Reviews
The fuel line is bent 90-degrees and a filter is installed! Large capacity and low resistance!
I bought a battered 900SS (900SL) and am Restore.
DUCATI features a fuel pump and fuel fliter built into the Tank, and there is no pump or filter beyond the Tank's Fuel Cock.
But I don't like this configuration...
The reason I don't like the Fuel fliter built into the Tank is that it looks Refreshing, but I can't see how dirty the Filter is at all.
It is a huge Large Filter and rarely gets stuck, but you can't be in a situation where Garbage is piling up and not know it.
Therefore, I wanted to remove the Filter built into the Tank during Restore and set up a Filter outside the Tank.
I have a front and rear independent carburetor spec. (and both front and rear are down draft, which is a special spec.), which makes it very difficult to handle the fuel lines.
The result was Large success.
We succeeded in bending the Gasoline piping 90° as desired because we installed it independently just before the Carburetor, and the Gasoline piping came together very nicely.
Filter capacity will be less than OEM's Giant LargeFilter, so Quantity to avoid flow resistance.:2pc. Set installation is also in line with the goal.
It also has a built-in Magnet, which OEMFilter does not have, so no complaints.
Transparent Material:Since it is plastic, its durability is a mystery, but it does not feel like it is made of a particularly inferior material, so it probably won't be a problem.
This is a Recommendation!
View detail
L-Type is selected depending on handling conditions
The Straight Type was being used, but the hose was being loaded at the filter mounting point, and vibration caused it to crack, from which the gasoline leaked out.
Depending on the handling situation of the hose, we have to select the right shape to avoid loading.
It could cause a fire.
For my Motorcycle, this L-Type was the right choice.
The filter is fine and good.
View detail
It is soft and easy to use.
It is a little thicker than Kawasaki OEM parts, but I felt no discomfort in wearing it. The length is different between No.1 and No.4. View detail
Used for my car kz1000
Replaced in preparation for carburetor Overflow.
The current Hose was concerned about fire in the event of a short leak.
The diameter was perfect and it was installed securely.
View detail
Easy to use
Pliers make it easy to pick up and remove the fuel hose and other items very easily.
The Clip is also very strong, so there is no need to worry about leakage.
View detail
It is effective for Hose, which is frequently removed.
It is very easy to attach and detach the parts from the Fuel hose and the negative pressure hose to make it easy to pick up and remove the parts with the pliers, and the clipping force is also very strong so there is no need to worry about leaks. View detail
If you're looking for a new fuel Hose Band, I'll be happy to help you with that
When renewing the old, hardened Fuel Hose, I decided to use the Hose Band is also new
Because the fuel Hose Band is a little thicker than usual, it is possible to put on and off the needle with the Band of Gold Type It's not easy to put on and off the Band, but the Clip part of this product is easy to grab
If you need to remove the Fuel Hose frequently, this is a good band for you
View detail
good
Hose degraded, replaced with new hose
Rubber parts must be replaced on a regular basis
I cut it to the appropriate length as there is plenty of room in the length and use it
View detail
Hose classes are consumables
I exchanged because the used Hose has become harder with hardening. It was exactly the same as cutting the length to just two.
We recommend that you exchange before Trouble comes down, as it deteriorates.
View detail
PMC(Performance Motorcycle Creat Fuel Cock review
Perfect, quality product that installs easily. After driving with my new tank pmc several kilometers no trace of gasoline leak. Lever control is light. View detail
The real thing is different from the display of ShoppingPage
Product description of ShoppingPage "7-8 Φ correspondence" , In the real package "6 to 8 mm compatible" It is written.
I could not use it. "6 to 8 mm" If I had written it, I think I did not buy it. I wasted.
View detail
Mounting Easy
When switching Fuel Hose OEM Parts Number is hard to attach when keeping Hose, but this time
PMC Hose Band It is easy to install with actual fingers with fingers. or
PMC Hose Band will enter even if Hose is Large when spreading.
View detail
Easy to remove
Previously I used the needle GoldType products, although removal was a little troublesome, but this item can be easily detached with Clip type so I liked Large. Also looks good GOOD and durability is also good.. View detail
Let's exchange hardened Hose
Vehicles whose age has passed have been hardened by the Rubber family. Since my GSX - R 750 is also solid in various places, I am promoting timely replacement. View detail
L-Type
I was looking for an L-Type Fuel filter and found it and bought it. With Magnet it is safe even if foreign matter is mixed in. Since it is a consumable item, I exchange it after using it to some extent. View detail
Satisfied with Cost performance
I bought the Overflow hose set made by PMC this time, but I am satisfied with Clip attached because it is inexpensive compared with the oil resistant Hose of Universal Product. View detail
Fits: KAWASAKI Z1000 (air-cooled), KAWASAKI Z1100 (KZ), KAWASAKI Z750-D1 (KZ750D), KAWASAKI Z900 (KZ900), KAWASAKI Z1000 MkII, KAWASAKI Z1000R, KAWASAKI Z1000 (air-cooled), KAWASAKI Z1100 (KZ), KAWASAKI Z750-D1 (KZ750D), KAWASAKI Z900 (KZ900), KAWASAKI Z1000 MkII, KAWASAKI Z1000R, KAWASAKI Z1100 (KZ), KAWASAKI Z750-D1 (KZ750D), KAWASAKI Z900 (KZ900), KAWASAKI Z1000 MkII, KAWASAKI Z1000R
I tried to attach it to KZ 1300
Used instead of KZ 1300's OEMCook. Although there was no problem with the OEM, the Strainer got torn and inevitably changed. Although it is not originally a VacuumType, it only works by branching from Vacuum hose of KCAS. View detail
PMC Overflow hose set
In the neighborhood's home center there is no handling Size's Hose. Length was changed to one carburetor of TM 40 so it was surplus. I think that I was glad I could buy it at an affordable price. View detail
Super fast shipping to Norway.The fuel cock looks solid and very nice.Superb replacement for my triple fuel cock. Recomended strongly.
Super fast shipping to Norway.The fuel cock looks solid and very nice.Superb replacement for my triple fuel cock. Recomended strongly. View detail
With CARBURETOR exchange of RZ50, it considered that it was better to be and purchased rather than there was nothing.Although it was cheap from the first and also a bargain article, they are too appropriate goods. understands, and a Design
With CARBURETOR exchange of RZ50, it considered that it was better to be and purchased rather than there was nothing.Although it was cheap from the first and also a bargain article, they are too appropriate goods. understands, and a Design is not quite satisfactory, either, although purchased -- it carries out, and since inside cannot be seen at all, neither structure nor an effect is known. View detail