Reviews
Baptized Design!
I think it's a pretty cool design! Vibration proof and single cylinder Motorcycle
But it doesn't sound scared, so it's RECOMMENDATION!!!
View detail
Used for Suzumbo replacement
Installed on a GSX-R1000R 2019
Front brake caliper from OEM Suzumbo to brembo220Series (GP4-RB) used to replace the
Offset volume is 14mm.
Basically, it is determined by the positional relationship between the seat and the pad, so if you are replacing the Suzumbo with a Caliper of the same dimensions as the 220Series, it can be used for any model.
Since it is matte black anodized aluminum, it will blend in well with the black bottom bracket of the OEM suspension.
It is a little expensive to think of it as just an M10 collar, but it is not just a collar, as it is positioned in-low with the Caliper's seat.
Also, for Caliper colors are often unnaturally expensive, but the price is relatively reasonable among them.
It is unknown whether a general aluminum collar can be substituted for the collars, but it is safer to use a dedicated collar since it is around the brake.
In that sense, I would say that it is an excellent cosmetic product in its own right.
View detail
Fits: YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3
Rear will be cool!
I bought this one because I liked the position of the Blinker the best.
The Wiring also fits in the Cover to some extent, so there was no problem even if it rained a little, although I did not apply any special waterproofing treatment etc.
View detail
Used for VTR1000SP
It is Repeater because it is cheap and easy to turn. I appreciate the variety to choose from. View detail
Stable charging even with iPhone
It was installed at the Shop when the vehicle was purchased.
At first, I was thinking of using a DAYTONA product, but the shop staff told me that DAYTONA's charging was not reliable for the iPhone, and I had an idea, so I chose this product.
I am satisfied that the battery is charged the same way it is at home or in the car.
View detail
It has attached to WR250R. Isn't it the dress-up effect up?
It has attached to WR250R.
Isn't it the dress-up effect up?
View detail
Fits: YAMAHA RZ350, YAMAHA XJ400ZS, YAMAHA XJ400ZE, YAMAHA XJ400Z, YAMAHA XJ400, YAMAHA XJ400D
Perfect, and just what I wanted
The caliper supports arrived very quickly all the way from Japan and the parts are of very high quality and fit perfectly. I will be fitting them to my UK 1980 Yamaha RD350LC (4L0) (also known as RZ350 in other countries) and I am very pleased with them. When I have fitted them I will attach another photo to this review. View detail
PLOT Proto Brembo Offset Collar 4 pcs
This Plot Proto Brembo Offset has very nice quality, nice fit and finish. Very easy to install. Item was shipped fast and well packaged. I would recommend this part. View detail
Fits: HONDA NC750X, HONDA NC750S, HONDA NC700X, HONDA NC700S
Cost-effectiveness is ….
Quality is fine.
Although there are many Chinese copies available in the market, it is good for your mental health because it is made by a reliable manufacturer.
Installation is easy, as all you have to do is shift the Radiator and insert it, but the Edge is sharp, so hand protection is a must.
Radiator's protective effect, of course, has also improved its appearance.
If it were a little cheaper, there would be nothing to say….
View detail
Touring Companion.
I bought it to run Senrihama Nagisa DriveWay.
There are also holes for attaching ropes, making it easy to use.
It is likely to be able to use it in Touring destination other than Senrihama.
View detail
I use it in my home Garage.
I use this product at home in Garage and I like it because it prevents Rust from sticking to Concrete on rainy days. View detail
Caps are consumable.
I decided it was time to replace the Radiator cap on my CB400SB. I like it because it is Reasonable and cooler than OEM. View detail
It's nice
I bought a used TRX850 that was a Fender Eliminator with a Silver T-Bracket and a square Reflector.
The bracket is black and I like the shape of the Hexagonal, so I bought it.
It's better now. If I could do a little more reduction in cost, it would be great.
View detail
I expect it to be durable.
I've been looking for a large stone to put under the side stand when I park on uneven terrain when I'm touring.
It became a hassle and I bought this one.
I used to use an unnamed manufacturer's product for the Garage, but the reverse side was cracked in small pieces and I rejected it.
I'm going to use the large STANDPad I bought the other day for Garage and this one for touring.
Now I expect it to be durable enough not to crack.
View detail
After all, cbr1000rr-rSP is now a Recall
I've been thinking that the RadiatorCap on the CBR1000RR-R is fishy.
I was thinking and bought this product. I was waiting for the Recall to be delivered because I didn't want the Engine to burn up on the ride.
It is now a Recall and will be replaced next time.
I bought this product to try because the Engine has a very high heat level. The opening valve pressure is 1, 3 but there is no problem, in my opinion.
View detail
Fits: YAMAHA RZ350, YAMAHA XJ400ZS, YAMAHA XJ400ZE, YAMAHA XJ400Z, YAMAHA XJ400, YAMAHA XJ400D
Relief
I bought this because I went with brembo.
Of course, Exactly is attached, but you need to adjust the Shim to get Center.
View detail
For weak legs and feet (laughs) a twist
I used Magic tape to attach it to the Tank end for Breaking and Machine Hold in Circuit driving.
You can add a piece or two to the Position of your choice.
I did not hesitate to fail because of the low cost.
It's very good.
View detail
It's a bit forced. Crying 。
This is a must have part for brembo installation.
I was not sure if it was Radial Mount or Axial Mount, but Axial is enough because it is OverQuality.
To install, just mount it on the Front fork and assemble the Caliper.
However, Aluminum Cut-out is not the same as "It's just the way it is. The feeling is ……
I think GCraft's Black Anodized Aluminum was more natural. (Sweat) 。
View detail
Design is a good idea (depending on the type of car and the direction you are going).
The size is the same as the image.
The mounting is done by friend-tightening the NumberMounting Bolt. In some cases, it may be better to increase the bolt length by 0.5mm.
I love the fact that it is legal without interfering with the Image that I want to lighten the Rear under Number and without being too assertive.
View detail
I think it's fine, but at your own risk.
I used it in the field where I put brembo4POD on VT250 SPADA.
The one I received is the one with no problems.
The BoltQuantity is included with the Caliper.:There are 2pc.
Be sure to check the fastenedTorque properly.
I think the Pad on the inside diameter side of the disc is slightly sticking out.
I tried to put it as far out as I could, but it was still too far. (;^ω^) It's like
What does it look like in RS?
Didn't seem to be a problem on the test drive.
It may be that it is still a self-responsibility as long as the conformity is not indicated by Manufacturer.
I don't think you'll have to spend a lot of money on Ok.
View detail