Reviews
Fits: KAWASAKI ZEPHYR750, KAWASAKI ZEPHYRX, KAWASAKI BALIUS, KAWASAKI BALIUS2, KAWASAKI ZR-7/S, KAWASAKI ZEPHYR450, KAWASAKI ZRX-2, KAWASAKI Zephyr 750, KAWASAKI Zephyr X, KAWASAKI barios, KAWASAKI Varios 2, KAWASAKI ZR-7/S, KAWASAKI Zephyr 450, KAWASAKI ZRX-2, KAWASAKI Zephyr 750, KAWASAKI Zephyr X, KAWASAKI barios, KAWASAKI Varios 2, KAWASAKI ZR-7/S, KAWASAKI Zephyr 450
ZRX400?
I replaced the Headlight.
by (means of)
Very custom feeling.
I'm out.
View detail
Does not fit the ZEPHYR1100 OEMHeadlight!
Webike I was informed that it fits by the confirmation answer, but I was not able to install it because it is smaller than the OEM Headlight. View detail
Long tail cowl essentials
PMC Long tail cowl and
Used with PLOT's Fender Eliminator Kit.
Installation is the easy part.
If you can make Fender Eliminator by yourself, you can work on Level without any problem.
The wiring extension was also very large and sturdy by just connecting the connector of the attachment, although the Instruction Manual said to cut the terminal.
However, is it individual difference? On my guy, there was more gap between Stop-lamp and Cowl than I expected.
Personally, I'm not convinced Forme.
It's a shame, but I decided to replace the entire rear area and this extended bracket set is now ready to go.
View detail
Compact
I like the design and compactness of PMC. I like the design and compactness. (88mm) I also bought a Bracket and I'm posting an impression. Please refer to it. View detail
I'm compatible with the installation!
It is not fixed completely even if the bolt for the lock is tightened though it is about the installation with Square Type Blinker of the same manufacturer. If you don't take some measures, you will have wobble. View detail
So-so
New product development is great.
It's also a product I've always wanted, but I feel like it's missing a step.
Bumps on the way? I'm sorry about the line.
It's good if Blinker goes in that far, but it doesn't go in that far and you can see the lines.
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z900 (KZ900), KAWASAKI Z1000, KAWASAKI Z750 (air-cooled), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z750FX, KAWASAKI Z1000 MkII, KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1000 MkII, KAWASAKI Z750FX, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z750 (air-cooled), KAWASAKI Z900 (KZ900), KAWASAKI Z1000, KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1000 MkII, KAWASAKI Z750FX
watchman
This is a very common part, but you will have to remove the fork to install it, so it will be tricky if you can't adjust it after reassembly. You need to have the right equipment to install this part, so I think this part is suitable for advanced users. View detail
![Z2 Type Blinker[Lens only]](https://img.webike-cdn.net/catalogue/images/57391/z2type_winker_l_TS.jpg)
large person
Orange~ [Color] Smoke has been finished like a large person. View detail
It is easy to install.
Installation is easy
It was truly Bolt On.
The color of the Lens, I was worried about it, but in the end, I decided on Clear.
It matches the color of the Blinker lens and I'm happy with the result.
View detail
The silent type is really quiet.
"OEMRelay failed and I replaced it.
It's not impossible to repair a Relay, but it's difficult for an amateur and Universal Product isn't expensive. You should be able to replace it honestly.
PMC's have a peculiar cylindrical shape, which is a bit large. The later models of Motorcycles are square in shape, but there is no difference in performance.
However, the Socket part of Relay is available in 3 and 2 pairs, which are either compatible with hazard lamps or not.
Please note that this product is a two-foot, hazard-free construction. "
View detail
So far, no defects!
I use it on my WR250F.
It's been about a year since I replaced it and it's been functioning well with no problems.
It's solid and the quality is secure.
View detail
Custom Size to fit the vehicle
I was worried about 45φ but when I put it on, I thought it was the right size.
Bracket and bulbs are sold separately and are Socket for Single Bulb.
I use Front as a replacement for my WSocket.
Plating part is shining and looks good.
View detail
To the MONKEY!
I've been looking for a double socket replacement for a while now, because BlinkerBody is an Earth It is installed as it is because it is a replacement for the SocketMounting Bracket and LensScrew part was modified. View detail
I like the look of it!
When I think of NAKED, I think of Marshall!
The quality is good for the price, and most importantly, it still looks cool!
The Yellow colored Lens is also brighter and I can see much better up ahead!
View detail
You can expect to hear a lot of noise
Kachicachi, hoping for a sound of movement and a replacement!
It is being used by XG250 TRICKER
My XG250 TRICKER, Normal muffler and very quiet Engine! But
When the Engine is starting, you can hardly hear it running
The BlinkerIndicator on the XG250 TRICKER is hard to see, so I forgot to turn it off Prevention
I chose to use the sound system, but I am disappointed
As for the Blinker relay, it looks fine
We do not recommend purchasing based on the sound of operation
My ears aren't covered in the trial, though I did check with Helmet
Even in that state, there is only a small amount of confirmation of operating noise and no effect
If it's late at night in a residential area and you're not running Engine, it might be just fine!
If your STD Blinker reley breaks down, I think this is a great product to recommend
View detail
Chinese Quality
The texture of the body is bad and the plating is dull
No bulbs are included
There is a fear of disconnection due to an unreasonable wiring method
An example of what it means to be cheap and what it means to be poor
View detail
Fits: KAWASAKI Z1100GP, KAWASAKI Z1100 (KZ), KAWASAKI Z1100GP, KAWASAKI Z1000R
It's good for the price
I'm going to be able to use it for a while BALI? etc. in the manufacturing process of the body is a little noticeable, but because it is with Bulb, it is cheap It's good for the sake of it, isn't it? View detail
Dress Up Parts
When changing to a long tail cowl, Parts that produce a tail lamp It's easy, but you'll need to extend the wiring with Bullet Terminal
The Fender Eliminator Kit is now available from the same PMC
Since the kit includes a tail lamp extension, unless you use the OEM mudguard, this Kit is not required
View detail
Casting & Plating Quality
The styling is perfect for my Z1, much smaller than the orignal blinkers, but the casting & plating quality is terrible. I exchanged them for another set. View detail
And the noise it makes is just right
I bought this because my APRIO Blinker stopped blinking It's a normal bulb, front and back, but it works fine Because the direction of the hole of the attached rubber was different, I used OEM Relay's rubber to use The terminal was able to be replaced with no problem The moped without an indicator has the sound of operation I'm grateful View detail