Reviews
Thin but rigid.
Plate itself is thin but rigid.
It is very helpful that a Bolt for fixing the Camera on the DriveRecorder is also included!
Installation of the bracket itself is very easy as it is co-tightened with the License Plate.
View detail
Not suitable for AIO-5Camera installation
[How is it used?
Used for AIO-5 Camera
Was the one you received as per Image?
As pictured
Was the installation difficult?
The installation itself is just a matter of removing the License Plate and inserting it.
It was used for the Camera of AIO-5, but the position width of the Bracket hole of Camera is different, so drilling is necessary to fix the Bolt.
Double-sided tape can be used for pasting, but the width is a little large and the depth is a little small.
Bolt length is not enough when using Double-sided Tape
It would be nice if it comes with a longer Bolt.
How was your experience with it?
No problem
[Included Parts:were they on?
Bolt, Nut, Washer included
[Was there anything that disappointed you?
None
View detail
It's not compatible with my black box
Quality and Texture Information Flat Braces Easy installation of black boxes for your environment Size Chart Information License Plate Size Cost performance and comparison with other products. There are a lot of products, but the products that I thought of WeBike packaging is always great. Arrives in a week for delivery and packaging Purchasing concerns, precautions, or advice It's a shame to only give you black box fastening bolts It certainly doesn't fit other brands' black boxes, but it's definitely fair View detail
I could use it for akeeyo's drareco.
Installation was also possible on akeeyo's AKY-958N.
However, there is no flexibility in the Screw tame.
Since I also added DAYTONA's Fender Eliminator, I chose "for Left", but "for Right" seems to work fine too.
View detail
I think it's all settled in nicely.
I think it's all settled in nicely.
The regrettable part is that
It comes with Screws for installing and fixing the camera.
It would have been nice if it was the same color as the Body anyway.
Silver on Black stands out
View detail
Used for RearCamera installation of a driverless camera
When I was thinking about where to install the RearCamera when I installed the Mistuba Sankowa EDR-21G myself, I found this product.
Note that the bolt used to attach the Camera Bracket is small.
After installing the RearCamera, I am satisfied with the refreshing appearance.
View detail
Best installation method
The most difficult part of installing a Camera is securing the mounting position. This product is easy to install, looks unobtrusive, and fits in the refreshment area, so I think it is the best installation method for the Rear. View detail
SizeSmallest
I installed the bolt on the front fork, which is supposed to support up to 54mm, but I think it is difficult to use the supplied bolt. I prepared a longer bolt and managed to install it by bending the receiving part. The quality is not good for the price, and the paint is also scratched.
It will probably rust after a while.
View detail
hmm
I guess it can't be helped because it is a combination product, but the pitch of the Bolt where the Number is mounted does not match. Also, in the case of ZX12R, depending on the angle of the Fender Eliminator, the camera mounting part may hit the rear cowl and there will be no space for the camera to be mounted. I had to cut here and there, so I painted it. View detail
The position of the FrontCamera for the DRA RECORDING system.
Mistuba Sankowa EDR-21Gα for FrontCamera.
At first I thought about installing it directly on the light cowl.
It doesn't feel right somehow.
This Light Bracket fits nicely and I am very happy with it.
View detail
Used for Mistuba EDR-21 installation.
Purchased and installed on Mistuba Sankowa EDR-21 for Rear.
I looked around and chose this product.
Install RearCamera with License Plate
It looks neat and clean.
License Plate location so
The rear of the vehicle was captured perfectly without any blind spots.
Installation was very easy.
View detail
The REBEL250 SEdition came with a Large
I bought this for my REBEL 250 SEdition to attach the FrontCamera drrorecorder to it.
of the same product before purchasing this one. "Φ40-Φ45" I bought the Size, but the Size was just a little short, so I bought this additional one.
As a result, this one was too large.
This is "Φ49-Φ54" So I thought I could make it work, but it seems that the middle Φ47 or so is Just fit.
If you are concerned about installation, etc. "Φ40-Φ45" I've also reviewed the Size, so please check it out.
The Bolt could not be installed there, so I used the Tie Band.
This one is too loose, so I put Seat in between.
I can't decide which is better yet, but I don't think there will be a large change if I buy either size, since it doesn't shake that much.
View detail
It was a little short for the REBEL 250 SEdition.
I bought this product because it is compatible with the REBEL 250, but it was not long enough for the SEdition with Fork Boots.
I thought it might be a little loose, but it feels fine for use on regular roads.
Since the Dr-Recorder is made in China, I can't use Bolt, so I use Double-sided Tape to attach it to Bracket.
View detail
For RearCamera!
I've installed it to fix the RearCamera on my Mistuba Sankova front/rear drrorecorder!
I can install it without any problems, so I recommend it to anyone who's going to install a Dramalec!
View detail
RearCamera will fit Refreshing!
I use it for my Mistuba Sankova drrorecorder.
At first I thought that RearCamera is better from the side of License Plate, and I installed OEM Camera Bracket (NanBar mount) of Mistuba Sankowa, but I chose this one because it covers Blinker.
To tell the truth, this had been put in the choice from the beginning, but from the fact that I have made Fender Eliminator, thinking that the space of installation cannot be taken, I selected the one of putting out horizontally, but with Compact more than I thought Camera of Mistuba Sankoowa, it turns out that there is enough space It turns out that there is space, because the one which puts out from the top does Refreshing, it became the purchase again.
Because the Number angle of Fender Eliminator is sleeping considerably, I thought that it was severe in terms of the angle of Camera, but because the installation angle of Camera was also relatively free, it was possible to install Limit without bending.
I hope it's black. It would be nice if they were black. I painted them black after I installed them.
Refreshing around the License Plate, too, and it is highly satisfactory.
View detail
EDR-21G RearCamera
I used it to mount the RearCamera on my EDR-21G.
This in itself is easy to install.
The hole didn't fit, so I bent the Bracket's Camera mounting part and installed it.
View detail
For EDR-21's RearCamera
I tried to make my own with EmonBracket, but if you have such a good bracket, there's no reason not to use it. I was able to mount the RearCamera on it. It was easy to adjust the angle of view. View detail
You don't have to worry about where to fix it.
[How is it used?
I used this product to fix the RearCamera in order to attach the DriveRecorder to the Motorcycle.
Installed model is YZF-R15 (MODEL in 2012) This is a MinorMotorcycle, but the license plate is the same as other motorcycles.
How was your experience with it?
I used it to fix the Dr-Recorder of the unidentifiable Manufacturer of China sold in a certain ShoppingSite.
This was a happy miscalculation, but the position of the holes in the bracket and this product are Exactly the same. (Although it's made with long holes for easy installation.) It was
I was able to attach it perfectly using the included fixing Bolt and Nut, so I'm happy.
After checking out the video, I thought I had made a good purchase with the smallest amount of shake necessary.
How did it compare to other products?
I compared it with KITACO and Posh face's Drraco Bracket.
I chose this product because it had a good rating and the installation image was easy to understand.
【Review】
Bolt nut for mounting was also included and the angle and accuracy was perfect.
At any rate, if you buy DriveRecorder, I think that Rear stay is indispensable though it doesn't matter what kind of thing.
I have several motorcycles, so I also bought a DAYTONA drum recorder as a comparison, but its shape is a little different from the Bracket. I thought it was the same thing, but it's not. Sweat
View detail
It is recommended to mount the Camera on the License Plate Bolt after mounting the Camera.
I bought this for the installation of the RearCamera of Mistuba Sankova EDR-21Gα.
I think it's better to install the camera after you install the camera.
The Nut that comes with the installation is M3 and small, so I didn't have the right tool on hand and lost the Nut and went to the home center to buy one.
Be careful
I bought the one for the upper Left, but I think the one for the upper Right might have been better for the angle of view.
View detail
Maybe not for upright Fork.
I bought this product to install the FrontCamera of Mistuba Sankowa EDR-21Gα, but I tried to install it to the non-moving part of the upright Fork of our vehicle, but I could not find a good position and gave up using this product.
It might be good for Inverted Front Fork.
View detail