Reviews
Fits: KAWASAKI 750SS Mach IV (H2), KAWASAKI 750SS Mach IV (H2)
They're consumables.
Replaced during Restore.
It is lighter and cleaner than the tired Cable, but not the immensely Large effect, of course. w
No complaints as an item.
Can be used without Trouble
View detail
Fits: KAWASAKI Z1000R, KAWASAKI Z1000 (air-cooled), KAWASAKI GPz1100, KAWASAKI Z1000R, KAWASAKI Z1000J, KAWASAKI Z1000 MkII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000 (air-cooled), KAWASAKI Z1 (900SUPER4), KAWASAKI GPz1100, KAWASAKI Z1000R, KAWASAKI Z1000J, KAWASAKI Z1000 MkII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000 (air-cooled), KAWASAKI Z1 (900SUPER4), KAWASAKI GPz1100
Frame Friendly
The rubber coating makes it hard to scratch the frame It is also resistant to gaps It's a little thing, but it's very effective, and the manufacturer should have done this from the start It's good View detail
Please make and sell them in 5cm increments
I purchased this along with the upgrade of the Handlebar
It is a reliable manufacturer, so I was able to install it without any problems Create and sell them at
It was a bit long and difficult to get around
I don't know the durability in detail as I just installed it
Well, it's a consumable product, so it's safe to replace it as soon as possible
View detail
Fits: KAWASAKI Z1000R, KAWASAKI Z1000 (air-cooled), KAWASAKI GPz1100, KAWASAKI Z1000R, KAWASAKI Z1000J, KAWASAKI Z1000 MkII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000 (air-cooled), KAWASAKI Z1 (900SUPER4), KAWASAKI GPz1100, KAWASAKI Z1000R, KAWASAKI Z1000J, KAWASAKI Z1000 MkII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000 (air-cooled), KAWASAKI Z1 (900SUPER4), KAWASAKI GPz1100
Satisfied with Design
It was a product as I thought. There is no problem with installation and texture is perfect.
Cospa is satisfied well also in terms of price.
Image when I installed it on the car body just like I was satisfied without problems.
View detail
It can not be helped more than nothing
The place confirmed after purchase, the inside was a little rusty.
We reviewed the return, but it took about 5 days from order to arrival, so we did not have enough time to spend time taking the time to exchange again, so we used rust inhibitor inside and divide it inside.
Regarding accuracy, it was not bothering me because I got astringent of movement if I made it two or three times back and forth.
View detail
Fits: KAWASAKI Z1000R, KAWASAKI Z1000 (air-cooled), KAWASAKI GPz1100, KAWASAKI Z1000R, KAWASAKI Z1000J, KAWASAKI Z1000 MkII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000 (air-cooled), KAWASAKI Z1 (900SUPER4), KAWASAKI GPz1100, KAWASAKI Z1000R, KAWASAKI Z1000J, KAWASAKI Z1000 MkII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000 (air-cooled), KAWASAKI Z1 (900SUPER4), KAWASAKI GPz1100
this is good!
Since Clutch Wire was in contact with the Exhaust System, Clamp was required and I bought it. OEM Clamp hurts Frame with just iron. But this Clamp is safe because it is Coating with something like Vinyl. It is a fine product, but it is a good product that understands User's feelings well. View detail
Even small parts will be effective Large
I replaced it with Kawasaki Z1. It is a fine part although it is different in Large because it is always rusting part that is in sight and shining with Plating but it feels good. I changed my answer.. View detail
Rust easy
Plating deteriorated in 1 year and attached Rust came out. I bought a cover under the eaves and parked it. It's like a Parts of Motorcycle back then 40 years ago in one year. View detail
I have eight years..
I have run out for 8 years. Motorcycle leaving the shop 300 m place. I just walked and bought this same one.
If you have 8 years, top etc. is not it. But this time the place was good but I am afraid of cutting at the destination so we are considering hydraulic pressure.
View detail
Satisfied with Cost performance
Because I purchased it in second hand, I used it for one year without knowing when I replaced it before, but because I was worried when I could cut it
I bought Clutch Wire made by PMC.
Clutch work is also lighter and satisfied after installation.
View detail
It is a reliable Brand
Because it purchased with secondhand car, because it is unknown when exchanged
We purchased Clutch Wire made by PMC this time.
Clutch work is lighter and satisfied after installation.
View detail
Reliable Brand
We are using Clutch Wire which was installed at the time of purchase and purchased things made by PMC because it is unknown when we exchanged.
Kurachi Work is also lighter and satisfied.
View detail
It purchased together with the Clutch holder.Although he has been indebted for pmc products very well It diverts from W650 or the parts for W800 with KAWASAKI brand-name parts these days in many cases.It is the kana on which it can compromise if price s
It purchased together with the Clutch holder.Although he has been indebted for pmc products very well It diverts from W650 or the parts for W800 with KAWASAKI brand-name parts these days in many cases.It is the kana on which it can compromise if price setting out is lowered to a slight degree although it will probably be harsh to ask Replace parts for brand-name-parts quality? View detail
If it was Z system, the Matching with the time-tested Handle made from Z Parts was OK. I think that Size Exactlies are satisfactory goods by this Handle. However, the direction of brand-name parts seems to be reliable too. It is dependent on a Mai
If it was Z system, the Matching with the time-tested Handle made from Z Parts was OK.
I think that Size Exactlies are satisfactory goods by this Handle.
However, the direction of brand-name parts seems to be reliable too.
It is dependent on a Maintenance and a turning point is likely to come out in durability.
View detail
Since having used until now is rusty and it always entered within the field of view during operation, it was worrisome.It was good to change too.
Since having used until now is rusty and it always entered within the field of view during operation, it was worrisome.It was good to change too. View detail