Reviews
Helmet
The price is not cheap, but it is quite easy and nice to be able to do it easily to Helmet lock.
It doesn't look too bad, although the extra Key is a hindrance.
View detail
That's pretty good!
I replaced the OEM Helmet holder because it was difficult to use.
The Plating matches the Handlebar very well and makes it very easy to lock the Helmet when leaving the Motorcycle.
It was the right purchase.
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
Supply of raw parts of old vehicles Thanks!
Thank you for supplying finer parts of old car.
Although it may be Refreshing if it does not have an appearance, I think that it is a handy part if there is.
The shape is also faithful? Do not touch the paint film surface, surely Tight!
It does not get in the way.
I would like to continue to compile each Lineup widely in the future.
I'm happy that it's a bit cheaper, and it's easy to handle with ease.
View detail
good
Large size did not fit a little with CB 400 SB, but if you tighten it tightly you will not loosen and you can set the mounting position freely and Helmet lock is easy.
View detail
It is functioning as Combination Nifrek
PCX does not have Combination Nifrek. Seat is also narrow. I use it for Combination Nifrek for a bit of shopping. I installed it in HandlebarCenter, but it was mounted only diagonally. But as Combination Nifrek I am satisfied because it works properly. View detail
I am satisfied..
Can be installed in GSX-S1000. The thickness of the Handlebar or Mirror part could be installed.
It is near OEM's Tandem Footpeg, but the installation position is a matter of preference.
I think universal nature is a good product with high quality.
View detail
Satisfied with Cost performance
The vehicle is Honda PCX.
I used an OEM, but installed it hard to use.
Making is solid and good.
Recommended for those who are looking for a Helmet holder.
View detail
Recommendation!
Purchase referring to everyone's impression!
Recommendation can be done with the expected use feeling (^^)
I wonder if the price is cheaper a little more
★ I will make it 4!
View detail
It's user-friendly!
It is attached to HORNET 250.
HORNET has a Helmet holder, but I purchased it because it is hard to use at footpeg side.
Because it hangs Helmet on Mirror for a moment, you can lock it with Mirror hanging on this Helmet holder so it is very convenient to use.
View detail
A place is not taken to attachment, but it is compact, and structure is also good.In addition, a price is also cheap.There seem to be few Platings and worries about it being thick and rusting.I think that it is a good article.
A place is not taken to attachment, but it is compact, and structure is also good.In addition, a price is also cheap.There seem to be few Platings and worries about it being thick and rusting.I think that it is a good article. View detail
The Helmet holder was attached to the Handle of Monster S4R Testastretta. The thing of a pure Wire type is user-unfriendly. Since directions did not know whether it says, it decided to attach a general-purpose Helmet holder.The Handle has been s
The Helmet holder was attached to the Handle of Monster S4R Testastretta.
The thing of a pure Wire type is user-unfriendly. Since directions did not know whether it says, it decided to attach a general-purpose Helmet holder.The
Handle has been satisfactorily attached, although it was an Aluminum Taper handle of the AELLA.
After all, since D pipe extended far back by the product made from AGV, the Helmet was difficult for hooking on
direct Holder.Since it is
, it is another, and is purchasing and using the Wire.Since
frequency in use is low, it is not worrisome in particular.
Is the point to worry only that a Tank and a Holder are likely to interfere?
View detail
It attached to the Handle.It is rather good-looking and satisfied.However, it would be better, if the key plug mouth had a lid when it could do! Isn't it a burr well?
It attached to the Handle.It is rather good-looking and satisfied.However, it would be better, if the key plug mouth had a lid when it could do! Isn't it a burr well? View detail
Appearance and handling are also good and is good goods.Since a lock is made into the Mirror where a Helmet is hung, I do purchase of and think that it was good.Attachment is also easy and it does not say it.By all means, they are recommended good
Appearance and handling are also good and is good goods.Since a lock is made into the
Mirror where a Helmet is hung, I do
purchase of and think that it was good.Attachment is also easy and it does not say it.By all means, they are recommended goods.
View detail
Since a pure Helmet holder is equal to there being nothing, it is looked for variously and purchases reputable Colet. Considering the price, structure is solid. Appearance of plating treatment is not bad at a so so Beauty, either. It fully plays a role
Since a pure Helmet holder is equal to there being nothing, it is looked for variously and purchases reputable Colet. Considering the price, structure is solid. Appearance of plating treatment is not bad at a so so Beauty, either. It fully plays a role of a Holder. A Recommendation is carried out. It is especially to the direction (smile) of RC42. View detail
[ -- the Webike Monitor ] -- since the Damage appeared in the Belt of the Helmet when attached to the pure Helmet holder, purchase of was done. Since the Motorcycle which has ridden was a Separate handle, it was not attached to the
[ -- the Webike Monitor ]
-- since the Damage appeared in the Belt of the
Helmet when attached to the pure Helmet holder,
purchase of was done.
Since the Motorcycle which has ridden was a Separate handle, it was not attached to the
Handle.
Since the side of the sheet was looked for since it was
, but there was no portion which he gets hooked well and there was no
method, the thin place was equipped.
Since it is
, it is a form where it is hanging down, but those where the Helmet is on the Motorcycle of
Separate handle satisfied since there is a fixable place need to take care.
It is
GSX-250S KATANA.
Since it was not able to fix firmly, they are four stars.
View detail
[ -- the Webike Monitor ] , although the pure Helmet holder was used until now, Since it taking time and an Inner were suitable beside upper or because of the place currently attached, the rainy day was user-unfriendly, but it was the favor of this H
[ -- the Webike Monitor ]
, although the pure Helmet holder was used until now,
Since it taking time and an Inner were suitable beside upper or because of the place currently attached, the rainy day was user-unfriendly, but it was the favor of this Holder, and since the Mirror was covered and use was completed, considering the price, it was found useful.
View detail
Although it had ridden on the HORNET250, since it is and was hard to use a pure Holder for the position of remarkable Shimo of a Motorcycle side face, he bought this product. It was used near the Handle, having installed and fixation of the Helmet became
Although it had ridden on the HORNET250, since it is and was hard to use a pure Holder for the position of remarkable Shimo of a Motorcycle side face, he bought this product.
It was used near the Handle, having installed and fixation of the Helmet became somewhat easy.
When the Helmet was hung on the Motorcycle side face till before again, it might be damaged [ Does the next Motorcycle strike on a Helmet occasionally? ], but by using this, installing it near a Handle, he feels easy near a Meter and can fix a Helmet.
View detail
It is attachment to APE100. Since it was hard to attach the Folder of the pure rear part and troubles were always suffered, this product was purchased. It became easy to cover a Helmet in the little case. (it is disagreeable that a Key i
It is attachment to APE100.
Since it was hard to attach the Folder of the pure rear part and troubles were always suffered, this product was purchased.
It became easy to cover a Helmet in the little case.
(it is disagreeable that a Key increases.)
.
.
This is unavoidable.
View detail
It attached to the Handle clamp. Although the Helmet was only put on the Mirror until now, since it was able to come to attach a key, a fear of being stolen also disappears and it is very convenient. It is a total loss if the Belt of a Helmet
It attached to the Handle clamp.
Although the Helmet was only put on the Mirror until now, since it was able to come to attach a key, a fear of being stolen also disappears and it is very convenient.
It is a total loss if the Belt of a Helmet is cut also with
(;'Д`A).
View detail
Functionally, they are goods of a cinch. It attached to the Engine guard. Although stopped on a Screw at the time of attachment, the direction of a Nut idles and it cannot shut strongly. possibly -- this individual -- かもしれませ -- although ...
Functionally, they are goods of a cinch. It attached to the Engine guard. Although stopped on a Screw at the time of attachment, the direction of a Nut idles and it cannot shut strongly. possibly -- this individual -- かもしれませ -- although ... View detail