Reviews
Satisfied
I am satisfied with Large because it suits my motorcycle EXACTLY. View detail
Fits: KAWASAKI Z900RSCAFE, KAWASAKI Z900RS, KAWASAKI Z900RSCAFE, KAWASAKI Z900RS
the best dress-up item
It's the best dress-up with a long tail. It's a real old z-series look. You can say I did a long tail because of this. No problems with visibility, brightness, etc. View detail
You should buy it when you find it.
It would be nice if they had them in stock when I wanted them, but they are often out of stock. When I find one, I buy it immediately. View detail
It will look different when the Light area is cleaned up!
It's beautiful, it's good! The look, the Impact, the difference! View detail
Satisfied
Satisfied if not particular about OEM Product! View detail
PMC LED taillight
About quality and texture Great product. Quality as good as the OEM itself About the feeling of use Looks great with the clear case and the O ring light. Products to buy together No other parts needed as I installed on my OEM rear fender. Difficulty of installation Needs about 20 mins to reach the screws just unplugged n plug. Easy to install. Cost performance and comparison with other products Good cost doesn't break the bank. About shipping and packaging Well packed in a box. Any concerns, cautions, or advice when purchasing The braking light may look a bit small. But I think it's sufficient on the road. View detail
Fits: KAWASAKI Z750FX, KAWASAKI Z1000 MkII
Tail lamp lens
It was very nice and very close to the real thing for a reprinted product. View detail
Fits: KAWASAKI Z900RSCAFE, KAWASAKI Z900RS, KAWASAKI Z900RSCAFE, KAWASAKI Z900RS
"cool
Satisfied with the old car look.
Installed on PMCL Long tail SlightRear Fender with no problems.
Especially if you use SlightRear Fender, you have to transfer and install the NORMAL License Plate Light, but this Tail lamp is integrated with the License Plate Light, so you can remove the NORMALLicense Plate Light. However, since this Tail lamp is integrated with the License Plate Light, the NORMALLicense Plate Light can be removed and refreshed to give a good impression.
The Instruction Manual was available, but it was easier to understand the installation procedure by watching the Manufacturer's YouTube video.
It is easy if you follow the steps.
View detail
pretty good
I thought it was fine to have a NORMAL Tail lamp, but I can't see it from me …. But when I was running behind my Z900RS friends, I couldn't help seeing this Abalone Tail! So I replaced it by removing the Tail cowl and the Bracket + ScrewQuantity.:Just remove the 2pcs, remove the power coupler, replace the body, and put it back together! Parts to show everyone how cool your butt is! View detail
For the Restore of the 2nd old car.
Since it is difficult to obtain OEM Headlight peripherals, we tried to restore with the product in question, which has similar dimensions.
I think the atmosphere is good.
However, I was prepared from the beginning, but it was dark…
View detail
For the Restore of the 2nd old car.
Since it is difficult to obtain OEM Headlight peripherals, we tried to restore with the product in question, which has similar dimensions.
It may be an individual difference, but the headlight rim was too tight to fit.
A little processing is all that is needed to solve the problem.
Hybridw of KIJIMA Headlight Bracket + Honda Headlight + SEA BASS Blinker on Kawasaki car
I think the atmosphere is good.
View detail
Like the original!
I was looking to add turn signals on my Honda cb77 but with the right period looking. I found the perfect parts at webike!! View detail
PMCRearLamp
The Exhaust System and Handlebar were already installed by Archi, so I decided to use PMC's to match.
Blinker is NORMAL, so I changed it to Clear to match the color.
Installation is easy:remove the Seat and there is not a single difficult task if you have the tools that anyone would have.
If you are worried, you can often find installation videos on YouTube.
It's a part of the car that you can't see while driving, but it's cool because the way it glows is totally different from NORMAL.
I think the reason why everyone is replacing the Abalone Tail is because it is cheap and easy to replace a prominent part.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750FX, KAWASAKI Z900 (KZ900), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z900 (KZ900), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750FX, KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z900 (KZ900), KAWASAKI Z2 (750RS/Z750FOUR)
Fork GuardLowerDamper rubber for PMC Z
Purchased with Washer.
Only Gasket is difficult to prevent from deteriorating.
It is a necessity when replacing parts.
To be honest, it would be a big help if you could stock only Gaskets by Manufacturer.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750FX, KAWASAKI Z900 (KZ900)
Light BracketLower washer for PMC Z
When reverting from Separate handle to STD Handlebar, the OEM Headlight Bracket
Purchased to re-install.
If the cost was a little cheaper, I could be satisfied, but without this, the Light Bracket is hard.
I can't decide what to do, so I'll just have to live with it.
View detail
The car inspection passes without a problem.
Installed on KawasakiZ1.
It can be attached to the light case of NORMAL beautifully.
If it is an old car, it will pass the inspection without a problem.
However, when I used Yellow Lens and bright Valve, it became too dark.
View detail
Dress-up
Tail cowl Fender Eliminator is equipped with PMC, so I thought it would have a sense of unity.
Since it is STD Blinker [Color] I chose Clear and I think it's cohesive.
View detail
Used for HondaTODAY
Because HondaTODAY was converted to Bar handle, I bought it to relocate the Blinker.
I am very pleased with the quality of the product.
View detail
Easy to install
The work itself takes about 30 minutes even for a beginner.
Torque management is also unnecessary for this part of the work, so as long as you have a Hexagonal Wrench, it's Large durable.
The visibility is probably higher than NORMAL and I'm satisfied with it, although it's a part I can't see.
[Color] I had a problem with Clear, but the color of the parking lot. [Color] Smoke
View detail
Large Satisfied
I bought this to create an overall sense of unity.
[Color] I was worried about Clear, but it's less noticeable. [Color] Select Smoke.
The work can be completed in about 10 minutes even if you are not familiar with it. As long as you do not work roughly, there is no problem.
I can't see it myself while driving, but I think it was a good buy.
View detail