Reviews
It's the worst
First of all, it cannot be used for external carburetors (CRcarburetorc.). Obviously, the dimensions are shorter than OEM, making it unusable. The normal Indicator can be used with OEM and external carburetors, but not this product. I don't even want to add a single "*" to it. I am sorry to say that I discarded it. View detail
Durability is endlessly low.
PMC Material:Rubber products in general are not very durable anyway. This product is no exception. In my case, it ripped after 2 years.
And at this price.
Since the function of this Pipe is only to return the blowby gas in the Crankcase to the Air cleaner box, it is better to substitute oil-resistant hose instead of using this Pipe.
View detail
Fits: KAWASAKI Z750 (air-cooled), KAWASAKI Z1000 MkII, KAWASAKI Z1000 (air-cooled), KAWASAKI Z900 (KZ900), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z750FX
Not at all
I bought this one because the sound came out of the No-Mal Tensioner, but Spring's Weak rebound? I removed the carburetor and this time, the sound became worse I tried to install it with Spacer, but the spring rebounded and did not allow Bolt to take a bite Mm View detail
Fits: KAWASAKI Z750 (air-cooled), KAWASAKI Z1000 MkII, KAWASAKI Z1000 (air-cooled), KAWASAKI Z900 (KZ900), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z750FX
Not at all
I bought this one because the Nomar Tensioner came out sounding, but as per Manual I installed it, but the spring rebound is weak? Notch did not extend and the sound became terrible instead This time I removed the carburetor all the way again and tried to put in the Spacer However, it was difficult to install it because of the strong rebound of Spring without the Bolt It was a waste of money View detail
No value to buy
I also had it in other people 's impression, but Hose is too hard and it is difficult to insert. Although I tried to install it, I saw it but because Hose is too hard and a considerable Tension is hanging over the plugged part of Pipe, it seems likely that Crack will enter Pipe due to vibration etc. in the long term. I wore it but I immediately removed it. View detail
The real thing is different from the display of ShoppingPage
Product description of ShoppingPage "7-8 Φ correspondence" , In the real package "6 to 8 mm compatible" It is written.
I could not use it. "6 to 8 mm" If I had written it, I think I did not buy it. I wasted.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPZ750R
Defective item
Although it corresponded, it does not operate after trying it at the beginning. Connector mismatch.
Things that Wiring was wrong when sent back.
I replaced it and sent it back, but I do not feel like finishing summer already anymore. The Connector must be fitted or fixed with Tie Wrap but it can not be thought of as Exclusive Design by vehicle type.
View detail
Fits: KAWASAKI Z900 (KZ900), KAWASAKI Z750 (air-cooled), KAWASAKI Z1000 (air-cooled)
OEMO-ring can not be used
I attempted to install an O-ring for OEMDrain bolt to replace O-ring, but I could not use it.
The outer circumference of the groove is larger than OEM Product, so it does not fit in the groove.
Since it can not be helped, I used a liquid Gasket buried in the groove.
View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI ZRX1200R, KAWASAKI ZRX1100
It is not attached, unless the place into which a 6-mm Bolt is put has 4-mm solderless contact and it exchanges for it. If attached a little more simply, I will think that it is good. Although it is it and a Switch, since wiring goes a
It is not attached, unless the place into which a 6-mm Bolt is put has 4-mm solderless contact and it exchanges for it.
If attached a little more simply, I will think that it is good.
Although it is it and a Switch, since wiring goes away upward, water does not pour in or it is uneasy!
I think that it will become good goods if this neighborhood is improved.
View detail