Reviews
Fold creases...
The shape is perfect for a dedicated product.
The needle insertion point was roomy and easy to work with, as if it were made a little larger than the OEM.
The crease is quite prominent.
The discoloration has not yet reached the point of discoloration, so I think it will become less noticeable if it is treated properly.
However, I think that this is unavoidable because of the low price.
I use a very cheap Chinese Air Tucker, much easier than Handy.
View detail
Fits: SUZUKI Suzuki Address V125, SUZUKI Suzuki Address V125
choice goods
Thank you for your prompt response.
Motorcycle Seat has been scratched and faded over time.
I purchased it for reupholstering at
I am satisfied with the Large change in terms of cosmetics.
I look forward to working with you again when the opportunity arises.
View detail
It was easy.
Seat has a hole in it and my butt is wet, so I replaced it.
With a big Stapler, it wasn't too hard.
Glad to see you're clean.
View detail
Fits: SUZUKI ADDRESS V100, SUZUKI Address V100, SUZUKI Address V100
Easy to use.
I purchased the Super Dio AF28 for the Super Dio AF28.
It stretches well and can be stretched neatly.
The quality is good enough.
However, unlike OEM, there are seams in each part, so this is a concern for water seepage.
Third-party products are probably all the same, so with that in mind, this is a good enough product.
Size feel is good.
The design, cutting, and sewing are both fit, sturdy, and good.
Since the product comes folded, the folds will be visible even if it is stretched at first.
However, it grew and disappeared over time.
Well and pulling and stretching seem to be important.
The cost performance is excellent because the price is reasonable and the quality is adequate.
I felt I could buy Repeat.
View detail
Fits: SUZUKI Suzuki Address V125, SUZUKI Suzuki Address V125
choice goods
To reupholster my partner due to age and deterioration.
It was the product I ordered.
Thank you for the fast response.
I am satisfied with the Large change in terms of quality cosmetics.
I look forward to working with you again when the opportunity arises.
View detail
Fits: HONDA SMARTDio AF56, HONDA SMARTDio DX AF57, HONDA SMARTDio Z4 AF63, HONDA Smart Dio Z4 AF63, HONDA Smart Dio DX AF57, HONDA Smart Dio AF56, HONDA Smart Dio Z4 AF63, HONDA Smart Dio DX AF57, HONDA Smart Dio AF56
Tucker makes it easy to Refresh!
I've torn the Seat on my moped Scooter, so I'm thinking of putting a Cover on it that can be One-touch mounted with Rubber.
I thought about reupholstering it, but if I was going to do that, I wanted to reupholster it properly like a new car, so I bought a Kawi.
Tucker was easy because I was able to rent an Air tool (Air Tucker) and I have a Compressor at home.
Even if you don't have the equipment, you can use a HandTucker sold at Daiso for about 500 yen to do the job.
However, make sure you have a needle (core) with a short foot. I used a width of 10mm and a foot of 6mm.
The Tucker cores that often come with TuckerBody have long legs, and if you use them to reupholster your Seat, they will stick out on the surface, so please don't use them.
Please refer to youtube and other sites for more information on how to do this.
Decide before and after, Quantity:Pair (for Left and Right) Decide on ... and hit the Tucker while pulling on the diagonal.
If you cut the excess part at the end, the opening and closing of Helmet in (Seat) also becomes smooth.
The finish is much better than the so-called Rubber type Cover, and it feels good ~.
I'm glad I took the DIY challenge to reupholster the seat, because cracks and holes in the seat can cause rainwater to seep into clothes, which is uncomfortable.
View detail
Fits: YAMAHA Majesty 125 (SE271)(5CA), YAMAHA Majesty 125 (SE02)(5CA), YAMAHA BWS125 (46P), YAMAHA BWS125 (5S9), YAMAHA Cygnus X (SE12J)(5TY), YAMAHA Cygnus X (SE44J), YAMAHA Cygnus X 4C6, YAMAHA Cygnus X 1MS, YAMAHA Cygnus X 1CJ, YAMAHA Majesty 125 (SE271)(5CA), YAMAHA Majesty 125 (SE02)(5CA), YAMAHA BWS125 (46P), YAMAHA BWS125 (5S9), YAMAHA Cygnus X (SE12J)(5TY), YAMAHA Cygnus X (SE44J), YAMAHA Cygnus X 4C6, YAMAHA Cygnus X 1MS, YAMAHA Cygnus X 1CJ
CYGNUS' pre-existing condition has been cured!
The phenomenon known as CYGNUS preexisting conditions has become a frequent occurrence.
This is a condition where the Engine stops working after running.
If you stop at Convenience or other places on the way to your destination and turn off the Engine, you will be stuck in Convenience.
Also, in hot summers, just being in the sun doesn't take the Engine.
The Cell turns, but the fuel pump is faulty and the Engine does not work.
If your car is a FOR JAPAN MODEL car, you can get a recall for free, but my car was a Taiwanese model 2, so it's not eligible for a recall.
The OEMs only have a fuel pump assembly, which I heard costs tens of thousands of dollars, but this one is relatively inexpensive, so I was a little worried about it, but I bought it.
For installation, I refer to the following site.
https://www.google.co.jp/amp/s/gamp.ameblo.jp/atop-parts/entry-12184650051.html
It took some time to put on and off the Foot Board, but the exchange is somehow completed.
Since then, my pre-existing condition has improved, and now I can ride with no worries!
I should have replaced it sooner if it would be so comfortable just to not have to worry about the Engine taking on Smooth and stopping.
View detail
Fits: YAMAHA JOG 3YJ, YAMAHA JOG ZR, YAMAHA JOG 3YK, YAMAHA JOG ZR, YAMAHA JOG 3YK, YAMAHA JOG 3YJ, YAMAHA JOG ZR, YAMAHA JOG 3YK, YAMAHA JOG 3YJ
It can be used normally.
Glue from the back of the Seat cover seam to protect the Seat Sponge from moisture. and installed on top of the Sponge covered with Polyethylene Seat. It was. You will need a strong Tucker to install it. It can be used normally. View detail
Fits: YAMAHA JOG 3YJ, YAMAHA JOG ZR, YAMAHA JOG 3YK, YAMAHA JOG ZR, YAMAHA JOG 3YK, YAMAHA JOG 3YJ, YAMAHA JOG ZR, YAMAHA JOG 3YK, YAMAHA JOG 3YJ
You need the knowledge!
The Seat was torn, so I replaced it with a new Seat The texture is so new
It slips when you sit down At first, I thought it was inevitable
Later, if you've never replaced a new Seat, you'd better get a motorcycle shop to do it for you!
View detail
Fits: YAMAHA JOG 3YJ, YAMAHA JOG ZR, YAMAHA JOG 3YK, YAMAHA JOG ZR, YAMAHA JOG 3YK, YAMAHA JOG 3YJ, YAMAHA JOG ZR, YAMAHA JOG 3YK, YAMAHA JOG 3YJ
no comment
I had an old motorcycle with a Seat tear, so I decided to get a new Cover
I ordered it I haven't received the parts yet, so I'll re-improve them as soon as they arrive!
View detail
Fits: HONDA DIO AF34, HONDA DIO AF35, HONDA DIO [Dio] AF35, HONDA DIO [Dio] AF34, HONDA DIO [Dio] AF35, HONDA DIO [Dio] AF34
Better than price
We bought Seat cover of Yamaha Fo - Gel 50 about 2 places so I bought it, but a little Small Feeling I wound a Seat cover I broke under it broke. View detail
Fits: HONDA DIO AF28, HONDA DIO AF27, HONDA DIO [Dio] AF28, HONDA DIO [Dio] AF27, HONDA DIO [Dio] AF28, HONDA DIO [Dio] AF27
It is Repeater. Seat's Refresh is Exactly.
Completion will rise considerably depending on ingenuity.
☆ Four items are Waterproof - I thought it would be nice to have some more fabric thickness.
- Rain may penetrate from the seam → Seat thinly paint Silicon sealant on the entire back side, Seat Urethane foam is pre-rice bag etc etc. We put it in a heavy plastic bag of a Completely Waterproof.
Hardness when sitting is covered with Urethane foam Poly bag etc. etc. I am adjusting with.
Urethane foam leakage measures are necessary, but there is no problem at all other than doing it.
Because the fabric is soft, the feeling of mouth is quite good. Even if it is thin it does not matter for durability.
Personally I think that it may be a bit thicker.
Please fasten Tucker exactly while pulling it.
It is glossy than OEM, but it is not enough.
View detail
MAJESTY 125 Air filter self-made
Filter of OEM Product does not have any problem, but it gets dirty soon so I created it by UniversalAir filter. Quantity : 1pc. In, Quantity : 1 Set of 4pcs. It is likely to make minutes. Because it just cuts according to the mold, you can make various. View detail
Air Filter homebrew
Air Filter for Across Due to own making, I bought it. OEM Product of Paper Base is also a good product, but when it got dirty, it was exchange compatible, so I made it for myself. Intake resistance seems to be small, I feel that the rise has improved slightly. Fuel consumption is now. View detail
Fits: HONDA DIO AF34, HONDA DIO AF35, HONDA DIO [Dio] AF35, HONDA DIO [Dio] AF34, HONDA DIO [Dio] AF35, HONDA DIO [Dio] AF34
Satisfied
I replaced the Seat that was full of holes.
It is a place where taste is sharp and preference is divided, but I do not mind. Although it is natural, since it is folded and sent, if you actually stop at Seat with Tucker, the crease will be left. But I do not care.
View detail