Reviews
Packing size didn't fit.
Rubber's PackingSize didn't fit, but the FilterBody fit properly.
Currently there are no problems.
You picked the wrong part number, so you were packing the wrong thing …
View detail
Seriously cheap.
This is really cheap. There was a store that carried this until a while ago, but it seems they no longer carry it at all. The good thing about this WR is that it's cheap, so it's easy to get a good setting out of it. You can buy several and try various things. Also when you want to save money on consumables. It is useful. I am thankful for the poor life. View detail
Think of it as a FilterSingle Body and you're OK.
Attached O-Ring is Quantity:2pc. Both sets were too thin to be useful.
I think it's because of the use of other models and insufficient conformity check.
The filter itself is fine.
View detail
Fits: YAMAHA JOG 3YJ, YAMAHA JOG ZR, YAMAHA JOG 3YK, YAMAHA JOG ZR, YAMAHA JOG 3YK, YAMAHA JOG 3YJ, YAMAHA JOG ZR, YAMAHA JOG 3YK, YAMAHA JOG 3YJ
It can be used normally.
Glue from the back of the Seat cover seam to protect the Seat Sponge from moisture. and installed on top of the Sponge covered with Polyethylene Seat. It was. You will need a strong Tucker to install it. It can be used normally. View detail
Fits: HONDA RUNAWAY, HONDA Live Dio Cesta, HONDA LIVE DIOSPECIAL Knife, HONDA LIVE DIOJ, HONDA LIVE DIO, HONDA PAX CLUB, HONDA TODAY, HONDA DIO FIT, HONDA DIO CHESTA, HONDA DIO, HONDA TACT BASIC, HONDA TACT STAND-UP, HONDA TACT, HONDA SMART DIO, HONDA ZOOMER, HONDA SUPER DIO, HONDA GIORNO CREA, HONDA Giorno, HONDA GIORCUB, HONDA JULIO
Satisfied
To replace the rear brake shoe 。
I was able to install without problems 。 Does it work as well as the OEM, etc., or a little better?
There is no squealing, and the costuming is very high
This time it was Rear, but I think I'll use this for Front as well
View detail
Fits: HONDA GB250 CLUBMAN, HONDA ToRAN Salve 600V, HONDA CUB PRESS, HONDA XL250 S, HONDA XL250 R, HONDA NX650Dominator, HONDA CBX250 RS
cheap
I used it on a GB250 model 2. I replaced it with an OEM Shoe, but the one I bought looked I thought it was crappy I can't blame them because of the low price, but the thickness of the wear area was not uniform
It's a Motorcycle that I use for commuting to work, so I guess it's okay, but I'm Touring If you use it, you should buy something better
View detail
Fits: YAMAHA TT-R125 LW, YAMAHA YB-1 four, YAMAHA YB-1 four, YAMAHA YB50 four, YAMAHA GEAR BA50, YAMAHA GEAR, YAMAHA MATE V50 D, YAMAHA MATE V50 D, YAMAHA MATE V50 D, YAMAHA MATE V50, YAMAHA MATE V50, YAMAHA MATE V50, YAMAHA Newsmate V50N, YAMAHA Newsmate V50N, YAMAHA Newsmate V50N, YAMAHA Newsmate 90, YAMAHA Newsmate 90 T90N, YAMAHA newsgear, YAMAHA News Gear (4ST) BX50N, YAMAHA News Gear BA50N
Cospa strongest
I was worried about it being cheap, but it's nothing to worry about
It will stop
Brake noise sometimes occurs after rain
I don't know how long it will last, as I've just started using it
View detail
Fits: SUZUKI INTRUDER CLASSIC, SUZUKI TL1000 S, SUZUKI TL1000 R, SUZUKI SV650, SUZUKI SV400, SUZUKI SV400 S, SUZUKI SV1000, SUZUKI SV1000 S, SUZUKI RF900 R, SUZUKI LC1500 INTRUDER, SUZUKI GSX750 F, SUZUKI GSX400 IMPULSE, SUZUKI GSX1400, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R1100, SUZUKI GSX-R1100 W, SUZUKI GSX-R1000, SUZUKI GSF750, SUZUKI GSF1200
I thought the costumes were good
I was worried about the price, but the product itself works fine
I don't know the performance, but I think that there is no difference between the OEM Product and Large in the construction
If there are no problems until the next Oil replacement, I would like to REPEAT it
View detail
Filter
Visually very decent quality. I got up perfectly. I didn't have to cut anything. I was especially pleased with the delivery to St. Petersburg, less than three weeks. Visually very decent quality. I got up perfectly. I didn't have to cut anything. Particularly pleased with the delivery to St. Petersburg, less than three weeks. translated by google translate View detail
Cylinder
Excellent service & item as described. Perfect replacement top end for a stock standard Jog-50 View detail
Fits: YAMAHA XJR400R, YAMAHA FZR400RR 90-94, KAWASAKI ZZR1400, KAWASAKI ZXR, KAWASAKI ZX6R, KAWASAKI Z750, HONDA SUPER FOUR 92-96, HONDA VLX400, HONDA GL1500, HONDA CB400, HONDA CB1300SF, KAWASAKI XJR400R, HONDA CB400, HONDA VLX400, HONDA Super Fore 92-96, KAWASAKI XJR400R, KAWASAKI Z750, KAWASAKI ZX6R, KAWASAKI ZZR1400, YAMAHA FZR400RR 90-94
Cheap
I used the PFP Oil Element when I changed the oil in my CB1300 (SC40) It was
Installation is not a problem and it is comparable to OEM
I don't know how dirty the Cartridge-type Oil Element is, so I'm not sure if the Oil Element is clean or not I change the replacement every three times I don't run a lot of miles, so I change the Oil every six months, at about 6,000? Element exchange
I would use it again as it is inexpensive
View detail
You're okay with it if you can trade yourself
It's a commuter vehicle that has only touched the weight roller
If you're a do-it-yourself replacement person, you can run about 5,000 miles
No problem
Once it goes 10,000 miles, it's a burst (Lol)
At least 8,000 kilos
Cost performance is good
View detail
Defective item
I bought a MAJESTY250 (4d9) for the rear, but the bolt holes to install are It was difficult to install it as it is because its position does not match the body of the car If you can't process it by yourself, this product is Garbage rubbish I made the existing Bolt hole 2 times larger than the existing Bolt hole and made the hole bigger with the Drill of the Large texture This is a processing installation In addition, I was concerned about the area of the pad because the diameter is smaller than the OEM It is View detail
Fits: YAMAHA Majesty 125 (FI model), YAMAHA Majesty 125 (Cab), YAMAHA Majesty 125 (FI model), YAMAHA Majesty 125 (Cab)
Normal good
I needed a MAJESTY125Fi DriveCase Gasket, so I bought one!
This Quantity:The price is good for the set
Well, I'm sure there are some Gasket that you don't use, but it's a relief to have it when it's needed
View detail
Fits: YAMAHA Majesty 125 (FI model), YAMAHA Majesty 125 (Cab), YAMAHA Majesty 125 (FI model), YAMAHA Majesty 125 (Cab)
Mostly satisfied
I'd like to get some good gaskets for the engineOH of the 125 MAJESTY this time I was looking for this Quantity:I found the set
Basically, if you buy this, you can do OH below the waist
It's hard to say how durable it is because we just started to use it, but so far, the gasket has been torn off while driving and it's a very good quality product I don't feel like I'm causing a compression leak with the
View detail
Fits: SUZUKI Birdie4ST Burden|FB50L, SUZUKI Newspaper Birdie4ST|FB50P, SUZUKI Newspaper Birdie4STG|H|FB50PH, SUZUKI EPSILON 150 Newspaper Birdie2ST, SUZUKI DF200 DJEBEL, SUZUKI DF200 DJEBEL, SUZUKI DF125 DJEBEL, SUZUKI Volty type C TU250, SUZUKI Volty type C, SUZUKI Volty type I TU250, SUZUKI Volty type I TU250, SUZUKI Volty type I TU250, SUZUKI Volty type I, SUZUKI Volty type I, SUZUKI Volty type I, SUZUKI Volty type II TU250, SUZUKI Volty type II, SUZUKI Volty type T TU250, SUZUKI Volty type T, SUZUKI MARAUDER250
good
The DF200 DJEBEL's Rear brakeTouch
We've got some complaints
I replaced it with a PFPBrake Shoe
Low cost but acceptable for use
Compared to the OEM Product, the aluminum shape of the body is
Reduction in cost?
I'm a little nervous about the look and the strength of it, but …
There is no problem for now
BrakeTouch is a little lighter than the above
Brake works well
View detail
inexpensive and good quality
It's a Repeat, inexpensive but durable, I've driven 2000km Meter! but it didn't have much wear I think it's a bargain View detail
Fits: HONDA SUPER CUB F, HONDA SUPER CUB F, HONDA press cub, HONDA Spacey 125, HONDA FTR223, HONDA Super Cub 110 F, HONDA press cub, HONDA Spacey 125, HONDA FTR223, HONDA Super Cub 110 F
I chose it because it was less expensive
It was a replacement for the OEM Product, but I chose it because of its low price Fee Ring-wise, it is very normal It is not enough to lock even if you apply the full rear brake
The OEM Product we replaced still looked like the Shoe, but the Dust, etc It was not working well By the way, the first exchange at 65,600?
Now, I hope it's durable, but the next time I'm going to replace it, I'm going to say a little sooner, but it's about 20,000 miles Isn't it?
View detail
Easy to use
Easy to use and inexpensive, Cut in Scissors and Engine oil If it gets dirty, wash the whole thing with kerosene
Let it dry and you can use it a few times!
View detail
Fits: YAMAHA JOG 3YJ, YAMAHA JOG ZR, YAMAHA JOG 3YK, YAMAHA JOG ZR, YAMAHA JOG 3YK, YAMAHA JOG 3YJ, YAMAHA JOG ZR, YAMAHA JOG 3YK, YAMAHA JOG 3YJ
You need the knowledge!
The Seat was torn, so I replaced it with a new Seat The texture is so new
It slips when you sit down At first, I thought it was inevitable
Later, if you've never replaced a new Seat, you'd better get a motorcycle shop to do it for you!
View detail