing, and I had to repurchase the whole Bar End.
Since then, we always replace the rubber with a new one.
At least, we are selling Rubber Only, Washer Only, and Repair PartsSingle Body.
View detail
Just a Washer.
It's just Washer.
It is just a Washer with 22mm OD, M6 hole, 1.6mm thickness.
I said it twice because it is a Large thing.
We had no choice but to purchase the Bar End because the part in question, which had been stocked, had gone missing.
It may seem that Large is sturdy without it, but in fact, if it is not installed, the Bar End may easily fall off, cannot be firmly fixed, or may interfere with the Throttle.
So it is practically an indispensable component.
It's just a Washer. (Lol)
Considering the price, if you have the time, it is much cheaper to buy the same Size at Home center.
I didn't have Timing to go buy it, so I bought it on webike.
View detail
Stable Products
When MASTER is converted to radipon
I bought this one because I think it fits the s15Tank the best.
It is a special product and fits well with the quintessence of the product!
View detail
Started to hear strange noises from the Number.
It was easy to install, but because the Seat and the Seat are co-tightened together, the Seat almost falls off every time I remove it. Also, after installation, I started to hear a chattering sound from Number, so I put Epu and Sealer on Number to counteract the sound. View detail
It was easy to install
Installation was easy by following the instruction manual. It may be a little dark, but I am satisfied with Large! View detail
Cost performance is the best
I bought K&N for the air cleaner, but I thought that the BreatherFilter did not need to be wet type, so I bought this one. View detail
It contains enough Size for your needs.
I was able to get the setting exactly right. View detail
Indicator lens - excellent
As expected, replacement part fitted perfectly. High quality Posh lens. Only installed the clear lens at this stage, but the Smoke colour looks good in the pack. View detail
Freedom. Hence the jumping difficulty level.
[How is it used?
Front Brake Fluid Tank for a YZF-R6 2016 (13S)
Tank is KawasakiOEM Parts (https://www.webike.net/sd/21984592/)
Fluid is Active's 4.0 or 5.1. Up to the capacity near the MAXLevel.
It should be about 6 years and a little over 60,000 km.
Bent at a rather aggressive angle, like a Landolt ring
Was the one you received as per Image?
The product is exactly as shown in the picture, with simple packaging and contents.
Was the installation difficult?
The installation itself is M6 BoltQuantity:Easy to remove and insert 2pcs.
The product can be bent freely and is designed to be used bent, but it is hard and requires a lot of strength or wisdom.
・Quantity:Pair (for Left and Right) However, if you bend them all at once, the surface will crack in no time and the color of the silver-colored material inside will become visible. The surface cracks in no time, and the color of the silver-colored material inside becomes visible.
How was your experience with it?
Although it was made of aluminum, it was robust enough to support a tank with Fluid up to near MAXLevel.
Although the surface area was torn up during the installation process, the original blue color of the intact areas has not faded, so it appears to be resistant to sunlight.
[Included Parts:were they on?
It is not attached at all. Compared to the flat Bracket, the Bolt may need to be changed to a longer one because of the thickness of the mounting area.
[Was there anything that disappointed you?
No, because the weight has not caused the bending to come down even if it is no-brown.
The surface can be easily roughened by bending with a tool, so the "Large is tough enough" mentality cannot be tolerated. As the product notes, if you want to bend it, it would be better to bend it carefully with bare hands or something, so that it can be installed with its beautiful appearance.
Even if the surface is damaged due to unbrowned bending, the performance as a bracket to support the tank remains and is reliable.
However Bending that preserves beauty." The degree of difficulty of the "Bend" is high and requires delicacy and care. In addition, since it can be bent freely, it is necessary to have Sense to be able to image how to bend and attach it in the best way.
View detail
Fits: KAWASAKI KSR110, KAWASAKI KSR110, HONDA Super Dio, HONDA Super Dio, HONDA Dio SR, HONDA Dio BAJA, HONDA SUPERDioSR, SUZUKI STREET MAGIC 50, Others , Others , HONDA Dio, HONDA SUPERDioZX, HONDA TACTS, Others , HONDA DREAM50
Minus.
The Slotted screwdriver is quite narrow and I had to go out of my way to buy an additional Driver. If you don't have a very narrow Minus, you should not use it.
The quality is normal, so I don't think it's a problem.
View detail