Reviews
Since a helmet holder is standard to FZ1 and is not attached to it, they are necessaries. Since it was disagreeable that hung on a side and a crack was attached to a helmet, here where it is attached to a handle was chosen. User-friendliness is al
Since a helmet holder is standard to FZ1 and is not attached to it, they are necessaries.
Since it was disagreeable that hung on a side and a crack was attached to a helmet, here where it is attached to a handle was chosen.
User-friendliness is also good.
View detail
Since a helmet holder is standard to FZ1 and is not attached to it, they are necessaries. Since it was disagreeable that hung on a side and a crack was attached to a helmet, here where it is attached to a handle was chosen. User-friendliness is al
Since a helmet holder is standard to FZ1 and is not attached to it, they are necessaries.
Since it was disagreeable that hung on a side and a crack was attached to a helmet, here where it is attached to a handle was chosen.
User-friendliness is also good.
View detail
Since a helmet holder is standard to FZ1 and is not attached to it, they are necessaries. Since it was disagreeable that hung on a side and a crack was attached to a helmet, here where it is attached to a handle was chosen. User-friendliness is al
Since a helmet holder is standard to FZ1 and is not attached to it, they are necessaries.
Since it was disagreeable that hung on a side and a crack was attached to a helmet, here where it is attached to a handle was chosen.
User-friendliness is also good.
View detail
operation turns a key, when removing a helmet from Locke -- it is accepted and is satisfactory during a run of ! after that also at a lock released condition -- it is . Therefore, when acting as Locke of the helmet, it lets a ring pass in a holder, an
operation turns a key, when removing a helmet from Locke -- it is accepted and is satisfactory during a run of ! after that also at a lock released condition -- it is .
Therefore, when acting as Locke of the helmet, it lets a ring pass in a holder, and as the holder of a release state is pushed in.
Compared with a hell lock cable former personal identification number type, helmet attachment and detachment become easy far, it becomes unnecessary to equip with -> store Locke at a handle at every time, and Locke at each time became less troublesome.
View detail
It's expensive.
I bought this last time and the texture is very good. View detail
Good lock
I help my friend to buy it. It seems as universal for most of the motorbike. My friend use it on YS250 and fit for it. The texture of this lock is hard. Seems not to bad. My friend use it very successfully. View detail
Okay
I helped my friend to bought it. I am using the Japan brand kitaco but however that is not fit to my friend motorbike, so I bought this because it is universal one. It is made in Taiwan, so I think it is expensive, I think if I bought it in Taiwan it will much more cheaper. It is heavier than my kitaco lock. However the lock is very tight, so when u lock it, use need to give more power to lock. It seems more trouble and can not lock quickly. Anyway, the good thing is this include three key. View detail
It is easy to use product
Since the Helmet lock of the KSR which I am on now is in a place where it is very hard to use, I bought this Universal Product here.
Although I was satisfied with the functional aspect, it was better not to personally Plating, so I thought that if you dropped the price without plating it would be saved.
View detail
You can now keep Helmet on Tank
Busy at VERSYS of Kawasaki.
Helium hook attached to the car from the beginning must bother to use Seat unless it is inconvenient because it can not be used,
I had this installed before car delivery.
When attached to Left Side 's Handlebar, just as Helmet is fixed on the top of the tank
Helmet inside will not get wet if it rains somewhat.
When you stop by Convenience, you do not have to bother to take the full face helmet and take it convenient..
View detail
Easier to use than OEM
I use it for ZX-12R using Pipe Handlebar. Standard Equipment's Wire type lock was very hard to use and I did not use it, so I bought this item.
Installation is easy and is completed if it is 10 minutes.
View detail
Excellent which can fix Helmet on Handlebar
Attaching a Side case holder etc. to SEROW and its brothers may interfere with existing Helmet holders and be unusable in some cases, but it is useful for such cases.
High texture and beautiful appearance.
Fixing the Helmet, you will not have to squat down next to the Motorcycle, it's comfortable.
View detail
Helmet is handy and convenient in Motorcycle
【What made you decide the purchase?】
The fact that there were many VTR attachment articles of this product and Cost performance.
Because the Mounting Bolt becomes inside of the hook when Helmet is fixed, it becomes difficult to remove, so that theft concerns are alleviated.
【How was it actually used?】
As you know, the Helmet holder of the VTR is a Wire type, and it was not possible to use it unless Seat was removed one by one. Still I was using it when I was a new car, but as I got troubled and walked with Helmet...
My hands stopped, I dropped Helmet's Parts twice, and it was released from that.
With the following installation method, it will not get in the way, Helmet can also leave Motorcycle with hands without soiling.
I have used it for over a year, but it also has no rust. Although there are times when it is not applied to the rain.
【Was it difficult to install? (Hard parts case)】
A bit of ingenuity is necessary to pinch in front of the master Cylinder. Feeling to slide from HandlebarCenter.
【Please tell me the installation point and hang】
As shown in the picture, install Hook up. When using it multiplies Mirror by Helmet and multiplies Strap's Ring to Holder.
The difficulty is that Strap Ring does not reach the Holder unless Mirror is bent to the front, and Mirror must be readjusted before running.
[Is there anything I was disappointed about?]
As expected!
【Hope for Manufacturer - Please let me know if you have any improvement points]
Nothing in particular. It was a good product for me.
【Have you compared items?】
nothing special.
View detail
It was convenient..
Since there is no Helmet Furuda in YAMAHA XJ 6 F, I tried to attach this product which is a Universal Product. In the state I bought, Bike 's Pipe was too thick and I could not use the included Bolt, so I bought and purchased a 30 mm Bolt at Home center. It was installed in an inconspicuous position without disturbing the foot.
Helmet holder is useful because it is necessities in Touring.
I used it for 1 year but Plating is durable in Large. However, Key hole seems to be rusty so I regularly rust it.
We also sold exclusive items by car model, but it was necessary and enough with a cheap Universal Product.
View detail
Convenient
When purchasing a little shopping with PCX, it was troublesome to open Seat and store Helmet, so I bought this product.
Since it is attached to the Handlebar, it is convenient for Large to be able to support Helmet immediately.
Shopping bag etc at SUPER etc. You can also hang.
View detail
It is Repeater
I use it every time I purchase Motorcycle.
This is the third purchase.
It is very convenient to wear it in Handlebar.
Just put the Helmet on the Tank from the middle of the Handlebar and lock it, the shape is also easy to use.
There is a heavy feeling so, it is solid.
While running, it is better to close it as Chatter sound comes out with vibration as it is opened.
Just place it on Mirror or Tank, you are worried about falls and theft, so it is safe to wear it.
View detail
Product made from metal n chrome. Fixture are so simple and attactment are easy. Holds helmet securely and safe from stolen. Additional great product to be installed to the handle bar for easy excess rather than opening the seat or tying your helmets at r
Product made from metal n chrome. Fixture are so simple and attactment are easy. Holds helmet securely and safe from stolen. Additional great product to be installed to the handle bar for easy excess rather than opening the seat or tying your helmets at risk of getting stolen. View detail
It uses as a Convenience hooks at the time of a Helmet holder and entrainment at the time of alighting. They may be necessaries at PCX. Although it was worrisome at the time of attachment what a Clamp part cannot open easily, and that a Rubber shifts simp
It uses as a Convenience hooks at the time of a Helmet holder and entrainment at the time of alighting. They may be necessaries at PCX. Although it was worrisome at the time of attachment what a Clamp part cannot open easily, and that a Rubber shifts simply, it was immediately attached with one Screw. View detail
It was used having attached to GSR400. When pure, the sheet had to be removed, and since it was troublesome, it purchased. It was used having attached to the Handlebar and contributed to crime prevention & convenience.
It was used having attached to GSR400.
When pure, the sheet had to be removed, and since it was troublesome, it purchased.
It was used having attached to the Handlebar and contributed to crime prevention & convenience.
View detail
Although several sets are changed, it uses about. The inner Rubber portion is removed by the Harley sportster now [ ]. Locke can be simply carried out to it, covering a Helmet over a Mirror, and since texture is also very best, a feeling of a physic
Although several sets are changed, it uses about.
The inner Rubber portion is removed by the Harley sportster now [
].
Locke can be simply carried out to it, covering a Helmet over a Mirror, and since texture is also very best, a feeling of a physical disorder is not.
I think that it will arrange according to a device if it is a round pipe-shaped place although I think whether there is also any vehicle type with difficult
attachment.
View detail
Although KTM200DUKE2013 MODEL was purchased, there is no Helmet holder and I thought whether it would be inconvenient and there would be any anything. A PMC general-purpose Helmet holder is found and a price is also a price at the super-time. It pur
Although KTM200DUKE2013 MODEL was purchased, there is no Helmet holder and I thought whether it would be inconvenient and there would be any anything.
A
PMC general-purpose Helmet holder is found and a price is also a price at the super-time.
It purchased immediately.
It is the attachment OK in the little crevice between the
Handles simply!
Since the Helmet can be placed at little time, it is very convenient.
View detail