Reviews
OEM Compatible Filter
Air filters for mopeds, especially filters for slightly older 2-stroke models, are generally made of urethane foam.
This sponge filter deteriorates due to the gasoline component of the blowback, resulting in a terrible condition like that of the STELLA.
This time, I prepared it for the carburetorOH of JOG remote control, which had been neglected for a while.
I worked on it and found that it was still torn up in the air cleaner box, so I quickly replaced it.
Size was also generally usable without any problems.
The difference from OEM is that engine oil and filter oil must be applied since the oil is not soaked into the engine.
In my case, I put about 5cc of engine oil on FilterSponge, put it in a Vinyl bag, and spread it around as if holding it. I applied the oil by squeezing the Vinyl bag and spreading it around.
Too much will cause resistance, too little will reduce the ability to filter sand dust.....................
If you are concerned about it, place it on the ground between sheets of newspaper and step on it after applying it. The newspaper will absorb the excess oil and become a good ambai.
If Oil was applied in the right amount, it would be 5 stars.
View detail
Fits: HONDA Byte AF59, HONDA ZOOMER AF58, HONDA Smart Dio, HONDA Smart Dio AF56, HONDA CREA SCOOPY AF55, HONDA Byte AF59, HONDA ZOOMER AF58, HONDA Smart Dio, HONDA Smart Dio AF56, HONDA CREA SCOOPY AF55
PMP Air filter
I replaced it myself.
I replaced it with a replacement with no problems.
View detail
Very convenient
I bought this for the Restore of my old Small Type Motorcycle. I could not find a better price for such a large size. It is also very convenient for mowing etc. I bought two of them because the shipping cost is the same for one or two sheets. The shipping cost is the same for one or two pieces, so I bought two pieces in Point. I think I made a very good purchase. View detail
It arrived quickly.
Large, cheap and cosy! Can be used for anything, motorcycle, mower, etc. View detail
Fits: HONDA Byte AF59, HONDA ZOOMER AF58, HONDA Smart Dio, HONDA Smart Dio AF56, HONDA CREA SCOOPY AF55, HONDA Byte AF59, HONDA ZOOMER AF58, HONDA Smart Dio, HONDA Smart Dio AF56, HONDA CREA SCOOPY AF55
Cheap! No problem as an OEM alternative.
I used it to service my son's Scooter, it was cheaper than OEM and I decided on price.
OEM $1,600→PFP $550! 1/3 the price.
The amount of filter paper folded, or total area, is comparable to the OEM, and I think the performance is the same.
Because the tube of Blowby gas is connected to the air cleaner box of 4CycleMODEL, the inside of the air cleaner box may be dirty with oil depending on the usage.
The working procedure is like this…
1. Remove the screw of Plus which is stopping the lid of Air cleaner Box in about 6 places.
2. remove the lid
3. Remove the dirty Filter.
4. Clean the inside of the box if it is dirty.
5. Install the new Filter in the same direction as the one you removed.
6. Attach the lid to the overtorque with care (wood screws).
Because it was not so dirty this time, no cleaning is required and the work is completed in 5 minutes.
The color of the filter paper of the PFP Air Filter was the same as that of the OEM Air Filter, Green, so it looked so OEM-like that it was hard to tell the difference.
It is easy to neglect the maintenance of a scooter, but regular maintenance of the oil, plug, brake, and drive system will help maintain safety and performance.
View detail
Fits: HONDA LIVEDio|J|SR|ST|ZX AF34, HONDA LIVEDio|J|SR|ST|ZX AF35
Cheap and good!
I was able to Fit and use it with no problem!
It is cheap and I am satisfied.
View detail
Fits: HONDA LIVEDio|J|SR|ST|ZX AF34, HONDA LIVEDio|J|SR|ST|ZX AF35
For Refresh
Purchased a new Belt, Pulley and Weight Roller for the Live DIOZx Refresh.
In order to open Crankcase, because it had to remove the Air Cleaner BOX on the structure, I exchanged it in addition because it is the thing of several hundred yen.
I changed it and put it on because it's not particularly different, but it feels better with a new one.
View detail
Fits: HONDA Dio(AF18) Late, HONDA Dio(AF18) Late
OEM same etc.
I don't like the sound of the noisy Power Filter, so I bought an OEMAir cleaner box at Yahoo auctions, bought an Element here and returned to the OEM. View detail
Comparable to OEM Products
This is the air filter for GRAND MAJESTY 400.
Quantity:Pair (for Left and Right) I bought and replaced them at the same time.
It will be replaced at 29,000km.
It is the same shape as OEM, so it is easy to install.
Quantity:Pair (for Left and Right) The total cost was 2,772 yen; OEM was 4,521 yen, so it was 1,749 yen cheaper.
View detail
as good as it gets
This is the air filter for GRAND MAJESTY 400.
It is comparable to OEM products.
It can be installed as is.
OEM Product is Quantity:Pair (for Left and Right) It costs $4,521 at a discounted price.
View detail
Filter
Visually very decent quality. I got up perfectly. I didn't have to cut anything. I was especially pleased with the delivery to St. Petersburg, less than three weeks. Visually very decent quality. I got up perfectly. I didn't have to cut anything. Particularly pleased with the delivery to St. Petersburg, less than three weeks. translated by google translate View detail
Easy to use
Easy to use and inexpensive, Cut in Scissors and Engine oil If it gets dirty, wash the whole thing with kerosene
Let it dry and you can use it a few times!
View detail
Filter made by Air Purifier
Intake air filter of the air cleaner made it for own production to stop production. Adhered two sheets of Filter, cut it according to the shape of the original Filter base, and glued. Since the eyes are slightly finer than the original Filter, garbage exchange is good. It is satisfactory that it can be repaired cheaply, although it is not purposeful.
View detail
Fits: YAMAHA JOG 3KJ, YAMAHA JOG 3RY, YAMAHA JOG 3YJ, YAMAHA JOG, YAMAHA APRIO, YAMAHA VINO
OEM TypeAir Filter
【What made you decide the purchase?】
It's cheap price anyway.
【How was it actually used?】
In a good way, there was no particular impact.
【Was it difficult to install? (Hard parts case)】
Depending on the type of car, it is easy to just remove the Air cleaner box. However, if it is an old car that does not maintain much, it may be hard to cure Nozzle to Carburetor.
【Please tell me the point of installation and hang (in the case of Hard parts)】
The Air cleaner box is sticky with Oil due to the repetition from Carburetor. Hand washing is easy with Gloves for oil-impermeable work. Also, neutral detergent is more economical to clean Air cleaner box than Parts cleaner. I think it would be better to have Brush and Bucket with hot water in winter.
[Is there anything I was disappointed about?]
I feel that it is somewhat thin. I feel that elasticity is also weak, but I think that it is not a problematic Level.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Where I want thicker thickness a little.
【Have you compared items?】
Degraded OEM Product. It became fragile and easily torn apart.
[Others]
Air cleaner box fits 3KJ ProductNo vehicles.
If you want to know if it fits your own vehicle, it is easy if you check if the 3 KJ stamp is on the lid of the Air cleaner box.
View detail