Reviews
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z2 (750RS/Z750FOUR)
OEMFootpeg Rubber due to discontinuation
Used on KawasakiZ1.
We replaced the OEM footpeg with a footpeg when we converted the OEM footpeg to a reverse-engineered footpeg, commonly known as a Geronimo footpeg.
When using a footpeg, attach the rubber to the vehicle after the footpeg is attached to the vehicle body so that the direction of the footpeg is not gapped.
Also, be sure to use adhesive when attaching to Footpeg.
View detail
Fits: KAWASAKI Z800, KAWASAKI Z900 (KZ900), KAWASAKI Z1000 (air-cooled), KAWASAKI Z750 (air-cooled), KAWASAKI 750SS Mach IV (H2)
It can be used without problems
There is no snagging, etc., and it works normally.
I think that the quality of the bearing depends on the degree of low wear. I think it can be used without any problem as long as it rotates well and does not get stuck, but what do you think?
At any rate, it's a normal good one with no Trouble!
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI 750SS Mach IV (H2), KAWASAKI W3/650RS, KAWASAKI 750SS Mach IV (H2), KAWASAKI W3/650RS
be extremely thorough, focusing on even the finest of details
It is sometimes necessary to convert an old car to a front double.
In our case, we put it on MACH.
It is nice to have these parts available without having to make them at One-off!
View detail
Fits: KAWASAKI Z1000 (air-cooled), KAWASAKI Z750 (air-cooled)
You can taste the effects, but …
You can taste the effect, but be careful because Tandem is deprecated!
I feel like I can tandem it, since it doesn't seem to lack strength from what I can see, but…
It would be nice to be able to taste the Lay-down effect without welding!
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
compared with other companies
I thought that all Reproducts were made in the same factory, but now I realize that this is not the case. View detail
Fits: Others For KYB36Z, その他 For KYB36Z, その他 For KYB36Z
Webike's response to returns and exchanges is still the worst.
I contacted them with photos and explanations as per Webike's return/exchange procedure, but they have yet to reply to any of my emails. But I still haven't received a single reply. I contacted PartsManufacturer directly because Webike is not reliable, and they sent me a replacement part free of charge the next day. View detail
Processing required.
I installed it because the Chain was interfering with the Swing Arm due to the Ronsui conversion. No problem after installation, I can drive without stress! View detail
Fits: KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000 , KAWASAKI Z750-D1 (KZ750D), KAWASAKI Z750FX, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1-R/Z1-RII
For color fixing
For dust protection and water proofing, non-contact rubber seal type bearing is used I don't think it doesn't matter much if you have a seal or not Collar will be installed
If this Seal is stupid, it will be very irritating when putting on and taking off the Wheel, so I will replace it The good news is that the
View detail
Fits: HONDA CB1100F, HONDA CB750F, HONDA CB900F, HONDA CB900F, HONDA CB750F, HONDA CB1100F, HONDA CB900F, HONDA CB750F, HONDA CB1100F
Support is terrible
As a product Body it is not possible without impossibility, I think whether it will be a price.
However, if there is no Instruction Manual besides the notice of Pereaich, there is no more list of contents to be bundled.
There is no Instruction Manual to Contact Support, it ends with.
In addition, it describes that OEM's Dust Seal can be used for product description, but it can not be installed for CB 750 F.
Retainer's Screw mountain is not cut, and it can not fit in Dust Seal Single Body.
Even if it contacts Support, answer that please use OEM at the copy of the sentence late reply late description.
People who dislike bare sticking need to measure Size and find and purchase Dust Seal on your own.
I wonder if I can not attach Dust Seal of about 200 yen to 1 pc 100,000 items?.
View detail
Fits: HONDA CB900F, HONDA CB750F, HONDA CB1100F, HONDA CB900F, HONDA CB750F, HONDA CB1100F, HONDA CB900F, HONDA CB750F, HONDA CB1100F
Support is terrible
As a product Body it is not possible without impossibility, I think whether it will be a price.
However, if there is no Instruction Manual besides the notice of Pereaich, there is no more list of contents to be bundled.
There is no Instruction Manual to Contact Support, it ends with.
In addition, it describes that OEM's Dust Seal can be used for product description, but it can not be installed for CB 750 F.
Retainer's Screw mountain is not cut, and it can not fit in Dust Seal Single Body.
Even if it contacts Support, answer that please use OEM at the copy of the sentence late reply late description.
People who dislike bare sticking need to measure Size and find and purchase Dust Seal on your own.
I wonder if I can not attach Dust Seal of about 200 yen to 1 pc 100,000 items?.
View detail
Do you check the foil Bearing?
Do you check the foil Bearing?
From PMC Wheel Bearing (ZZ Type) The chose.
You can rest assured that our products are made by FOR JAPAN MODEL Manufacturer.
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
Clearing work is quite for upper classes. It is quite serious to extract, if a pure Sleeve shines just now. If it was a town riding grade compared with the Bearing Kit of company, there was no difference in particular that can be felt. Once it carr
Clearing work is quite for upper classes.
It is quite serious to extract, if a pure Sleeve shines just now.
If it was a town riding grade compared with the Bearing Kit of
company, there was no difference in particular that can be felt.
Once it carries out a Grease up to a year, it is maintainable enough.
When a spread is merely considered, it is a place with which it seldom tampers, and since time and effort is also taken, the direction of a Bearing Kit is recommended.
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
It is a three stars to the price for a [Webike monitor]. You can supply the components of an old motorcycle and it is very gratitude. In H2, I used it. I would appreciate your favor in the future.
It is a three stars to the price for a [Webike monitor].
You can supply the components of an old motorcycle and it is very gratitude.
In H2, I used it.
I would appreciate your favor in the future.
View detail