Reviews
Satisfied with the feeling of use! Cheap!
Since there is still almost no mileage, the feeling of durability and wear is
I do not know, but firm feeling and uniformity are solid
When Fitting Smooth Fit to Smooth.
Feeling with Pulley boss and Pulley face was also good feeling.
View detail
Fits: HONDA CB400 TT MKII, HONDA DRZ110, HONDA CB400 TT, HONDA GB400 F, HONDA KLX125, HONDA KLX250 S, HONDA XL125 V
PFP Oil Filter
This PFP Oil Filter can be used safely.
I used only this PFP Oil Filter in Oil Filter other than OEM.
Filter capability is very high because it is a fine filter paper Filter, but it has good oil permeability and balanced good Oil Filter has become.
However, since there was a description with Maid in Thailand one, I was worried about using it for the first time, but since I have used it for many years, clogged Filter and torn the filter paper, etc. Oil Filter's Trouble has never been at ease I think that it is a product that you can use.
By the way, I bought HONDAOEM 's Oil Filter, but I did not know where I was making a maid in.
However, in this case it was a HONDAOEM Product so there was no worry or anxiety.
Recently, in addition to HONDAOEM's Oil Filter and this PFP Oil Filter, there are many kinds of Oil Filters corresponding to several others, so the selection range is increasing.
This PFP Oil Filter, like other manufacturer's Oil Filter, is MagnetSpec. Although it is not something, it is an Oil Filter that can be used with confidence at a low price.
Although I was also exchanging the Oil Filter at the same frequency as Oil exchange for one year from the time of new cars, it is now possible to replace the current Motorcycle (HONDA CRF250L) Then, this PFP Oil Filter 1 pc. Although I am using about 10000 km running, when I exchange it, there is still more (+ 10000 km or more) You can check the Beauty state that you can use.
However, since we open the Oil Filter Cover and exchange the Oil Filter Cover Gasket, we may be able to use it still more, but we also try to replace the Oil Filter with a new one.
Because it is such an expendable item's Oil Filter, the one with the low unit price as much as possible is very appreciated as User.
Recently, thanks to the entry of other companies, this PFP Oil Filter is more sophisticated (Magnet type) Products, such as this PFP Oil Filter, etc.. Despite being a product, Oil Filter, which is less than 20% cheaper than this PFP Oil Filter, has also appeared on the market, but I'd like to continue to use this PFP Oil Filter for the future.
.
View detail
Fits: HONDA CB400 TT MKII, HONDA DRZ110, HONDA CB400 TT, HONDA GB400 F, HONDA KLX125, HONDA KLX250 S, HONDA XL125 V
PFP Oil Filter Commercial Product No : PF1005
This PFP Oil Filter PF 1005 is an Oil Filter that I often used for 3 and half years.
After using OEM's Oil Filter twice the first in HONDA 's service development, we are indebted to this PFP Oil Filter PF 1005 for the time being.
This PFP Oil Filter PF 1005 does not know the difference even if you compare the filter paper part with the Oil Filter of the OEM.
I do not know whether OEM Oil Filter is good or not, I do not know whether this PFP Oil Filter PF 1005 is good, but I was using this PFP Oil Filter PF 1005 because it was easy to obtain.
I am exchanging the Oil Filter with a running distance of 10000 km as a guide. It is about once a year exchange frequency.
There used to be no trouble so far and there were times when we confirmed that we had secured a lot of Gold sesame powder by fine filter paper but recently we broke the filter paper after exchanging the Oil Filter and confirmed the inside of Filter It is not in anything.
As I have been riding for 3 and a half years, the Gold genus in Engine oil seems to be lost considerably.
(Magnet Drain Bolt still has a little gold powder. )
This PFP Oil Filter PF 1005 is an excellent product that has no problems with HONDAOEM as well as other companies' Oil Filter, but in fact the price was higher than OEM Filter in OEM.
Writing an Impression and getting a point or buying it during Sale, I will do the same with OEM's Oil Filter etc. It will cost about a cheaper price a little more.
However, if the OEM Product is 5% Off Sale, the Oil Filter of OEM Product is less expensive.
So when this PFP Oil Filter PF 1005 cheaper at Webike's Sale it is said that it can be solved by buying multiple Large people.
Since Oil Filter is a consumable item, it is psychological that you want to eliminate the wasted Gold amount as much as possible if the product qualities are the same.
This PFP Oil Filter quotient Product No. : When purchasing PF 1005, it is probably good if you target the inside of Sale by all means.
.
View detail
Used for XJR 1300
Oil Filter Body was attached according to the conformity, but the attached oRing had a size smaller than the OEM one size smaller.
Oil leaked as it is, so people who use it for XJR 1300 should better prepare OEM oRing.
View detail
Fits: HONDA CB400 TT MKII, HONDA DRZ110, HONDA CB400 TT, HONDA GB400 F, HONDA KLX125, HONDA KLX250 S, HONDA XL125 V
PFP Oil Filter
【What made you decide the purchase?】
In the summer of 2012, I searched Net for Oil Filter of HONDA CRF 250 L's Other Company Product, but did not do Hit.
If it seems that Engine searched Net for Oil Filter of HONDA CBR 250R Other Company Product of the same type, it was this PFPOil Filter that did Hit.
As it is a consumable item, it is the first time I purchased multiple items.
【How was it actually used?】
Motorcycle 500 mile from new car time - 1000km - 3000km - I exchanged the Oil Filter at 5000 km.
(Hereafter, Oil Filter replacement run every 10000 km)
As expected the first waste oil was GLITTER guitar, but thanks to the filtration capacity of this PFPOil Filter, Oil gradually calmed down every Oil exchange.
Thank you very much for this PFPOil Filter.
Pretty good etc. It's a raw Oil Filter.
【Mounting was difficult?】
There are two types of Oil Element, Cartridge Type and Filter Expression.
This PFPOil Filter is the type of Filter expression of Oil Element.
Compared to Cartridge Type's Oil Element exchange, it is a bit annoying but it is not difficult as it is just a matter of exchanging old and new.
【Please tell me the installation point and hang】
Oil Filter replacement is basically carried out when engine oil is exchanged.
After the initial run of the new car, basically I am doing maintenance of Oil Filter 1 change for Engine oil change 2 times.
[Is there anything I was disappointed about?]
Since I first bought this PFPOil Filter, I continued to purchase it for 3 years or more as it was, but recently other companies' same etc. We discovered that the Oil Filter above sold more than 20% cheaper than this PFPOil Filter.
I felt somewhat damaged rather than saying I was disappointed.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Multiple companies' same etc. Products with Oil Filter etc.. I would like the price of.
【Have you compared items?】
Previously, only the OEM Product compared, but now there are many different high-performance and low-priced items sold from other companies.
.
View detail
For Setting
【What made you decide the purchase?】
The price is cheap and Quantity : 1 Set of 6pcs. , And that PFP Parts were good for cheap reasons.
【How was it actually used?】
Can be used without problems.
Weight error also average 6. As it is 06 g, it is not bad.
As the nominal weight is printed on the surface, it is easy to distinguish GOOD. However, it disappears when used.
【Was it difficult to install? (Hard parts case)】
It's easy because it's Roller with no directional designation.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Let's clean up inside the VARIE. Because of rubbish such as Belt kettle, Roller may cause uneven wear.
[Is there anything I was disappointed about?]
If there is, the written position of the weight. It's better than nothing.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Perfect if it is color coded per weight if possible.
【Have you compared items?】
KITACO / DAYTONA / Posh / Malossi / Othersetc...
Large Roller is less than the nominal weight 0. There is an error of about 1 g.
Since Poh's weight is described in Roller, the user-friendliness is good, but on the other hand, the error is surprisingly large and the error is 0, 0. It was very different 2g.
In the old KITACO Roller, the assembling direction of rotation is specified, and when it is assembled in the opposite direction, the core pops out. Instead? The colors are different for each weight, and the identification was easy.
Malossi's Roller does not designate the direction of rotation, but when we face the face on which the weight is printed facing backwards it rubs and disappears.
Other OKO and FireFoxOthers unnamed Made in Taiwan Roller are somewhat sweeter in accuracy, weight error 0. Many of them exceeded 1 g and BALI was also present.
[Others]
In addition to HondaDIO, Roller of this 16X13 size is PIAGGIO 50cc, Malossi's Multi-Variator (Pulley Kit) And OthersEurope type VARIERER.
View detail
For Setting
【What made you decide the purchase?】
Anyway, I place importance on the price inexpensiveness, but since PFP's Parts were good for many reasons.
【How was it actually used?】
It can be used without problems, the error is 6 average 0. It is pretty excellent with 03g.
Although it is easy to use it that weight is described in Roller itself, since it is a Roller surface, it disappears when used.
【Was it difficult to install? (Hard parts case)】
It's easy because it's Roller with no directional designation.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Let's clean up inside the VARIE. Because of rubbish such as Belt kettle, Roller may cause uneven wear.
[Is there anything I was disappointed about?]
Although it is better than nothing, the weight print is about to disappear.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Perfect if it is color coded per weight if possible.
【Have you compared items?】
KITACO / DAYTONA / Posh / Malossi / Othersetc...
Large Roller is less than the nominal weight 0. There is an error of about 1 g.
Since Poh's weight is described in Roller, the user-friendliness is good, but on the other hand, the error is surprisingly large and the error is 0, 0. It was very different 2g.
In the old KITACO Roller, the assembling direction of rotation is specified, and when it is assembled in the opposite direction, the core pops out. Instead? The colors are different for each weight, and the identification was easy.
Malossi's Roller does not designate the direction of rotation, but when we face the face on which the weight is printed backwards, the print rubs off and disappears.
Other OKO and FireFoxOthers unnamed Made in Taiwan Roller are somewhat sweeter in accuracy, weight error 0. Many of them exceeded 1 g and BALI was also present.
[Others]
In addition to HondaDIO, Roller of this 16X13 size is PIAGGIO 50cc, Malossi's Multi-Variator (Pulley Kit) And OthersEurope type VARIERER.
View detail
Beware of rainy days
Purchased by price Purchase.
Although there is no problem on a sunny day, on rainy days it will hardly stop even if you grab the Brake lever with Full power. People riding on rainy days is better to refrain from purchasing.
View detail
Fits: HONDA CB400 TT MKII, HONDA DRZ110, HONDA CB400 TT, HONDA GB400 F, HONDA KLX125, HONDA KLX250 S, HONDA XL125 V
PFPOil Filter
【What made you decide the purchase?】
I exchange the HONDA CRF 250 L Oil Filter I ride so that I exchange the Oil Filter Cover's Gasket once every 2 times.
Until we started using this PFPGasket, we used HONDAOEM's Gasket once every time with HONDA DREAM, but this PFPGasket is more cost-effective so we now purchase Repeat.
【How was it actually used?】
Oil Filter If it is the first replacement, if Filter cover 2nd opening and closing is also done, engine oil may bleed out from Gasket, so before switching off it, Gasket of Oil Filter Cover is replaced with a new Gasket of this PFP I try to keep it..
As expected, when exchanging for this new PFPGasket, leaking out of Engine oil to Gasket will disappear as soon as to tighten Bolt 4 of Oil Filter Cover lightly with a fingertip.
【Mounting was difficult?】
it's simple.
When exchanging Engine oil and Oil Filter, simply remove the old Gasket and exchange it for this new Gasket.
【Please tell me the installation point and hang】
Oil leakage and oozing out from Gasket are mostly subsidized if Oil Filter Cover's 4 Bolts are tightened up again, but because Bolt may be broken by retightening, it is enough for Bolt retightening Be careful.
Considering that the Oil Filter Cover's Mounting Bolt will be tightened and folded again, even if Oil is leaking or leaking from Gasket for a while or oozing, Oil enters the Engine until Oil gauge's LOWLine at daily inspection If it is, there is no problem.
Let's not forget to replace Gasket at the next Oil and Filter replacement.
[Is there anything I was disappointed about?]
It is not particularly.
【Hope for Manufacturer - Please let me know if you have any improvement points]
In the future please keep the price unchanged.
【Have you compared items?】
It compared with OEM Gasket of HONDA.
I do not understand the quality difference other than the price at all.
.
View detail
Fits: HONDA CB400 TT MKII, HONDA DRZ110, HONDA CB400 TT, HONDA GB400 F, HONDA KLX125, HONDA KLX250 S, HONDA XL125 V
PFP Oil Filter
【What made you decide the purchase?】
In 2012 I searched Net for HONDA 's CRF 250 L Oil Filter I will ride, but without Hit, I searched HONDA' s CBR 250 R Oil Filter which is the same Engine, and this PFPOil Filter hit.
The price was the same price as HONDAOEM's Oil Filter, so I always purchase this PFPOil Filter and use it after that.
【How was it actually used?】
I am sure to replace the Oil Filter every time I travel every 10,000 km for every Oil change.
Until now I have been using this PFPOil Filter successfully without any Trouble.
【Mounting was difficult?】
If you remove 4 Bolt, Oil Filter Cover will come off, just remove the old Oil Filter inside and install a new Oil Filter.
Easy to do.
【Please tell me the installation point and hang】
When exchanging the Oil Filter, I think it is more efficient to exchange together when replacing the Engine oil.
In that case, make Motorcycle level, unplug Engine oil from Drain bolt, then loosen and remove 4 Oil Filter Cover Bolt.
I exchange the Oil Filter so as not to make a mistake, I close the Filter cover but if I replace Gasket for Filter cover once in 2 times Oil leakage will be less concerned is.
[Is there anything I was disappointed about?]
Until recently, I thought that it was the cheapest Oil Filter and purchased it over and over, but recently I found another more inexpensive same type Oil Filter on the market.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I have stocked several PFPOil Filters, but as soon as inventory runs out, we plan to order a cheaper third-party Oil Filter.
As for the price of this PFPOil Filter, please be able to study at the same price or less cheaply as other companies.
【Have you compared items?】
Previously compared with HONDAOEM Product, recently compared with cheaper KIJIMA made.
.
View detail
I bought it for WeightSetting
After changing inspiration and exhaust, I also changed the main jet and changed Pulley and Belt so I thought that Power came out so I thought I'd change the weight and thought I bought it.
I'm satisfied as I was looking for it because it is the cheapest for the time being.
I decided to try DoctorPulley when I decided.
View detail
Fits: YAMAHA JOG 3KJ, YAMAHA JOG 3RY, YAMAHA JOG 3YJ, YAMAHA JOG, YAMAHA APRIO, YAMAHA VINO
OEM TypeAir Filter
【What made you decide the purchase?】
It's cheap price anyway.
【How was it actually used?】
In a good way, there was no particular impact.
【Was it difficult to install? (Hard parts case)】
Depending on the type of car, it is easy to just remove the Air cleaner box. However, if it is an old car that does not maintain much, it may be hard to cure Nozzle to Carburetor.
【Please tell me the point of installation and hang (in the case of Hard parts)】
The Air cleaner box is sticky with Oil due to the repetition from Carburetor. Hand washing is easy with Gloves for oil-impermeable work. Also, neutral detergent is more economical to clean Air cleaner box than Parts cleaner. I think it would be better to have Brush and Bucket with hot water in winter.
[Is there anything I was disappointed about?]
I feel that it is somewhat thin. I feel that elasticity is also weak, but I think that it is not a problematic Level.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Where I want thicker thickness a little.
【Have you compared items?】
Degraded OEM Product. It became fragile and easily torn apart.
[Others]
Air cleaner box fits 3KJ ProductNo vehicles.
If you want to know if it fits your own vehicle, it is easy if you check if the 3 KJ stamp is on the lid of the Air cleaner box.
View detail
Purchase for Setting
I added a lot of additional CDI to ZOOMER, but I did not turn over 8000 unless I changed the weight.
8 g which was attached to High Speed ??Pulley is too heavy
Rotational speed does not rise and stall.
As I examine a lot of things, it seems good to try Light weight, so 4. 5 g ~ I bought some kinds
Now 5. At 5 g, the maximum speed is 12 Km / H Growth.
I tried a little more and thought about changing it to DrPulley when I decided.
That's why I recommend it for cheap because it's cheap..
View detail
Long distance is tough
Used with full Custom car of ADDRESS V 125
The photo shows the point of 4000 km
The cord of the SIDE part is gone.
It seems like a crack, but if you exchange frequently it might be okay?
I think that you can use it if you can manage it yourself and exchange it yourself.
This price is 1 for OEM / Price of 3.
So the number of usable distances is also 1 / It may be thought that it is 3.
Full normal cars I think that 5000 km can be used without problems.
If you can not exchange it yourself, the person who has trouble exchanging it will make Large people OEM.
Because I choose a user ☆ Three is ☆.
View detail
Fits: HONDA CB400 TT MKII, HONDA DRZ110, HONDA CB400 TT, HONDA GB400 F, HONDA KLX125, HONDA KLX250 S, HONDA XL125 V
PFP Oil FilterPF1005
I used it for CRF 250L, I think that the performance is the same as OEM. Wa Big has inventory, so it is always available for purchase, so it comes handy as you can get it when you want it.
By the way, the O-ring was attached. That was saved.
View detail
Fits: YAMAHA TOWNV80, YAMAHA TOWNV80 T80ED, YAMAHA JOG Zr "18A, YAMAHA JOG R "18A, YAMAHA MATE T50ED, YAMAHA MATE T50D, YAMAHA MATE, YAMAHA MATE T50D, YAMAHA MATE T50C, YAMAHA MATE T50C, YAMAHA MATE T50, YAMAHA MATE, YAMAHA MATE T50, YAMAHA TOWNV80, YAMAHA TOWNV80 T80D, YAMAHA TOWN MATE 50, YAMAHA TOWN MATE 50 T50, YAMAHA JOG, YAMAHA MATE T50ED, YAMAHA CYGNUS 125 Si
Same as Chinese Cheapest Item ...?
Although I was using Brake Shoe purchased at less than 300 yen, it is bad crying and its effectiveness also works against a suddenly and it is hard to use and it is terrible squeaking anyway
And since Shoe was sticking, I exchanged it
Look at the items that I received ...
Engraved together ... shape together ...
Maybe the same product ... ??
When…
Shoe image Left less than 300 yen
Right Side is PFP's Shoe
It is impossible for 2000 yen to be fixed price
I bought it because it was cheap this time ...
But it may be different material and so on ...
I tried to exchange it
Crying is terrible
No matter how much you did chamfer it was useless
If you scrape the surface, it fits to a certain extent but also it recurs again
If it is the same product, what extent is added at the package fee - -
I immediately exchanged for KITACO's Brake Shoe
The price difference from that of PFP company is 300 yen
After KITACO's Shoe, I have never been bothered by crying, and I am satisfied with the effectiveness as well as Large satisfaction
Would it have been better to buy that from the beginning ...
Temporarily this Shoe can not be Recommendation
If this is the same product, you can buy what is in a simple package at 280 yen
Can not Recommendation
View detail
O-ring comes with.
Even if you do not order it O - ring will come with it will be saved. I will bring this Filter to the Motorcycle store as I can not tamper with Motorcycle at all. View detail
Fits: HONDA CB400 TT MKII, HONDA DRZ110, HONDA CB400 TT, HONDA GB400 F, HONDA KLX125, HONDA KLX250 S, HONDA XL125 V
If Oil filtration PFP
PFP Oil Filter PF1005
Old Filter is always PFP from long ago.
There are other cheap Oil Filters, but I chose a PFP made reliably with a slightly higher price than the price difference of a few yen to ten or more yen.
A few yen to ten-odd yen, if you can afford security is cheap.
As Oil Filter is a consumable item, there is nothing to be cheap, but it is User's psychology that you want to use reliable products with confidence.
This PFP Oil Filter PF 1005 is pressed against the OilRoute on the Engine side by Spring in the Oil Filter Cover to filter Oil.
Every 10,000 km traveled (About once a year) We are replacing the Oil Filter, but the Rubber packing part of this PFP Oil Filter PF 1005 is running 10000 km (1 year period) We have not deteriorated at all, and we can not confirm the wear of the Filter itself.
However, in order to remove unnecessary iron powder and iron pieces secured in the Filter with Filter, it is a translation that is being replaced every year.
Regardless of the strength of Filter itself, perhaps running 30000 km (3 years) Even if it is used it is not used as a damaged Filter paper that is damaged - - - Maybe
That's what I say, this PFP Oil Filter PF 1005 is trustworthy.
Actually, once a year like me (Running 10000 km) Although I think that there are many people exchanging the Oil Filter every time, when reusing the Oil Filter to which the old Oil has adhered as it is, the Oil deterioration that the new Oil will be adversely affected by the old Oil is Because I have a sense of dislike - - -
I think that Oil Filter's own Life is sufficient, but I think that it will become psychology to say that Oil Filter will also be exchanged together!.
Even if Oil is a little dirty or old, if you are in it is Large.
Even if the Oil Filter is a little dirty or old, unless it is clogged it is Large.
Let's exchange the Oil Filter before it gets clogged.
In doing so, I recommend this PFP Oil Filter PF 1005 that I can reliably trust.
.
View detail
The blind spot orz
Well, because it is not NORMAL setting, I used the previous one and it was almost time to exchange and exchanged.
Initially - - - Yup. I thought it was as per the performance.
But recently I noticed w
Even though it is lighter and faster, 100k will come out - - - -
When I made Rose before this, the width of Belt was ww
Somehow I felt like I did not run out of the whole range of continuously variable speed ?? (Which is it?)
Perhaps, maybe I can buy a little narrow ??
I do not know whether there is - - - - - w
But normally I normally use it without problems now.
But, maybe - - - -
If you can solve the width - - - - Does the instantaneous power or high speed range grow ???
I will search for a while w
View detail
Oil change of SR 400 Initial Model
SR400Initial Model (2H6) When exchanging Oil, we exchanged together.
Oil Filter and Filter coverGasket and O-ring are also included.
Not only Filter but also Gasket and O-ring can be exchanged together, so it was good.
I think I will choose the product of this Manufacturer next time as well.
View detail