Reviews
Used for RearCamera installation of a driverless camera
When I was thinking about where to install the RearCamera when I installed the Mistuba Sankowa EDR-21G myself, I found this product.
Note that the bolt used to attach the Camera Bracket is small.
After installing the RearCamera, I am satisfied with the refreshing appearance.
View detail
Best installation method
The most difficult part of installing a Camera is securing the mounting position. This product is easy to install, looks unobtrusive, and fits in the refreshment area, so I think it is the best installation method for the Rear. View detail
The position of the FrontCamera for the DRA RECORDING system.
Mistuba Sankowa EDR-21Gα for FrontCamera.
At first I thought about installing it directly on the light cowl.
It doesn't feel right somehow.
This Light Bracket fits nicely and I am very happy with it.
View detail
For RearCamera!
I've installed it to fix the RearCamera on my Mistuba Sankova front/rear drrorecorder!
I can install it without any problems, so I recommend it to anyone who's going to install a Dramalec!
View detail
RearCamera will fit Refreshing!
I use it for my Mistuba Sankova drrorecorder.
At first I thought that RearCamera is better from the side of License Plate, and I installed OEM Camera Bracket (NanBar mount) of Mistuba Sankowa, but I chose this one because it covers Blinker.
To tell the truth, this had been put in the choice from the beginning, but from the fact that I have made Fender Eliminator, thinking that the space of installation cannot be taken, I selected the one of putting out horizontally, but with Compact more than I thought Camera of Mistuba Sankoowa, it turns out that there is enough space It turns out that there is space, because the one which puts out from the top does Refreshing, it became the purchase again.
Because the Number angle of Fender Eliminator is sleeping considerably, I thought that it was severe in terms of the angle of Camera, but because the installation angle of Camera was also relatively free, it was possible to install Limit without bending.
I hope it's black. It would be nice if they were black. I painted them black after I installed them.
Refreshing around the License Plate, too, and it is highly satisfactory.
View detail
For EDR-21's RearCamera
I tried to make my own with EmonBracket, but if you have such a good bracket, there's no reason not to use it. I was able to mount the RearCamera on it. It was easy to adjust the angle of view. View detail
You don't have to worry about where to fix it.
[How is it used?
I used this product to fix the RearCamera in order to attach the DriveRecorder to the Motorcycle.
Installed model is YZF-R15 (MODEL in 2012) This is a MinorMotorcycle, but the license plate is the same as other motorcycles.
How was your experience with it?
I used it to fix the Dr-Recorder of the unidentifiable Manufacturer of China sold in a certain ShoppingSite.
This was a happy miscalculation, but the position of the holes in the bracket and this product are Exactly the same. (Although it's made with long holes for easy installation.) It was
I was able to attach it perfectly using the included fixing Bolt and Nut, so I'm happy.
After checking out the video, I thought I had made a good purchase with the smallest amount of shake necessary.
How did it compare to other products?
I compared it with KITACO and Posh face's Drraco Bracket.
I chose this product because it had a good rating and the installation image was easy to understand.
【Review】
Bolt nut for mounting was also included and the angle and accuracy was perfect.
At any rate, if you buy DriveRecorder, I think that Rear stay is indispensable though it doesn't matter what kind of thing.
I have several motorcycles, so I also bought a DAYTONA drum recorder as a comparison, but its shape is a little different from the Bracket. I thought it was the same thing, but it's not. Sweat
View detail
It is recommended to mount the Camera on the License Plate Bolt after mounting the Camera.
I bought this for the installation of the RearCamera of Mistuba Sankova EDR-21Gα.
I think it's better to install the camera after you install the camera.
The Nut that comes with the installation is M3 and small, so I didn't have the right tool on hand and lost the Nut and went to the home center to buy one.
Be careful
I bought the one for the upper Left, but I think the one for the upper Right might have been better for the angle of view.
View detail
Sits great!
Mistuba Sankowa EDR-21Gα for Camera mounting.
If you have trouble finding a place to install the RearCamera, use this one.
All your problems are solved at once!
View detail
The installation of the FrontCamera drrorecorder is very easy.
We have installed this product, which is compatible with the installation of Mistuba Sankoowa's EDR-21Gα drrorecorder.
I was planning to install Stubby on Front fork and put Camera on it, but Stubby is too expensive!
You made a Small leap of faith when you discovered this product. Even this one!
It comes with a mounting screw, but since it is very small, it is necessary to install the Camera in a quantity before installing it in the vehicle.:It is better to Set.
Attach the Bracket to the vehicle and then attach the Camera to the Quantity:If you set it, you will lose Screw.
I wanted to install it as Compact as possible, so I gave it 100 points.
I'm very happy with the way the Camera is mounted.
View detail
Items that make the installation of the Drarecorder Camera easier.
We have installed this product, which is a good match for the installation of Mistuba Sankoowa's EDR-22Gα drrorecorder.
I was initially considering one for the upper Right as it is from the Right Side that I get passed by cars from behind.
However, if you look at your motorcycle from the back, you will see that there is an exhaust system on the Right Side.
I bought the one for the top of the Left because I thought that maybe the exhaust air pressure might scare the Camera or make it dirty.
Since it is a moped, the width of the Number is Small, and the length of the Bracket is the same as 170mm, the Quantity:Pair (for Left and Right) You can adjust it, but if you shift it from the Center to either side, you can see the Bracket.
Bracket length could have been about 20mm shorter.
Also, it comes with a screw for installation, but it is too small to install the Camera with the Bracket on the vehicle.
Once the Bracket is removed from the vehicle, the Camera can be installed.
It has a good amount of wall thickness and is quite solid.
I'm very happy with the way the Camera is mounted.
View detail
high rigidity
I used it to install a Chinese Dr-Recorder and GPS Antennas along with Camera.
It's very rigid, so the Camera image didn't get blurry.
View detail
It fits the Small Type Number with no problem.
We've been in a rear-end collision before on a Motorcycle. "Apparently,
He was thrown into the ICU for brain attendance, and although he came back, he regained consciousness four days later, and it wasn't until a week had passed that his short-term memory was volatile and not written into his long-term memory, and he didn't remember anything from a day ago.
I don't have any memory of the accident, and reluctantly, I was judged to be in a 0:100 rear-end collision with a crazy JJY, and I didn't have enough material to overturn it, so I've been using DriveRecorder since then, except for purely off cars.
I'm a paranoid, so ω
Of course, I installed the Drive Recorder on JA55 CT125CT110 HUNTER CUB as well, but the Endurance model on Ural Sidecar was not so reliable due to the moisture condensation in Monitor. I installed a Drive Recorder with Camera's Monitor
The only problem is the lack of waterproofing on the Monitor;
Then, Order this Camera Bracket to Mount
It's a very special product and has a wide adjustment range with two SmallScrews to hold the Camera.
This is definitely a better option than the stingy and teketotal Bracket
There's no point in using Recorder if it's not useful in a pinch;
Since then, there have been no accidents on Motorcycles other than single-vehicle collisions, and I've been hit by a car 4 times;
For goodness sake, it's BoyScout, but it's a heavy word
View detail