Reviews
Fits: KAWASAKI Z900 (KZ900), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000 MkII, KAWASAKI Z1000 (air-cooled), KAWASAKI Z750 (air-cooled)
Z1R
We replaced it with an external MagTanWheel at the same time. It may not look the same at a glance, but I think my car is happy when the details are cleaned up. View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
z1 Hub damper
The z1 Rear hub had rattled and was replaced with this product.
There were no problems with installation, etc., and the rattles are gone without a hitch.
View detail
Fits: KAWASAKI Z800, KAWASAKI Z900 (KZ900), KAWASAKI Z1000 (air-cooled), KAWASAKI Z750 (air-cooled), KAWASAKI 750SS Mach IV (H2)
It can be used without problems
There is no snagging, etc., and it works normally.
I think that the quality of the bearing depends on the degree of low wear. I think it can be used without any problem as long as it rotates well and does not get stuck, but what do you think?
At any rate, it's a normal good one with no Trouble!
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI 750SS Mach IV (H2), KAWASAKI W3/650RS, KAWASAKI 750SS Mach IV (H2), KAWASAKI W3/650RS
be extremely thorough, focusing on even the finest of details
It is sometimes necessary to convert an old car to a front double.
In our case, we put it on MACH.
It is nice to have these parts available without having to make them at One-off!
View detail
After all, Bearing is LLUType.
I think it is just as described in the product description. I bought this Bearing because I don't expect it to be durable. 1 unit is Quantity:I love that it's a Set! View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
compared with other companies
I thought that all Reproducts were made in the same factory, but now I realize that this is not the case. View detail
Motorcycle shop recommendations.
I bought this because I remembered that when I changed the Bearing of Steering from Open Type to this kind of Bearing at Motorcycle shop, they recommended me to change the Bearing of undercarriage from Open Type to this kind of Bearing.
good point
There is no damage to Bearing by gravel like Open Type.
The movement of the Wheel naturally becomes smooth, too.
Maintenance is easy.
A bad point
● No, there is only Merit.
The Bearing issue is something that I wanted to see improved in the OEM Product.
It's true that when I changed the bearing and saw the old bearing, I was surprised to find gravel mixed in with it (laughs).
View detail
Fits: KAWASAKI Z1100R, KAWASAKI Z1000R, KAWASAKI Z1000J, KAWASAKI Z1100GP
Standard design that blends in with old cars.
I've always thought that I couldn't miss the wheel replacement on my 80's Super BIKE Custom, and although there were many options, I chose PMCSORD/Heritage.
I just chose Rear first for the Rim width and Front with the same type, but of course, I also considered the design.
The old Campagnolo-style 5 Spoke is a classic design that blends in with the old car and I personally love it.
The construction method of this product is Aluminum forging, but I think that it is high spec enough compared to NORMAL, and the cost performance is also good.
Unfortunately, I haven't run it in real life because of all the rain since it was installed, but I think it probably won't disappoint.
View detail
Fits: KAWASAKI Z1000 (air-cooled), KAWASAKI Z750 (air-cooled), KAWASAKI Z750FX, KAWASAKI Z900 (KZ900), KAWASAKI Z1000 MkII
I wanted to make the rear tire bigger than I've always wanted
I wanted to wear Limit's Size 150 in NORMAL Swing Arm and replaced it Chain is Limit in exchange for 530 The handling became very light View detail
Fits: KAWASAKI Z1000 (air-cooled), KAWASAKI Z750 (air-cooled), KAWASAKI Z750FX, KAWASAKI Z900 (KZ900), KAWASAKI Z1000 MkII
Installation is fine
The construction is good But the paint film is a little thin or weak Also, I have to install the Front Fender before I can get the Fender to work View detail
Very good
The finish is remarkable, unless you don't like the three-part Axle Shaft construction Mast bye Items
It may be necessary to change the diameter of Axle Shaft depending on the spec. of the wheels and forks used It is a part that will be It's very helpful to have it on sale at this price
View detail
Fits: KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000 , KAWASAKI Z750-D1 (KZ750D), KAWASAKI Z750FX, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1-R/Z1-RII
For color fixing
For dust protection and water proofing, non-contact rubber seal type bearing is used I don't think it doesn't matter much if you have a seal or not Collar will be installed
If this Seal is stupid, it will be very irritating when putting on and taking off the Wheel, so I will replace it The good news is that the
View detail
Fits: KAWASAKI Z750FX, KAWASAKI Z1000 MkII, KAWASAKI Z900 (KZ900), KAWASAKI Z750 (air-cooled), KAWASAKI Z1000 (air-cooled), KAWASAKI Z750FX, KAWASAKI Z1000 MkII, KAWASAKI Z750FX, KAWASAKI Z1000 MkII
good
I installed it in my Kawasaki Z series
It was discount time, so I was able to purchase it at a fairly low price
There are two color choices, and the design is good for Parenthesis and Cost Performance is adequate
It would have been better if there was a dedicated Drum brake on the LineUp 。
View detail
Fits: KAWASAKI Z750FX, KAWASAKI Z1000 MkII, KAWASAKI Z900 (KZ900), KAWASAKI Z750 (air-cooled), KAWASAKI Z1000 (air-cooled), KAWASAKI Z750FX, KAWASAKI Z1000 MkII, KAWASAKI Z750FX, KAWASAKI Z1000 MkII
good
I installed it in my Kawasaki Z series
It was discount time, so I was able to purchase it at a fairly low price
There are two color choices, and the design is good for Parenthesis and Cost Performance is adequate
View detail
Fits: KAWASAKI Z1000 (air-cooled), KAWASAKI Z1000 (air-cooled)
That's it!
Although making can not be helped by price, there is about twice the folding of Center compared with OEM Product There is a possibility of hitting Seal part of Meter gear! View detail
AXLE BAD FIT! Chromoly Axle Shaft
TERRABLE FIT - THREADS ON EACH END TOO SHORT, WASTE OF MONEY!! THIS IS THE FIRST TIME I HAVE HAD A BAD ITEM FROM WEBIKE, I HOPE FOR A REFUND. View detail
Fits: HONDA CB1100F, HONDA CB750F, HONDA CB900F, HONDA CB900F, HONDA CB750F, HONDA CB1100F, HONDA CB900F, HONDA CB750F, HONDA CB1100F
Support is terrible
As a product Body it is not possible without impossibility, I think whether it will be a price.
However, if there is no Instruction Manual besides the notice of Pereaich, there is no more list of contents to be bundled.
There is no Instruction Manual to Contact Support, it ends with.
In addition, it describes that OEM's Dust Seal can be used for product description, but it can not be installed for CB 750 F.
Retainer's Screw mountain is not cut, and it can not fit in Dust Seal Single Body.
Even if it contacts Support, answer that please use OEM at the copy of the sentence late reply late description.
People who dislike bare sticking need to measure Size and find and purchase Dust Seal on your own.
I wonder if I can not attach Dust Seal of about 200 yen to 1 pc 100,000 items?.
View detail
Fits: HONDA CB900F, HONDA CB750F, HONDA CB1100F, HONDA CB900F, HONDA CB750F, HONDA CB1100F, HONDA CB900F, HONDA CB750F, HONDA CB1100F
Support is terrible
As a product Body it is not possible without impossibility, I think whether it will be a price.
However, if there is no Instruction Manual besides the notice of Pereaich, there is no more list of contents to be bundled.
There is no Instruction Manual to Contact Support, it ends with.
In addition, it describes that OEM's Dust Seal can be used for product description, but it can not be installed for CB 750 F.
Retainer's Screw mountain is not cut, and it can not fit in Dust Seal Single Body.
Even if it contacts Support, answer that please use OEM at the copy of the sentence late reply late description.
People who dislike bare sticking need to measure Size and find and purchase Dust Seal on your own.
I wonder if I can not attach Dust Seal of about 200 yen to 1 pc 100,000 items?.
View detail
Fits: KAWASAKI Z1000 (air-cooled), KAWASAKI Z1000 (air-cooled)
It was a product as I expected
It was a product as I thought. There is no problem with installation and texture is perfect.
Cospa is satisfied well also in terms of price.
Image when I installed it on the car body just like I was satisfied without problems.
View detail
Exchange from Rust of Rusty Rust
I purchased it for Replacement from Rim of Rusty Rust. The condition of Plating well and accuracy is no problem. When the foot is tight, the whole looks better. Exchange is a trouble but it is worth doing so it is recommended. View detail