Reviews
Dress Up Parts
The shape is my favorite of the long tail cowl that's out now Not too long and not too thin
It's a four-point stopper, so when stopping the Bolt, make sure to tighten it a little at a time
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPZ750R
Overcome weakness
Easy to install, just apply Grease to the O-ring and plug it in. Approximately 1 cm of Plug cord Cut is required for the Plug cord coating and copper wire to become Tsurishi. It was easy to understand with handling Instruction Manual. View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
Supply of raw parts of old vehicles Thanks!
Thank you for supplying finer parts of old car.
Although it may be Refreshing if it does not have an appearance, I think that it is a handy part if there is.
The shape is also faithful? Do not touch the paint film surface, surely Tight!
It does not get in the way.
I would like to continue to compile each Lineup widely in the future.
I'm happy that it's a bit cheaper, and it's easy to handle with ease.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
Replace the Rubber parts as they deteriorate.
OEMParts is not used as a result of deterioration, purchased by preventing falling off of Side cover.
Soft and Fit feeling is also good.
RiproParts should be easy to get out of print. After that I would like to see how it is using durability.
View detail
Hose classes are consumables
I exchanged because the used Hose has become harder with hardening. It was exactly the same as cutting the length to just two.
We recommend that you exchange before Trouble comes down, as it deteriorates.
View detail
good
OEMHookMount is made of iron Simple It's too simple and it does not seem like it's sexy.
PMC's Rear suspensionMountHook emphasizes Design property there, Hook part Aluminum, Screw part enhances luxury as iron.
What is the most noticeable place, so the effect is Large?
By the way, 1pc. The weight of OEM 49g PMC 29g.
View detail
Same as OEM
Sprocket's Flange nut. I also searched for Nut of the same shape not for Motorcycle, but because it does not change much, buy it here.
Lock nut so it will not be loose.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPZ750R
As well as midsummer ...
I got an Oil Temperature Meter and knew the temperature of the Engine by a number, I knew, but since the oil temperature is quite high except for driving, I thought that it would be better to lower even a little.
Since installation is Harnesson, I think that it can be understood with the paper of the manual, because it is WhiteBlack, there is a person who carries a procedure in a color easily by net search if you do not know.
You can install it only if Tank, Seat and Seat side cowl are removed..
Although others were also listed, Harness in Cowl gets hands if you just remove Inner! But it's quite narrow, so be careful not to make scratches on your arms etc..
Switch, but when it is attached to HandRight Side, it is still not long enough. I extended it, but if I can not do it, please install the Switch box near the Center or recommend a place other than Hand.
Wiring extension work also Quantity : Because it is only 2 pc, it can be done easily, but ...
Although it is performance, it is not necessarily a sharp drop in midsummer traffic jam, signal wait, wait for a signal, please think that it is enough to keep the temperature going up. Even when the fan revolves, since the hot air will stay on the engine side, I think that it will cool down more efficiently, considering the way to pull out the wind well.
View detail
It is better not to have rust.
It is a part that I usually do not mind, but I did not like the rust which I care about when I suddenly, so I made it a brand new item. It's not casual, but it's quite crouching so I have never gone to a new one. View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
Required to install Z2 Tail
Purchase necessary to install Z2 Tail lamp to Normal fender of ZEPHYR 750.
It was relatively easy to install and we could install it in about 15 minutes.
Just a small part of Large protruded from the Tail lamp and a semicircular Aluminum Ground was seen from behind, I think that it was good if the color was a black color because the appearance is a bit concerned.
Also, NORMAL's Tail lamp is designed to prevent dust and water from entering the Tail cowl in Rubber's Packing, but as this creates a gap without closing after NORMAL is removed, the entry of dust and water It is about to become.
The price was a little expensive so I got lost.
View detail
Excellent atmosphere
To install it requires an optional Bracket Kit but you can install it with Small processing, the finish is Z2 pockety feeling.
Just Valve of Tail lamp of ZEPHYR 750 is Quantity : 2pc. It is bright with Set, Valve of this product is 1pc. It's only dark so visibility is somewhat concerned.
View detail
And one more step!
This time it will be the third purchase. In other words, it has difficulty in durability, but I bought it because it is easy to ask for.
In the first two, the needle moves but the mileage does not move. The direction of the mileage is still 100 kilometers this time, but I do not know, but at the time of installation "Two Screws on the Meter side did not delicately match the holes in Bracket" This is my first time. Processed and installed but because Nut was not shimmering to the end, it floated only a little.
View detail
Recommended in Universal's Rear Sets
I searched Universal's Rear Sets in various ways, but both installation and design are good. Evaluation is divided for products of PMC, but this product does not feel a problem in particular. Just a little expensive so if you buy Sale time
It is recommended.
View detail
good
Large size did not fit a little with CB 400 SB, but if you tighten it tightly you will not loosen and you can set the mounting position freely and Helmet lock is easy.
View detail
It will be quite easy!
The installation itself is simple
Throw adjustment became very easy!
Although the carburetor gap is also a considerable Motorcycle, it is a part I wanted, but I thought it was really necessary? I thought it was a good month but first I gave it a little but the rotation of Dial became very light and it is very easy to adjust Throw right away good!
Just being able to install only on the Cook side as Length is not enough that the Wire is too short on the other side
Quantity : Pair (for Left and Right) I thought privately that there would be Lineup to choose
Similarly if you buy someone who is eager to purchase it is one of the parts that can be installed and mistakenly Recommendation!
View detail
very satisfied
I tried this product because Spring is downs and I raise Side Stand and it gets a glaze.
Spring's tension also improved and I could improve it.
By the way, Side Stand uses Small version of Z1 thing.
View detail
Fits: KAWASAKI Z1000J, KAWASAKI Z1000R, KAWASAKI Z1100R, KAWASAKI Z1100GP, KAWASAKI Z1100R, KAWASAKI Z1100GP
It can be used without problems!
I used it for the offset adjustment of 520 Conversion of z 1000 j.
Installation accuracy was not problem at all.
I will purchase again if I have the opportunity.
View detail
Fits: KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750
Spec of car body. I appreciate being able to adjust according to!
Although it used it from before, it is intense due to aged deterioration, and it was replaced with a new one.
As long as you are using it for a long time, the pinched portion to the car body gradually spreads (See photo).
The STAND adjustment part also distorted slightly in Color.
Lengths of ± 20 mm each have a Spec. It is appreciated because the adjustment is effective for the change, but it is saved personally if the adjustment range is a little wider.
I made clogs on processing.
Quantity : To use with 2pc eyes is a satisfactory product overall.
View detail
It is functioning as Combination Nifrek
PCX does not have Combination Nifrek. Seat is also narrow. I use it for Combination Nifrek for a bit of shopping. I installed it in HandlebarCenter, but it was mounted only diagonally. But as Combination Nifrek I am satisfied because it works properly. View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
Performance is very good, but ,,,
When cp 2696 is used in combination with the STD Disc Rotor, the Rotor must be scraped by about 1 mm as it gets in contact with the Outer tube. I can not understand why it was designed without considering the combination with cp 2696. Were not you able to make Small the outside diameter of Outer tube a bit more? View detail