Reviews
Fits: KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750
Spec of car body. I appreciate being able to adjust according to!
Although it used it from before, it is intense due to aged deterioration, and it was replaced with a new one.
As long as you are using it for a long time, the pinched portion to the car body gradually spreads (See photo).
The STAND adjustment part also distorted slightly in Color.
Lengths of ± 20 mm each have a Spec. It is appreciated because the adjustment is effective for the change, but it is saved personally if the adjustment range is a little wider.
I made clogs on processing.
Quantity : To use with 2pc eyes is a satisfactory product overall.
View detail
Fits: KAWASAKI Z900 (KZ900), KAWASAKI Z750FX, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1100R, KAWASAKI Z1100GP, KAWASAKI Z1000R, KAWASAKI Z1000J, KAWASAKI Z1000 MkII, KAWASAKI Z1000, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1 (900SUPER4), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z1000J, KAWASAKI Z1000R, KAWASAKI Z1100GP, KAWASAKI Z1100R, KAWASAKI Z2 (750RS/Z750FOUR)
Product that does not impair the atmosphere of the car model and has superior performance.
Due to aged deterioration, the wrap has become big, from Side Stand, this product has been replaced. The too large inclination has been eliminated and the safety of the stopped Motorcycle has been secured. Large I'm strange. View detail
Fits: KAWASAKI Z1100GP, KAWASAKI Z1100R, KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1000 (air-cooled)
PMC Adjustable side stand
The movable part of OEM's Side Stand worn out. It's pretty pretty so I bought it.
Easy to install and adjust the length of the STAND is also easy. However, I fixed it with Screw lock because it will become loose during driving.
I am satisfied that it looks cool as well.
View detail
Fits: KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ900R
I needed strength unexpectedly
900 NINJA to 17 in. It became necessary as I changed it. I needed a lot of strength to install Spring. It is only there that suffered
In my case (GALE SPEEDRear 4. 50 Inch wheel, Eccentric reverse attachment, TireMichelin PP2CT, car height adjustment is not assembled) 20mm Long was just right. It is slightly upright. When stopping, it is scary unless you leave Handlebar to Left firmly.
View detail
Fits: KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750
Texture is good.
Making and texture are good, but there was more weight than I thought.
I think that the amount of gold is also high, but I think that it is optimal for vehicles that raised the car.
View detail
Fits: KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ900R
Since it was Hip UP that power goes into how to start considerably these days [ Webike Monitor ], it opted for purchase -- Attachment time is only 7 minutes and it is what! * purchase of which changed to Ninja which can be made to rise with t
Since it was Hip UP that power goes into how to start considerably these days [ Webike Monitor
], it opted for purchase
--
Attachment time is only 7 minutes and it is what! *
purchase of which changed to Ninja which can be made to rise with the treading strength of few remarkable left legs is done, and it is a correct answer!!!
View detail
Fits: KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ900R
Since inclination of a car body became large with rear wheel change this time, it purchases. In the hollow side stands made from a stainless of the normal length who used then, if die length is measured, it will turn out that it is short about 26 mm,
Since inclination of a car body became large with rear wheel change this time, it purchases.
In the hollow side stands made from a stainless of the normal length who used then, if die length is measured, it will turn out that it is short about 26 mm, and the place and past [ merit ] will be revealed. [ which purchased another maker's 25 mm side stands ]
The place and the stand itself in comparison with normal had bent.
In the hollow side stands made from a stainless, it turned out that this motorcycle is not supported.
I think that the swing arm has turned to these side stands to the person of normal.
Since recess processing from reinforcement is not carried out, power is perfectly applied to the attaching part of side stands.
In a stand with recess, it attaches and distortion occurs originally, and rapidly, inclination becomes large and goes.
When a screw loosens, if a screw stop Locke agent etc. are applied, I will think that it is satisfactory.
View detail