Reviews
Used as an alternative to cb450k0
Since it is almost impossible to pass the inspection with the original one and Valve's procurement is Large strange, we used this one as an alternative that does not spoil the appearance of the old car.
We use only the LensASSY and the light rim is the original one from CB450.
The light intensity is not particularly bright, but it passes vehicle inspections without difficulty, and the light valve can be used with the current standard, making maintenance easier.
One drawback is that the Valve Coupler is installed separately and slightly interferes with the Meter Wire at the back of the unit.
View detail
To pass inspection!
Replaced the OEM 350SS for inspection. I was worried if the cat mark would protrude from the optical axis, but it passed without problems!
The H4 socket is not included, so you need to prepare it separately.
View detail
![MK-II/Z750FX-I Tail Lamp [Lens Only]](https://img.webike-cdn.net/catalogue/images/3298/81-4397_4398_4399_l_TS.jpg)
Fits: KAWASAKI Z750FX, KAWASAKI Z1000 MkII
[Color] SmokeTail
[Color] SmokeTail makes Ria look tighter. View detail
I went with the OEM look Red.
[Color] I used to use the Smoke one, but I made a small mistake and tightened it with Overtorque, so the screw part was cracked a little. This time, I bought the normal Red one because Timing didn't have the Smoked one in stock.
I am satisfied because I was able to return the house to its original state without any particular points of concern.
The mating of the packing is not good, but this is not a big deal.
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
Diversion to kh400
It is for z1z2, but I diverted it to kh400.
Even though I had the optical axis adjusted at the tester shop at the time of vehicle inspection, it moved up and down a little due to vibration until I went to the vehicle inspection lane, so I diverted and installed this one.
View detail
The silent type is really quiet.
"OEMRelay failed and I replaced it.
It's not impossible to repair a Relay, but it's difficult for an amateur and Universal Product isn't expensive. You should be able to replace it honestly.
PMC's have a peculiar cylindrical shape, which is a bit large. The later models of Motorcycles are square in shape, but there is no difference in performance.
However, the Socket part of Relay is available in 3 and 2 pairs, which are either compatible with hazard lamps or not.
Please note that this product is a two-foot, hazard-free construction. "
View detail
You can expect to hear a lot of noise
Kachicachi, hoping for a sound of movement and a replacement!
It is being used by XG250 TRICKER
My XG250 TRICKER, Normal muffler and very quiet Engine! But
When the Engine is starting, you can hardly hear it running
The BlinkerIndicator on the XG250 TRICKER is hard to see, so I forgot to turn it off Prevention
I chose to use the sound system, but I am disappointed
As for the Blinker relay, it looks fine
We do not recommend purchasing based on the sound of operation
My ears aren't covered in the trial, though I did check with Helmet
Even in that state, there is only a small amount of confirmation of operating noise and no effect
If it's late at night in a residential area and you're not running Engine, it might be just fine!
If your STD Blinker reley breaks down, I think this is a great product to recommend
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
Required to install Z2 Tail
Purchase necessary to install Z2 Tail lamp to Normal fender of ZEPHYR 750.
It was relatively easy to install and we could install it in about 15 minutes.
Just a small part of Large protruded from the Tail lamp and a semicircular Aluminum Ground was seen from behind, I think that it was good if the color was a black color because the appearance is a bit concerned.
Also, NORMAL's Tail lamp is designed to prevent dust and water from entering the Tail cowl in Rubber's Packing, but as this creates a gap without closing after NORMAL is removed, the entry of dust and water It is about to become.
The price was a little expensive so I got lost.
View detail
Excellent atmosphere
To install it requires an optional Bracket Kit but you can install it with Small processing, the finish is Z2 pockety feeling.
Just Valve of Tail lamp of ZEPHYR 750 is Quantity : 2pc. It is bright with Set, Valve of this product is 1pc. It's only dark so visibility is somewhat concerned.
View detail
The central Black cat is cool
Easy to install for only 30 minutes, it was necessary to process a small amount of optical axis adjustment claws by File or bending with Pliers, the OEMOuterRing and the attached Inn Knurling Center will be misaligned and OuterRing and In Knurling will interfere Even if Rim is corrected by force technique, it will be eccentric when this set is eccentric, it will be repeated several times to eliminate the interference but after all the eccentric mounting Screw hole is large Luck here There seems to be many eccentricities, but if you do not see it carefully, you notice it at all and you can adjust the optical axis adjustment to Smooth, so it's like a Universal Product, so I think it's like this, I was able to enjoy DIY moderately.
I think that the appearance of the installation is moderately good, since the brightness is accustomed to the high efficiency sphere, it felt dark in the attached sphere, so high efficiency in use up to 135 w / We exchanged for a sphere equivalent to 125 w, Low beam was a bit small but cheap, High beam was replaced by an irradiation range / Besides my thought, I was satisfied with satisfaction in both my distance and my distance.
View detail
Small Taking a GOOD!
I attached it to KH 400. (Exchange for Marshall StarLux installation)
The moment of opening the box "Wiring this thing does not fit ..." I thought that it was OK at all but I changed the Valve to LED, but all the LED Unit also fell. Recent Kawasaki car HeadlightLarge is not it. Small I got to look like a face tightened by swinging.
View detail
The high quality is just a s depicted. Very sturdy, rubber is excellent. Indicators should not suffer drooping with standard long stems.
The high quality is just a s depicted. Very sturdy, rubber is excellent. Indicators should not suffer drooping with standard long stems. View detail
![Z1R/Z400FX Tail Lamp [Lens Only]](https://img.webike-cdn.net/catalogue/images/3298/81-4387etc_z1r_l_TS.jpg)
Fits: KAWASAKI Z400FX/Z400J, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z400FX/Z400J, KAWASAKI Z1-R/Z1-RII
Z1R/Z400FX Tail Lamp [Lens]
Purchased because OEM's Tail lens scratch was conspicuous.
I made it a little different from OEM.
Making is normal as usual. It is not bad and it can be used well.
The color tone is saying Black and it is darker than Red of NORMAL when looking at it from the following, so Brake may feel somewhat dark.
I will try and use it properly by changing my mood.
View detail
PMC Marshall Headlight 889 Driving Lamp
Somehow I wanted to imechen and bought it.
Since it can be used in combination with the currently used CIBIE 180 Pase Case, we purchased only the Kit of the Smallest limit.
Ya ○ Things were also sold at that time at high prices, but I thought this was a good product for me.
It looks good because the cat's Mark is pretty Marshall, but it seems that CIBIE was still brighter again.
At first ○ Although I was planning to buy it at Oku, I rejected it because it costs a postage + card payment commission.
If you purchase from PMC, the shipping cost was free, but WEBIKE purchased it because it was the cheapest in the free shipping + Sale period.
Mr. WEBIKE is also cheap in price and shipping is also quick, so I'm satisfied with Large.
If you purchase the same item, we recommend that you first compare it with WEBIKE.
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
Convenient
Manufacturer The Tail lamp of DOREMI COLLECTION could be installed in the unknown Fender Eliminator Kit. There was somewhat gliding, so we fixed it with the Rubber board in between. Considering that you do not have to buy the Exclusive Fender Eliminator Kit, I think that it is good to think that it will be cheaper. By changing Color and Bolt you can also adjust the output of Tail lamp.
It is a good idea to try people who dislike getting it inside the outside Tail cowl.
View detail
Installed in LITTLE CUB
I installed it in LITTLE CUB. Tail lamp was also made Clear so we tried Blinker Clear as well. Of course Clear Lens so I'm on OrangeledValve. When it is made into LED When inside of this Lens is narrow, it is not short unless it is short type short like Valve.
I'm satisfied with the feeling that I made it clearer..
View detail
I installed to GN125H. I choose a smoke color. The stay on tail lamp doesn't meet to the fender, so the screw hole need to be expanded by a drill or sand paper. I used my motor screw driver. There are 2 wires from tail
I installed to GN125H.
I choose a smoke color.
The stay on tail lamp doesn't meet to the fender,
so the screw hole need to be expanded by a drill or sand paper.
I used my motor screw driver.
There are 2 wires from tail lamp.
Red= small
Black=stop
The wires from GN125h is
Grey= small
White= stop
White on Black base= earth
I think the size also matches to the bike.
View detail
[Webike Monitor] Since the Tail of Z2 Type bought before cracked, the Smoke of LED was purchased drastically this time. Since the front was ordinary red, it is a Smoke this time... Although it is not bad, I consider [ child-like f
[Webike Monitor] Since the Tail of Z2 Type bought before
cracked, the
Smoke of LED was purchased drastically this time.
Since the
front was ordinary red, it is a Smoke this time... Although it is not bad, I consider [ child
-like for a while ].
Although I think whether this neighborhood is to its liking .... About
attachment, since it was with the instruction manual although wiring was also easy, it was able to do satisfactorily at all.
if it is this product that the difference of illuminance when the time and the
Brakes are usually applied was seldom able to feel although it was a Type which exchanges only a ball for LED about
LED until now --
-- it turns out well that Brakes are applied clearly.
this point sense of security
exists dramatically --
-- since it is merely Z2 Tail -- LED -- the whole -- it shines -- the old vehicle -- it is -- being lost --
-- I consider [ being just going to be worrisome for a while and ].
Although this is also liking and becomes empty.
On the whole, it goes into me and mind.
View detail
Fits: KAWASAKI Z400FX/Z400J, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z400FX/Z400J, KAWASAKI Z1-R/Z1-RII
Since it had become it dirty, it exchanged. It could be rather beautiful. Structure was also solid.
Since it had become it dirty, it exchanged.
It could be rather beautiful.
Structure was also solid.
View detail
Since the Position-lamp function is attached and was extorted when the Blinker with a Position of a NORMAL was exchanged for a general-purpose European blinker, this product was purchased. The Socket was also smallish and it was settled reasonable in the
Since the Position-lamp function is attached and was extorted when the Blinker with a Position of a NORMAL was exchanged for a general-purpose European blinker, this product was purchased.
The Socket was also smallish and it was settled reasonable in the Blinker body.
When it could do, furthermore it was attached to the Socket also by the pin for ground connection, I think that it was good.
It seems that it does not sell easily these days although a thing like this product is anywhere sold at the car shop a long time ago [
].
Although the price is cheap, they are goods which are satisfactory at all.
View detail