Reviews
Look and feel
Tanks were changed to brembo 17rcs.
I could have used OEMTank, but I wore it for looks.
After all, satisfaction is Outclassing.
View detail
Parenthesis OK
I bought the Titanium color because it was the only one in stock at the time of my purchase, but I like Parenthesis.
MASTER is working fine for Corta CORSA.
View detail
Good
This brake master cylinder oil tank support with brembo oil tank look simple and the oil tank position is just right, not too high not to low.Good looking.I buy that with brembo rcs15,that is pretty match.When you know how to bleed the air , the installation is not too much difficult .That is little bit expensive but i think the looking is better than brembo .Webike shipping is fast and packaging is good. View detail
For brembo CORSA Short.
Installed on brembo CORSA Corta.
It ponts on with no problem and looks and feels Refreshing.
View detail
Solid for the price
Solidly built, safe to use and looks good. View detail
For ZX-6R
What made you decide to buy?
After taking delivery of the ZX-6R Someday I'll have a Brembo caliper!" I had planned to finish with Master Cylinder and Brake line, but when I happened to wander around Webig, I found a …Brembo caliper at a discount price, and I almost bought it on impulse. I was going to finish with the Brake line, but I happened to be browsing through Webig and found …Brembo caliper at a low price, so I bought it almost on impulse. PLOTbrembo Offset collar 9mm purchased
[How was the installation?
Before purchasing the Offset collar, I read the description section of the PLOT and found something I didn't understand… Brembo radial caliper is "CaliperA". "CaliperB fits." I have been trying to find out what it means on the Net, but I can't. I called the manufacturer to find out. They said that they could not guarantee the product because they had not confirmed that it was compatible with any other models than the ones listed.
So I checked my ZX-6R. 6ROEMFront Disc is 310mm. I checked the disc and pad contact surface and there was about 1-2mm of space under the pad, so I took a chance and bought a 9mm Offset collar. What a JUST MEET!
[As an aside.
The offset collar I purchased is listed as compatible MODELZ900RS and Universal. However, it was discovered that the offset collar cannot be installed on Smooth. (Sweat) I thought I would go to Smooth because we are both Kawasaki, but … the place that didn't go to Smooth was Where we reuse OEM dwell Pin." I checked if the Z900RS dwell pin and the ZX-6R dwell pin are different, but the OEM parts numbers are the same for both. So, I measured the dwell pin on the offset collar with a caliper and found that the difference was a few millimeters in comma, so I used a drill to grind the dwell pin with paper while rotating it and checked it with a caliper several times before I was able to install it. I do not know if my 6R dwell pin was special or not, but if the dwell pin did not fit, it was either due to grinding or thermal expansion. I was worried that thermal expansion would cause discoloration when the collar was heated, so I polished mine. (Please consider this for reference only.)
I found the GROM to be very informative and helpful when customizing, but unfortunately the ZX-6R has less information. If you have any questions, please feel free to contact us. View Service Manual I'll check with the Manufacturer and have various conversations with the person in charge." And before I know it, I'm killing it. I hope this information will be of help to owners who are planning to customize their ZX-6R! I will publish the information for your reference.
How was your experience with it?
RadialMonoblock caliper M4 on 6R OEMFront Disc 310mm sutra without incident. "CaliperB fits." has been installed.
View detail
Security as well.
What made you decide to buy?
After taking delivery of the ZX-6R Someday I'll have a Brembo caliper!" I had envisioned this. Then, my first tinker of 2023 was to strengthen the Brake! Originally, I was going to finish with Master Cylinder and Brake line, but when I happened to wander around Webig, I found …Brembo caliper at a discount price, so I almost bought it on impulse. In order to install this Brembo caliper that I bought on impulse without any worries. PLOTbrembo Stainless SteelCaliper Mount Bolt I chose and purchased a
[How was the installation?
To install Brembo caliper, Offset collar is required. So we prepared PLOTbrembo Offset collar Offset amount 9mm. In the explanation column, it says If the Z900RS is equipped with the CaliperB, the OEM Mount Bolt can be used. The OEM mount bolt length for the ZX-6R is approximately 62mm.
We chose PLOT because they are sold by other manufacturers, but we chose PLOT because they are the best choice for this Mount Bolt. The reason why we chose PLOT is that this Mount Bolt requires the T50SizeSocket for Hexalobular/Torque tool for tightening, so it cannot be easily removed. (Nothing can compare to PRO for theft, though …) We chose PLOT for its good design and security.
Please note that there is a law that states that only the owner of the motorcycle or a licensed mechanic can perform maintenance and parts replacement related to the brake. I am a former Owner." Please use this as a reference only, as we have performed maintenance on the
How was your experience with it?
I think the custom feel and security has been improved… but the functionality remains the same.
View detail
Necessary Parts for bremboRCSRadial
What made you decide to buy?
Someday I'll get a brembo!" I have been envisioning this since I took delivery of my ZX-6R. Such is the year 2023. Brake Enhancement." I finally decided to install a 19RCS Radial Brake Master Cylinder as one of the brake enhancements, which is necessary since I don't have an oil tank. I chose the PLOT product because I found a lot of information about it.
[How was the installation?
First, attach the oil tank and bracket to the Master CylinderClamp and position it. SSMotorcycle also has a cowl and screen, so make sure the position does not interfere with them. After positioning, check the length of the oil hose and cut it. If you cut the oil hose too short, you will not be able to go back, so it is recommended to cut it a little longer for fine adjustment.
Please note that there is a law that states that only the owner of the motorcycle or a licensed mechanic can perform maintenance and parts replacement related to the brake. I am a former Owner." Please use this as a reference only, as we have performed maintenance on the
How was your experience with it?
The custom feeling has increased immediately. I can't stop grinning over the Shield because it's the most visible place when I'm driving. (Mirror shield so you can't see it from the outside)
bremboMark is a nice One point.
View detail
Installed on GSX R1000
Purchased due to the need for color due to Caliper changes.
OEM location and was Exactly
View detail
Used for Suzumbo replacement
Installed on a GSX-R1000R 2019
Front brake caliper from OEM Suzumbo to brembo220Series (GP4-RB) used to replace the
Offset volume is 14mm.
Basically, it is determined by the positional relationship between the seat and the pad, so if you are replacing the Suzumbo with a Caliper of the same dimensions as the 220Series, it can be used for any model.
Since it is matte black anodized aluminum, it will blend in well with the black bottom bracket of the OEM suspension.
It is a little expensive to think of it as just an M10 collar, but it is not just a collar, as it is positioned in-low with the Caliper's seat.
Also, for Caliper colors are often unnaturally expensive, but the price is relatively reasonable among them.
It is unknown whether a general aluminum collar can be substituted for the collars, but it is safer to use a dedicated collar since it is around the brake.
In that sense, I would say that it is an excellent cosmetic product in its own right.
View detail
Fits: YAMAHA RZ350, YAMAHA XJ400ZS, YAMAHA XJ400ZE, YAMAHA XJ400Z, YAMAHA XJ400, YAMAHA XJ400D
Perfect, and just what I wanted
The caliper supports arrived very quickly all the way from Japan and the parts are of very high quality and fit perfectly. I will be fitting them to my UK 1980 Yamaha RD350LC (4L0) (also known as RZ350 in other countries) and I am very pleased with them. When I have fitted them I will attach another photo to this review. View detail
PLOT Proto Brembo Offset Collar 4 pcs
This Plot Proto Brembo Offset has very nice quality, nice fit and finish. Very easy to install. Item was shipped fast and well packaged. I would recommend this part. View detail
Fits: YAMAHA RZ350, YAMAHA XJ400ZS, YAMAHA XJ400ZE, YAMAHA XJ400Z, YAMAHA XJ400, YAMAHA XJ400D
Relief
I bought this because I went with brembo.
Of course, Exactly is attached, but you need to adjust the Shim to get Center.
View detail
I think it's fine, but at your own risk.
I used it in the field where I put brembo4POD on VT250 SPADA.
The one I received is the one with no problems.
The BoltQuantity is included with the Caliper.:There are 2pc.
Be sure to check the fastenedTorque properly.
I think the Pad on the inside diameter side of the disc is slightly sticking out.
I tried to put it as far out as I could, but it was still too far. (;^ω^) It's like
What does it look like in RS?
Didn't seem to be a problem on the test drive.
It may be that it is still a self-responsibility as long as the conformity is not indicated by Manufacturer.
I don't think you'll have to spend a lot of money on Ok.
View detail
That's what I get for brembo!
I replaced the brake lever with a brembo brake lever, so I replaced it with this product.
The tank is a brembo OEM Smoke Type, so it gives a sense of ownership!
View detail
This is for the brembo master!
I fitted this Tank with a Kit to match my brembo CORSA Corta 17mm.
The vehicle is SEA BASSGSX-S1000F.
I fastened it to the upper side of the Mirror Holder and put the thin side of the attached collar between it and the Holder.
The other collar that comes with it is about 5mm thick.
Hose was settled in just right, without a cut.
It's black and has a unified feel, carefully finished and not cheap.
View detail
It purchased, in order to attach a Brembo caliper to VTR-F. Although the Support of the Active was also good, since it seemed that there was only a PLOT, the object for one side was decided to be this. It is beautifully satisfied with the simple Des
It purchased, in order to attach a Brembo caliper to VTR-F.
Although the Support of the
Active was also good, since it seemed that there was only a PLOT, the object for one side was decided to be this.
It is beautifully satisfied with the simple Design of structure.
View detail