Reviews
watchman
I always buy this product.
It's expensive, but the tip is sturdy and fits the screw.
Very easy to use
We do have some thicker Grip products.
The force is easily applied when tightening, which can lead to overtorque.
I like this one just as much as the other one, which can be tightened just fine.
Grip has a distinctive smell, so tastes vary.
View detail
I bought it to adjust my glasses. I love it!
I bought it to tighten up my little Screw from Glasses.
I love it, I've never bought anything else from PB products.
This is the only way I can tell, but the common Chinese DriverKit looseness is not here, as it should be.
View detail
PB is good
It doesn't have that distinctive PB smell!
If you use a lot of blades with one Grip, you can get a lot of blades
It can be changed into various drivers
View detail
Ease of use as expected.
Purchased for Carburetor OH. Satisfied with ease of use as expected.
There is only high, it is also convincing that it is expensive.
However, this Driver's Blade is a Taper type, not a Type with a famous step.
Type with a step is "Swiss grip" It is Type.
View detail
I increased the type because I bought it before.
PB 206S - 3 Ball Point Hexagonal Bar Screwdriver I bought earlier was easy to use
I bought 206S-4 and 206S-5.
View detail
I increased the type because I bought it before.
PB 206S - 3 Ball Point Hexagonal Bar Screwdriver I bought earlier was easy to use
I bought 206S-4 and 206S-5.
View detail
Easy to use
I bought it for disassembly assembly of Carburetor.
I bought to shorten the maintenance time as it is a Ball point. After all it is safe for PB products. I would like a Lineup of the Ball point Hexagonal Bar Driver which is a little longer if possible.
View detail
It's fine.
I always use KTC at home, MAC at shop, but I wanted another and bought it.
I was bought for the first time PB but it is quite nice.
Screw will loosen as you cling to it.
It is also nice to have a hexagon at the base.
Although it is good to stick to Manufacturer, since I think that each Manufacturer specialty field is there, I have recently bought and tried various other Manufacturer specializing in specialty fields.
View detail
Exactly to Jet
(1) I am using it for Carburetor's low Jet exchange.
(2) I can join Exetly in the groove of Jet, I can turn Jet without play, I will not hurt Jet.
(3) Part of the Black at the tip will be peeled relatively quickly. I use it only a few times a year, but I got a little peeled off in about 3 years.
(4) Grip smells a little when it is wet or when it gets wet with rain.
View detail
-Driver's male
【What made you decide the purchase?】 Speaking of the male of -Driver PB!
【How was it actually used?】 I bought it for 2 types of electric worker examinations. (eh?) It is easy to bend the nail of OutletPlate when the tip is parallel.
[Is there anything I was disappointed about?] I have not been beating it yet, will not it be lost if I hit it?
【Hope for Manufacturer - Please tell me if you have any improvements】 Grip's unique Smell ,,,
【Have you compared items?】 About Nepros?
View detail
Since No. 2 of a Plus is a product certainly used for a Motorcycle Maintenance, use of a cheap Driver is strict prohibition! Too, unlike a cheap article, as a Screw sticks fast, it can turn.Since a stamp for which the Grip end also understands a
Since No. 2 of a Plus is a product certainly used for a Motorcycle Maintenance, use of a cheap Driver is strict prohibition!
Too, unlike a cheap article, as a Screw sticks fast, it can turn.Since a stamp for which the
Grip end also understands a kind at a glance is carried out, the feature is intelligible.
View detail
The Quality of PB is the highest with a Reasonable comparatively.Since the Shaft is thicker than usual 1 mm, a rigid feeling when a Torque is imposed is very good, and the ease of grasping of a Grip, the die length of a just right Shaft, and the merit tha
The Quality of PB is the highest with a Reasonable comparatively.Since the Shaft is thicker than usual 1 mm, a rigid feeling when a Torque is imposed is very good, and the ease of grasping of a Grip, the die length of a just right Shaft, and the merit that suiting inserts in are the highest.
Although work using a Driver is improved, it is a favorite of No. 1.
View detail
。 which should be used if it tampers with a fine Screw Merit which suiting inserts in the Grip which is easy to turn.It is a good Driver which can perform delicate work.It does not become a comparison to the precision driver of the cheap article.
。 which should be used if it tampers with a fine Screw
Merit which suiting inserts in the Grip which is easy to turn.It is a good Driver which can perform delicate work.It does not become a comparison to the precision driver of the cheap article.
View detail
All Drivers have used PB regularly. The grasped feel is not too soft, is not too hard, and is an exquisite gripping feeling. I think that Grip form is also the form which adapts itself to a hand dramatically. Although a Dri
All Drivers have used PB regularly.
The grasped feel is not too soft, is not too hard, and is an exquisite gripping feeling.
I think that
Grip form is also the form which adapts itself to a hand dramatically.
Although a Driver point also has a dramatically sharp angle and is easy to be injured in case of a cheap Slotted screwdriver again, I think that the safe side is also considered since the thing of PB has taken R delicately.
Once it uses [
] PB, no Drivers other than PB will get used to the mind care.
Although it is somewhat expensive, it is so good a Driver.
View detail
Although 6190 Serieses of a Multi-craft grip had been used for years, frequency in use updated 1-2 highly worn out to 8190 of the Swiss grip. About the height of Blade extremity end size accuracy, a Shank without the feeling into which straddle
Although 6190 Serieses of a Multi-craft grip had been used for years, frequency in use updated 1-2 highly worn out to 8190 of the Swiss grip.
About the height of
Blade extremity end size accuracy, a Shank without the feeling into which straddle is likely to be effective and is likely to break, and a Blade called a tough Plating, it is not changeful no one but [ PB ].
The good barrel type Grip of torque transmission belonged to the Multi-craft that it is easy to hold, and it became kinder to a palm, leaving the hard feeling of a core by having become 2 layer structure.
Although not surveyed, there is feeling from which the Grip became a round byway to the same Blade.
About the
Blade, it is PB truly, finishing at a tip is wonderful, and if it is a new Screw, a Blade sticks to Riseth with ピタリ and is like [ which does not need a Magnet, either ].
The accident which is [ the same barrel type Grip as a Multi-craft ] 力入れ-easy also in the direction forced vertically, and comes out is also suppressed at worst.
The hips of a Grip are classified by color for every classification, and, probably, tip-shaped a Symbol and a Size are greatly shown by the point that the
Swiss grip should be mentioned especially.
Although I have tens of Multi-craft grips,
Because it may be altogether troubled by discernment (there is also a field good therefore) with the barrel type of the same orange if an old thing is also included although the latest thing has the display of a classification Size in the hips -- Even if again had from a Multi-craft, there is no dissatisfaction in particular,
A Swiss grip will be chosen when updating from now on.
View detail
The phillips screwdriver of the 6190 Series Multi-craft grip is arranged with 0-1-2-3. Although frequency in use updated recently 1-2 highly worn out to 8190 of the Swiss grip, even now, 0 and 3 are active services. For the good barrel type Grip and me
The phillips screwdriver of the 6190 Series Multi-craft grip is arranged with 0-1-2-3.
Although frequency in use updated recently 1-2 highly worn out to 8190 of the Swiss grip, even now, 0 and 3 are active services.
For the good barrel type Grip and me of the height of
Blade extremity end size accuracy, a Shank without the feeling into which straddle is likely to be effective and is likely to break, a tough Plating, a grip, or the torque transmission that becomes empty, he is the No.1 partner.
Especially finishing at the tip of a Blade is wonderful, and if it is a new Screw, a Blade sticks to Riseth with ピタリ and is like [ which does not need a Magnet, either ].
The accident which is [ a barrel type Grip ] 力入れ-easy also in the direction forced vertically, and comes out is also suppressed at worst.
As a feature common to the
Multi-craft grip,
It is lost as it is used, although the surface is considering it as ザラッ at first,
If it stinks and the green of POZI is removed, all also of TORX, HEX, a Plus, and a Minus will be the orange form, and is the latest product a point with the thing peculiar [ at the time of a new article ] troubled by discernment although a Multi-craft also has printing of discernment in the hips of a Grip?
Since no less than 8190 Serieses with the Swiss grip of a round thin figure with cushioning properties can be chosen now [
] and 8193 / D Series of the/penetration with Shank origin 6 angle can also be chosen, it is dependent on liking.
View detail
Although 6100 Serieses of a Multi-craft grip are used for years and there was also no necessity for updating in particular, since some were quite cheaper than a single article total price by why, a Plus, and a Set, it purchased with the proof of the puddi
Although 6100 Serieses of a Multi-craft grip are used for years and there was also no necessity for updating in particular, since some were quite cheaper than a single article total price by why, a Plus, and a Set, it purchased with the proof of the pudding is in the eating.
About the height of
Blade extremity end size accuracy, a Shank without the feeling into which straddle is likely to be effective and is likely to break, and a Blade called a tough Plating, it is not changeful no one but [ PB ].
The good barrel type Grip of torque transmission belonged to the Multi-craft that it is easy to hold, and it became kinder to a palm, leaving the hard feeling of a core by having become 2 layer structure.
Although not surveyed, there is feeling from which the Grip became a round byway to the same Blade.
About the
Blade, it is PB truly, finishing at a tip is wonderful, and since especially Blade tip form is not a common Taper but parallel, since the ball and the angle are beveled to Riseth of the Screw head, ピタリ is satisfactory [ the angle ] also at a countersunk head to him.
Conversely, in the place premised on the tapered shape Blade for the 電工 use, since it may be hard to use as unexpected, a thing to be warned is the same as usual.
The hips of a Grip are classified by color for every classification, and, probably, tip-shaped a Symbol and a Size are greatly shown by the point that the
Swiss grip should be mentioned especially.
Although I have tens of Multi-craft grips,
Because it may be altogether troubled by discernment (there is also a field good therefore) with the barrel type of the same orange if an old thing is also included although the latest thing has the display of a classification Size in the hips -- Even if again had from a Multi-craft, there is no dissatisfaction in particular,
A Swiss grip will be chosen when updating from now on.
View detail
The Slotted screwdriver of the 6100 Series Multi-craft grip has kept step with 3-4-5-6. Does the part where a Slotted screwdriver plays [ Pivot bolt / mixture adjustment of a Hose clamp or a carburetor, / of a Lever ] an active part still more depending
The Slotted screwdriver of the 6100 Series Multi-craft grip has kept step with 3-4-5-6.
Does the part where a Slotted screwdriver plays [ Pivot bolt / mixture adjustment of a Hose clamp or a carburetor, / of a Lever ] an active part still more depending on a vehicle type in Motorcycle maintenance remain?
For the good barrel type Grip and me of the height of
Blade extremity end size accuracy, a Shank without the feeling into which straddle is likely to be effective and is likely to break, a tough Plating, a grip, or the torque transmission that becomes empty, he is the No.1 partner.
Since especially Blade tip form is not a common Taper but parallel, since the ball and the angle are beveled to Riseth of the Screw head, their ピタリ is satisfactory also at a countersunk head to him.
Conversely, since it may be hard to use as unexpected, cautions are required in the place premised on the tapered shape Blade for the 電工 use.
As a feature common to the
Multi-craft grip,
It is lost as it is used, although the surface is considering it as ザラッ at first,
If it stinks and the green of POZI is removed, all also of TORX, HEX, a Plus, and a Minus will be the orange form, and is the latest product a point with the thing peculiar [ at the time of a new article ] troubled by discernment although a Multi-craft also has printing of discernment in the hips of a Grip?
No less than 8100 Serieses with the Swiss grip of a round thin figure with cushioning properties can be chosen now [
], and it is dependent on liking.
View detail