Reviews
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200 Daeg
It was even better than I imagined.
I initially purchased it for its design and price.
Other companies offer Tuck Roll Seats for the ZrX1200 DAEG, but this product was by far the cheapest and the quality was comparable.
Only Mounting Hardware can be replaced with OEM to eliminate the gap problem.
When it arrives, the Seat is straight and requires a lot of force to install, but after a while of putting it on, it will bend to fit the car body.
The Seat height is slightly lower and the cushioning is also lower, but the width is a bit wider, which in my case has significantly reduced buttock pain.
(I was pleasantly surprised because I thought it was inevitable that I would be sore because of the emphasis on design.)
I have had it on for two years and it is still working beautifully.
View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200 Daeg
It's cool, but …….
The installed Style is quite Cool.
The gills of Seat are taut, so it is likely to be surprisingly choosy about who rides it.
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
Is good
The Style is quite to my liking. View detail
Quality Improvement
The quality improvement is incomparable to that of the Normal seatBelt.
This PMCZ2Type is set up to go through a folded hole, so even beginners can install it easily!
The folded back belt also comes with a special bracket, which also gives it a luxurious look.
The bracket that fastens the Seat is too cool and shiny.
Anyway, no complaints!
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
The quality is good and the cosmetics are quite good.
The footing does not change much, but it is good that it can be popped on and gives the feel of an old car.
The price is surprisingly about half that of OEMSeat.
I would buy it again with a different Design (lol).
Also, note that the seating position is about a few centimeters back, so if you feel the Handlebar is too far away, be careful.
View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200 Daeg
Great seat
The seat is good quality and fits well (bigger gap at the back between the fairing and seat but not a deal breaker). The riding position changed. It's higher than the OEM seat, but it's a nice upgrade, comfortable even on longer rides, and the passenger comfort is improved too. Very happy with the purchase. View detail
As good as the original.
I just gave the received parts to my mechanic at Kawasaki, and he installed the seat. I am very impressed with the quality and fit of this seat. Looks and feels just like the original. Can't wait to source out the other needed parts to bring my 1980 MKII back to its original form. Awesome product, highly recommended. Tariq Khorma View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
lock for the Kawasaki z1 .
Great price for this lock, easy to assemble, fast delivery Top webshop, Webike is a must where everything is available --------------------------- ------------------------------- Great price for this lock, easy to assemble, fast delivery Top webshop, webike is a must where everything is available Powered by Google Translator View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200 Daeg
Review
Speedy delivery quality item. update on item availability will use again and recommend this seller. Smooth transaction. View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200 Daeg
ZRX 1200R PMC Seat Mesh Type Style
Purchase PMC Mesh Type Seat. Fits perfectly without any modifications to my ZRX 1200R. Good seating position. Harder than stock seat but good View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
If you don't care about NORMAL.
If you don't care about OEM NORMAL, you can use these Stainless SteelParts to make a shiningly shaped seat underneath. View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
Seat replacement for PMC
[How is it used? Normal seat of ZEPHYR750 is soft, but front and rear, Quantity:Pair (for Left and Right) If you don't have a good knee grip, your hips will slip during Curve. My friend was wearing PMCSeat, and I was told that NORMAL ZEPHYRSeat is very slippery, so I replaced it.
Was the one you received as per Image? PMC Seat, Butt Hold Well Before and After Quantity:Pair (for Left and Right) It is not easy to slip on the Curve, and it is very stable and secure when driving the Curve.
Was the installation difficult? It's easy, the seat belt is also easy, you just need a driver and a cone.
How was your experience with it? The ride is a little stiff, but the stability of the body is good and you can operate the Curve with ease.
[Included Parts:were they on? Seat belt was attached
[Was there anything that disappointed you? PMC's Seat can be ridden with ease, and the sushi is smoother than before.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Great seat
I ordered the seat from Germany. It arrived within a week at my house including Custom procedures ... perfect. Attaching the seat to the motorcycle was simple and as easy as the OEM Version. Riding it is more or less the same as on the OEM seat, which is perfectly Okay for me. My decision to purchase was the look and design of it. You got another happy customer. Thanks View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200 Daeg
It is over the price ? ? ? PMC
I changed OEMSeat only epidermis
There is something in Sponge, it's 20 years old Seat so it's sunk (There was something)
So search for PMC by search and check real on RICOH RAN O!
This is instantaneous as soon as possible
It is a purchase immediately.
The gap between Review and Cowl is also not as bad as NORMAL.
Even with 4 hours of driving, my ass does not hurt.
I'm glad I really bought it. Even when calling Manufacturer well
Recommended for people. It is 95 points. Confirmation of durability is necessary for the remaining 5 points?
View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200 Daeg
Looks good !!
1 Cospa
The price was affordable, and it was in Sale, so it came in cheaply together with Point.
2 Installation
A slight gap can be made as with other impres, but by changing OEMSeat 's gold tool it has been firmly fixed. Quantity : Pair (for Left and Right) Exactly without floating.
3 Looks
I think that it is perfect for those who like Tuck roll.
4 Sitting comfort
A bit hard compared to OEM. As for the footsteps, the OEM sinks as much as there is no subduction due to the hardness of Seat, so feeling that it does not change much. Since the front part is raised from the OEM, the seating position is inevitably fixed and the Handlebar is far became. (Small raw Small pattern as it is)
5 Conclusion
I was glad I bought it on a price-by-look basis.
View detail
Fits: KAWASAKI 500SS MACHIII (H1), KAWASAKI KH500
Purchased into Unlined Base
It is convenient because it is molded integrally with OEM Shape.
I also made a shape to the Seat base with a well shape.
Urethane is soft and does not feel tired but it does not get tired with running around 300 kilometers.
I got a full service, but if it is about 10,000 yen without Parts so I can choose it OK.
Please sell a lot of Ripro products.
View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200 Daeg
The shape is also satisfactory.
As the other person was told, when I installed it, the gap on the back side was Large and it was uneasy when it was raining.
If I contact Manufacturer and listen to the hang at the time of installation and wear it, the gap is almost gone,
At present, the gap is nearly lost and it is Large changeable satisfaction.
Even when going to Touring, I think that pain in the butt is considerably easy with moderate softness.
View detail
PMC Seat belt
The belt fits on the seat without any problems. It looks really good, especially if you decide to remove the original seat fabric and replace it with a stitched leather. View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200 Daeg
2003 Kawasaki ZRX1200R with PMC Performance seat
I find this seat to be very comfortable for 4 hour sporty rides the seating position is a good snug fit like sitting in the bike not on it .The seat base is quite firm For touring i use the OEM seat .Overall I am happy with the seat and love the look it gives the bike. View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
Large strange. Recommended for people who are considering Seat exchange.
There is nothing compared with other companies' products, but Position is definitely better than OEM Product. I am about 160 heights, but I felt that ease of riding, Position is definitely better than OEMSeat. Although I think that other people's comments are also good, I think that it is probably a person whose height is bigger than me, but most people think that Position got better regardless of height. I think that the price is also cheap and the quality is also a good product. OEM Product should be made with Position for everyone View detail